Altronix TROVE T1RAG3F8 Manuel utilisateur

T1RAG3F8

Fully assembled kit includes:

- Trove1R rack enclosure with TAG1R Altronix/AMAG backplane

- (1) eFlow6NB - Power Supply/Charger

- (1) VR6 - Voltage Regulator

- (1) ACMS8 - Fused Dual Output Access Power Controller

Access & Power Integration

Rev. T1RAG3F8_031021 More than just power.TM

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

Installation Guide

All registered trademarks are property of their respective owners.

All components of this Trove kit are UL Listed sub-assemblies.

Please refer to the included corresponding

Sub-Assembly Installation Guides for further information.

- 2 - T1RAG3F8 Installation Guide

Overview:

Altronix T1RAG3F8 Trove rack kit is pre-assembled and consist of Trove rack enclosure/backplane with factory

installed Altronix power supply/charger and sub-assemblies. Kits accommodate up to two (2) AMAG M4000

modules for up to eight (8) doors in a single enclosure.

Configuration Chart:

Altronix

Model

Number

120VAC

60Hz

Input

Current

Power

Supply

Board

Input

Fuse

Rating

Power

Supply

Board

Battery

Fuse

Rating

Nominal DC

Output Voltage Maximum Supply

Current for Main

and Aux. Outputs on

Power Supply board

and ACMS8 Access

Power Controller’s

outputs

Fail-Safe/

Fail-Secure or

Dry Form “C”

Outputs

ACMS8

Board

Input

Fuse

Rating

ACMS8

Board

Output

Fuse

Rating

[DC] [Aux]

Output

Range

(VDC)

Output

Range

(VDC)

T1RAG3F8 3.5A 5A/

250V

15A/

32V

20.17-

26.4

20.28-

26.4 24VDC @ 5.4A 815A/

32V

3A/

32V

Hardware and Accessories:

Specifications:

Spacer | 5/16” Pan Head Screw | Lock Nut

Agency Listings:

• CE European Conformity.

Mechanical:

• Black enclosure with ample knockouts for

convenient access.

• Includes: tamper switch, cam lock and

mounting hardware.

• Modular 2U standard EIA 19” drawer with

extendable slides up to 48”.

• Dimensions (H x W x D): 3.375” x 19.0” x 26.5”

(85.8mm x 482.6mm x 673.1mm)

Included Accessories:

• One (1) tamper switch

(Altronix Model TS112 or equivalent).

• Cam lock.

Available Accessories (not included):

• RE2: Rack Mount Battery Enclosure

accommodates up to four (4) 12VDC/7AH batteries.

• WM5, WM25, WM100: Magnetic Cable Tie Mounts

(5, 25, 100 counts).

T1RAG3F8 Installation Guide - 3 -

Installation Instructions for T1RAG3F8:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local

codes and authorities having jurisdiction. These products are for indoor use only and must be installed within

the protected premises.

Note: First assemble and Install Z Bracket Wire Management Accesory

(refer to Z Bracket Installation pg. 4)

1. Remove backplane from enclosure prior to installing into rack cabinet

(do not discard hardware).

2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or

equivalent) turn the enclosure upside down. Punch out the knockout in

designated location, on the back of the unit, from outside of the drawer

(Fig. 1, pg. 3). Insert the tamper switch into the knockout from outside of the

drawer with the button facing outwards and spaded connectors inside the drawer.

Connect tamper switch wiring to the Access Control Panel input or the

appropriate UL Listed reporting device.

To activate alarm signal open the rack drawer.

3. Slide the rack enclosure into an open 2U location in the four post rack cabinet.

4. Utilizing proper fasteners attach front ears to the rack rails.

5. Attach the rear of the adjustable slides to the rear rails of the rack cabinet with the proper fasteners.

6. Secure the rack cover (Fig. 2a, pg. 3) and rack drawer to earth ground (Fig. 2b, pg. 3).

7. Ensure that all internal cofigurations (voltage selection, switch settings, etc.) are completed before

mounting backplane back into Trove rack enclosure.

8. Refer to the eFlow Power Supply/Charger Installation Guide for eFlow6NB,

and corresponding Sub-Assembly Installation Guide for ACMS8and VR6 for further installation instructions.

Fig. 1

Back of the drawer,

viewed from outside.

Tamper Switch

mounting location

Fig. 2

Fig. 2a

Fig. 2b

- 4 - T1RAG3F8 Installation Guide

Assembling and Attaching

Z Bracket Wire Management Accessory (included):

Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.

Hardware (included):

Ten (10) bolts and eight (8) lock nuts.

