Alto SPIN 43 DS Manuel utilisateur

SPIN 43

SPIN 43 HS

SPIN 43 DS

Betriebsanleitung ...........................3

Operating Instructions .................. 16

Notice d'utilisation ....................... 29

Gebruiksaanwijzing ...................... 42

Istruzioni sull'uso ......................... 55

Driftsinstruks................................ 69

Bruksanvisning ............................. 81

Driftsvejledning ............................ 94

Käyttöohje ................................. 107

Navodilo za uporabo................ 120

Uputstvo za rad......................... 133

Prevádzkový návod .................. 146

Provozní návod ......................... 159

Instrukcja obsługi..................... 172

Kezelési utasítás....................... 185

Instrucciones de manejo............. 198

Instruções de operação............... 211

ΟδηγίεΟδηγίε

Οδηγίες λς λ

ς λς λ

ς λειτειτ

ειτειτ

ειτοο

οο

ουρυρ

υρυρ

υργίαγία

γίαγία

γίαςς

ςς

ς......................................

......................................

................... 2222

2222

2244

Ýþletme kýlavuzu..................... 237

Contents

Explanation of symbols

1 Important safety

instructions

2 Description

3 Before starting the cleaner

4 Control/Operation

5 Applications and cleaning

techniques

6 After cleaning

7 Maintenance

8 Troubleshooting

9 Further information

..............................................................................................17

2.1 Purpose of the machine ........................................................19

2.2 Product liability ......................................................................19

2.3 Operatingelements ...............................................................19

3.1 Assembly...............................................................................20

3.2 Transport ...............................................................................20

4.1 Electrical connections............................................................21

4.2 Using accessories .................................................................21

4.3 Manoeuvring the cleaner .......................................................22

4.4 Supervising cleaning .............................................................22

5.1 Cleaningtechniques ..............................................................23

5.2 Typical applications................................................................24

6.1 Putting the shaft upright.........................................................25

6.2 Removing accessories ..........................................................25

6.3 Rolling up the power cord ......................................................25

6.4 Storage..................................................................................25

7.1 Maintenanceplan ..................................................................26

7.2 Maintenance work .................................................................26

..............................................................................................26

9.1 Recycling the cleaner ............................................................27

9.2 Guarantee .............................................................................27

9.3 Accessories...........................................................................27

9.4 Technical data .......................................................................28

9.5 EC conformity declaration .....................................................28

1 Important safety instructions

Explanation of symbols Safety instructions marked with

this symbol in these operating

instructions must be observed

to prevent danger to persons.

This symbol is used to mark

safety instructions that must be

observed to prevent damage to

the cleaner and its

performance.

This indicates tips and

instructions to simplify work and

to ensure safe operation.

These safety instructions are

intended for users.

Before assembly, start-up and

maintenance of the cleaner

please read the information and

recommendations in these

operating instructions. This

ensures that you are well

acquainted with the cleaner and

can use it efficiently.

Care and maintenance of the

cleaner in accordance with

these instructions increases

your safety and retains the

value of the cleaner.

The manufacturer accepts no

liability for personal or material

damage caused by improper

handling of the cleaner.

Before starting up the cleaner,

read these operating

instructions thoroughly and

keep them in an easily

accessible place.

Only allow the cleaner to be

used by persons who have

been trained in its use and who

have been explicitly authorized

to use it.

Workplace

The workplace is behind the

cleaner.

General

Use of the cleaner is subject to

current national regulations.

Besides the operating

instructions and binding

accident prevention regulations

valid in the country of use,

observe recognized regulations

for safe and proper work.

Never use unsafe cleaning

techniques.

Do not use the cleaner on

public paths and roads.

Electrical connections

CAUTION!

Never push the cleaner over

power cords.Danger of

electrocution!

Do not damage the power cord

by riding over it, crushing or

pulling it, etc.

Check the power cord regularly

to detect signs of damage.

Do not use the cleaner if the

condition of the power cord is

poor.

When using or replacing power

cords, do not use any other

cords than those specified by

the manufacturer.

When replacing couplings or

power cords, ensure that splash

water protection and

mechanical strength are

adequate.

Do not start the cleaner unless

the power supply in the building

to be cleaned complies with the

specifications on the rating plate

of the cleaner.

Risks

CAUTION!

The cleaner is not suitable to

clean surfaces that release

hazardous dust and liquids.Do

not use on steps.

Inclines

This cleaner is designed for use

on level surfaces with a

maximum incline of 2% only.

Stationary cleaner

When the cleaner is stationary,

switch off the brush unit

immediately to prevent damage

to the floor covering.

Cleaning agents

Only use cleaning agents

approved by Alto.

Maintenance

Service and repair work should

be carried out by persons with

technical and legal authorization

only.

When cleaning and servicing

the cleaner, replacing parts or

changing mode of operation,

switch off the cleaner and

unplug it.

2 Description

2.1 Purpose of the machine All single-disc cleaners are

designed to clean and care for

floor coverings inside buildings

only.

Any other use is considered as

improper use. The manufacturer

accepts no liability for any

damage resulting from such

use. The risk for such use is

borne solely by the user.

The cleaners are suitable for

commercial use, e.g. in hotels,

schools, hospitals, etc.

Proper use also includes proper

operation, servicing and repairs

as specified by the

manufacturer.

Observe the relevant accident

prevention regulations and any

other generally accepted safety

and working regulations.

The manufacturer accepts no

liability for damage resulting

from any changes made to the

cleaner by the user.

Before using the cleaner, check

whether floor coverings are

suitable for this cleaning

technique. Beware of area

compression in point-elastic

floors, e.g. in gym halls.

The manufacturer accepts no

liability for damage to the

cleaner and the cleaned floor

that is caused by the use of

wrong brushes and cleaning

agents.

1 Shaft adjustment lever

2 Guide handle

3 Switch lock

4 Socket (SPIN 43 HS)

5 Brush motor switch

6 Power cord

7 Power cord hook

8 Shaft adjustment joint

9 Wheels

10 Connector for waste hose

11 Speed switch (SPIN 43 DS)

12 Shaft

2.2 Product liability Please note that the cleaners

may be used for their intended

purpose only. If the cleaners are

not used for their intended

purpose, the user has the sole

Accessories

(not included):

13 Spraymaster

14 Tank lever

15 Tank bracket

16 Liquid tank

17 Waste hose

18 Brush

19 Drive plate for pad

20 Pad

responsibility. The manufacturer

accepts no liability whatsoever.

2.3 Operating elements

3 Before starting the cleaner

3.2 Transport 1. Grasp the handle with both

hands and tip the cleaner

until it stands on the two

wheels.

2. Wheel the cleaner to where

it is needed.

When transporting the cleaner

in elevators, observe current

safety regulations, in particular

with regard to carrying capacity.

When transporting the cleaner

in elevators, place the shaft in

an upright position to prevent it

from catching on elevator shaft

walls.

3.1 Assembly For transport reasons, the

motor head and the shaft are

supplied not assembled.

1. Loosen the hexagon socket

screws (1) in the shaft

adjustment joint (2).

2. Insert the shaft gently as far

as possible into the shaft

adjustmentjoint.

3. Align the handle (3) parallel

to the wheels (4) so that the

open side of the shaft upper

housing faces the rear (5).

4. Retighten the hexagon

socket screws in the shaft

adjustmentjoint.

5. Wind the power cord around

the handle and the power

cord hook (6).

4 Control/Operation

4.1 Electrical connections CAUTION!

Connect the cleaner to a proper

electrical installation only.

Follow safety instructions in

Chapter 1.

1. Plug the cleaner into a

socket.

1. Place the accessory (brush

or drive plate with pad) on

the floor.

2. Tip the cleaner on to its

wheels and push it over

accessory until the drive star

and the brush flange are

vertically aligned.

3. Lower the cleaner on to the

accessory.

4. Pull the shaft adjustment

lever (1) and lower the shaft

into its cleaning position.

NOTE!

Extend both arms loosely

downwards (2).Always guide

the cleaner with both hands on

the handle (3).

5. Align the cleaner horizontally

on the accessory.

NOTE!

When using the SPIN 43 DS,

use low speed to fit the

accessory.

6. Press the switch lock (4) and

briefly press the brush motor

switch (5).The brush motor

runs and the accessory

automaticallyengages.

4.2 Using accessories

4.3 Manoeuvring the

cleaner

1. Pull the shaft adjustment

lever (1) and lower the shaft

into its cleaning position.

NOTE!

Extend both arms loosely

downwards (2).

Always guide the cleaner with

both hands on the handle (3).

2. Switch on the motor:

Press the switch lock (4)

and operate the brush motor

switch (5) (right and left).

3. Switch off the motor:

Release the brush motor

switch (5).

When the brush motor is

running:

4. Raise the shaft slightly and

the cleaner moves to the

right.

5. Lower the shaft and the

cleaner moves to the left.

6. Keep the shaft in the centre

and the cleaner cleans on

the spot.

4.4 Supervising cleaning If foam or liquid emerges from

the fresh water tank, switch off

the cleaner immediately.

5 Applications and cleaning

techniques

Floors can be effectively

cleaned by following a few rules

in combination with your

experience in special areas.

5.1.1 Thorough cleaning Attached dirt and/or worn

protective films or other

residues that impair the

appearance of the surface are

removed.

Generally, thorough cleaning is

only necessary at long intervals.

5.1.3 Shampooing Cleaning of carpets with

brushes using a suitable

shampoo solution followed by

removal of the dirty foam by

vacuum action.

If used correctly, accessories

and cleaning agents can

enhance the cleaning effect.A

few basic rules are stated

below.

Aim/results:

The surface has

• no attached dirt

• no worn protective films

• no other residues

The surface has

• no smears or spots

Aim/results:

The surface has

• no attached dirt that

penetrates into the pile

• no superficial dust or fluff

5.1 Cleaning techniques

5.1.2 Routine cleaning Routine cleaning means

cleaning work at defined

intervals.

Aim/results:

Different aim/results depending

on the cleaning work

concerned.

5.1.4 Spraying A hand spray can or a spraying

attachment on a floor cleaner is

used to distribute the cleaning

agent on to areas on the floor

where there are stubborn stains

and worn protective films.These

areas are then polished by the

cleaner using suitable cleaner

pads.

Aim/results:

The surface has

• no stubborn stains, rubber

heel marks, scratches or

drag marks

Areas with worn protective films

are treated and made to match

the surrounding surface.The

appearance (polish) is uniform.

5.1.5 Polishing Mechanical action with pads on

floor coverings treated with care

agents.

Special polish effects

depending on the type of care

agent used.

Aim/results:

The surface has

• no signs of use, heel marks,

drink stains

The appearance of the care film

is uniform.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Alto Machine de plancher

Alto

Alto ENCORE R Manuel utilisateur

Alto

Alto MPV-60 Manuel d'installation et d'exploitation

Alto

Alto 3366 Manuel utilisateur

Alto

Alto FM-1500HD Manuel utilisateur

Alto

Alto Clarke Vision 17E Manuel utilisateur

Alto

Alto ALTO 1700HD Guide de démarrage rapide

Alto

Alto ENCORE R Manuel utilisateur

Alto

Alto Vision V- 00590A Manuel utilisateur

Alto

Alto 3366XP Manuel d'installation et d'exploitation

Alto

Alto FLOORTEC R 570 P Manuel utilisateur

Alto

Alto Vision 17E Manuel d'utilisation et d'entretien

Alto

Alto ENCORE S2426 Manuel utilisateur

Alto

Alto American-Lincoln 6150 Manuel d'installation et d'exploitation

Alto

Alto L-20 Guide de démarrage rapide

Alto

Alto FLOORTEC R 570 B Manuel utilisateur

Alto

Alto 1700 Manuel utilisateur

Alto

Alto AMX-220MKII Manuel utilisateur

Alto

Alto FLOORTEC 380M Manuel utilisateur

Alto

Alto ENCORE S2426 Manuel utilisateur

Alto

Alto Vision 21i Manuel utilisateur

Alto

Alto ATS 46 Manuel utilisateur

Alto

Alto IMAGE 26B Manuel utilisateur

Alto

Alto Clarke IMAGE 14 Manuel utilisateur

Alto

Alto 120V Manuel utilisateur

Manuels Machine de plancher populaires d'autres marques

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuel utilisateur

Numatic

Numatic ET 4045 Manuel utilisateur

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuel utilisateur

Mytee

Mytee 8070 Mytee-Lite Manuel utilisateur

Kärcher

Kärcher B 140 R Manuel utilisateur

Triple S

Triple S Ace 26T1 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuel utilisateur

Tornado

Tornado Marathon 2000 98190 Manuel

Windsor

Windsor ADMIRAL Admiral 8 Manuel utilisateur

Numatic

Numatic TTB 1117/100 Manuel utilisateur

Tennant

Tennant 8210D Manuel utilisateur

Nobles

Nobles Frontier Manuel du produit

lavina

lavina 21-X Manuel utilisateur

KENT

KENT Edge 28B Manuel utilisateur

Tennant

Tennant 215 Manuel du produit

Windsor

Windsor BDP 51/2000C Manuel utilisateur

CleanFreak

CleanFreak DURA-18HD Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guide de l'administrateur