1. Carefully unpack Z Bracket. Do not discard hardware

(included) (Fig. 3, pg. 4).

2. Attach arms to each other using bolts and

lock nuts (Fig. 3a, pg. 4).

3. Attach the hinge brackets to the ends of

arms using bolts and nuts positioning

them as shown on (Fig. 3b, pg. 4).

4. Make sure that all nuts are tightened.

5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable slide using bolts and lock nuts

(included) (Fig. 4, 4a, pg. 4).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts

(included).

Fig. 4

Fig. 4a

Fig. 3b

Two (2)

Fig. 3

Fig. 3a

T1RAG3F8 Installation Guide - 5 -

T1RAG3F8:

Configuration of AMAG M4000 Modules

1. Align the AMAG M4000 modules on the backplane to match the boards’ mounting holes with

corresponding pems.

2. Fasten spacers (provided) onto metal pems (Fig. 5a, pg. 3).

3. Mount AMAG M4000 modules to spacers utilizing pan head screws (provided) (Fig. 5a, pg. 3).

Note: AMAG M4000 modules have one (1) screen. Please make sure that they are mounted correctly,

as shown in Fig. 5 below.

4. Fasten TAG1R backplane to Trove1R rack enclosure utilizing hardware (provided).

Fig. 5

Altronix - eFlow6NB

L G N

DCAC1 1min

enable

2hr.

disable

OFF - 24V

ON - 12V

TRIGGER EOL

SUPERVISED

--- BAT+ --- DC +

NC C NO

AC FAIL

NC C NO

BATFA IL

+AUX ---

NO GND

RESET

Altronix - ACMS8

PWR1 +

PWR2 +

COM -

PWR2 +

PWR1 +

+ PWR2 --

+ PWR1 --

VR6 is

mounted

under

ACMS8

AMAG - M4000

SCREEN

AMAG - M4000

SCREEN

To IEC

connector

To LED

lense

Pem

Spacer

Backplane

Pan Head

Screw

Hirsch

Controller/Accessory

Fig. 5a

- 6 - T1RAG3F8 Installation Guide

Notes:

T1RAG3F8 Installation Guide - 7 -

Notes:

- 8 - T1RAG3F8 Installation Guide

Trove1R Enclosure Dimensions:

3.375” x 19.0” x 26.5” (85.8mm x 482.6mm x 673.1mm). Shown with Z Bracket attached.

0.1”

2.5mm

1.5”

38.1mm

11.175” (283.8mm)

2.4”

61mm

4.57”

116.1mm

3.375”

85.8mm

26.5”

673.1mm

19” (482.6mm)

R 1.27” (32.3mm)

1” (25.4mm)

0.55” (14mm)

3.62”

92mm

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty

IIT1RAG3F8 I01U MEMBER

Table des matières

Autres manuels Altronix Enceinte

Altronix

Altronix Trove1HW1R Manuel utilisateur

Altronix

Altronix Trove2M2R Manuel utilisateur

Altronix

Altronix Trove T1PDK7F24 Manuel utilisateur

Altronix

Altronix TROVE Trove2KS2 Manuel utilisateur

Altronix

Altronix Trove T1RAL13F8P8 Manuel utilisateur

Altronix

Altronix TROVE TDMD2 Manuel utilisateur

Altronix

Altronix Trove T1PHK1F4S Manuel utilisateur

Altronix

Altronix TROVE T1DMK3F4 Manuel utilisateur

Altronix

Altronix Trove2M2 Instructions d'utilisation et d'entretien

Altronix

Altronix Trove T2KSK3F8 Manuel utilisateur

Altronix

Altronix TROVE T2PXK7F8DV Manuel utilisateur

Altronix

Altronix Trove2BL2 Manuel utilisateur

Altronix

Altronix Trove2 Manuel utilisateur

Altronix

Altronix TROVE Trove3WC Series Manuel utilisateur

Altronix

Altronix Trove T2MK3F4D Manuel utilisateur

Altronix

Altronix Trove2DM2 Manuel utilisateur

Altronix

Altronix Trove T3MK75F16 Manuel utilisateur

Altronix

Altronix TROVE Trove2HW2 Manuel utilisateur

Altronix

Altronix TROVE T1RAG3F8 Manuel utilisateur

Altronix

Altronix trove1m1 Manuel utilisateur

Altronix

Altronix TROVE Trove1PD1 Manuel utilisateur

Altronix

Altronix Trove T1RSH3F8 Manuel utilisateur

Altronix

Altronix TROVE T2MK3F4 Manuel utilisateur

Altronix

Altronix Trove1HW1R Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur