Alpine PXA-H800 Manuel utilisateur

Cautions for Safe Repair Work>

The following cautions will prevent accidents in the workplace and will ensure safe products.

*The symbols indicate caution is needed to prevent injuries and damage to property.

The symbols and their meanings follow.

If you ignore this symbol and handle the product incorrectly or unsafely,

serious injury or death may result.

If you ignore this symbol and handle the product incorrectly or unsafely,

injury or only material damage may result.

*The following symbols indicate two levels of cautions.

When you see this symbol, you have to be very careful.

When you see this symbol, you have to follow the instructions there.

Do not look squarely into the laser light

Fuse Caution

coming from the pickup.

Always use a designated fuse.

You may loose you sight.

Use of an incorrect fuse may result in a fire.

Do not allow wiring to be caught in the

Battery Caution

screw/chassis.

Use the designated battery.

If wiring is caught in the screw/chassis, it may Confirm the correct polarity and seat of the

cause a short circuit, resulting in a fire.

battery.

An incorrect battery or an improperly connected

or seated battery may result in a fire.

High Temperature Caution

Designated Parts Caution

Touching the heat sink may cause severe burns. Look up the part list and ensure that only

designated parts are used to prevent problems or

accidents.

Reverse Power Supply Connections or

Wiring Caution

Misconnections Caution

Ensure that the wiring is correct when rewiring to

Reverse power supply connections or

prevent problems with ignition/breakdown.

misconnections may cause ignition problems and

smoke may result.

Soldering Caution

Wear Gloves

Hot solder from solder splash may cause severe Wear gloves to prevent electrical shocks or injury

burns.

from the end face of the metal.

Warning

Caution

Warning

Caution

X4 X2

Packing Method View

114113112

111

110

109

108

107106

105

104

103

102

101

101 01E42376S01 CONN,ASSY 8P

102 01E42377S01 ASSY,KIT WIRE 8P

103 01E42378S01 ASSY,CABLE

104 01E42379S01 ASSY,CABLE 2P

105 01E42380S01 MIC,LYS-M9750

106 99E42459S01 CD-ROM,Sound Manager

107 99E42460S01 CD-ROM,SETUP(Audio)

108 07E42416S01 BKT,MOUNT

109 75E26094S01 TAPE,PAD-MAGIC

110 03E42381S01 SCR,M3X6(B)(BLK)

111 03E42382S01 SCR,M4X14(HW)(BLK)

#1 112 68-13530Z65 O/M H800 AOAM(Eng,Fra,Esp)

$1 112 68-13530Z67 O/M H800 AOEU(Eng,Fra,Esp)

%1 112 68-13530Z70 O/M H800 AOAP

#1 113 68-13530Z66 I/M H800 AOAM

$1 113 68-13530Z69 I/M H800 AOEU

%1 113 68-13530Z71 I/M H800 AOAP

$1 114 68-13530Z68 O/M H800 AOEU(It,Ger,Sv)

Mark Model Code

#1 PXA-H800(North American) Only,

$1 PXA-H800(European) Only,

%1 PXA-H800(General Foreign) Only,

Others:Common.

NOTE:The part that has not PART NUMBER will not be supplied.

#####

ALPINE PXA-H800_EN 68-13530Z66-A (B5)

System Example

Connecting an automobile factory system (standard audio, etc.) and External Amplifier

Input Pattern: 4ch&2ch Input

AUX INPUT

CH-1 (L) CH-2 (R) CH-3 (L) CH-4 (R) CH-5 (L) CH-6 (R)

AUX1 AUX2

(Front Left)

(Front Right)

(Rear Left)

(Rear Right)

(Left)

(Right)

Commander cable

(RUX-C800 included)

RUX-C800 (Sold separately)*1

Audio output jacks

To External Amplifier

(see page 10) External Amplifier

Rear speaker (L) output lead

Rear speaker (R) output lead

Front speaker (L) output lead

Front speaker (R) output lead

Rear speaker (L)

Rear speaker (R)

Front speaker (L)

Front speaker (R)

Computer connection

terminal

*1When using a factory car audio system, the RUX-C800 Commander (sold separately) is required.

*2If your factory system does not have a Remote Turn-On Lead, connect a cable that enables an incoming power supply (accessory power) in

the ACC position.

*3If using the Speaker-RCA Conversion cable, up to 6 channels can be input. Make connections according to your system.

*4Before using the Speaker-RCA Conversion cable, remove the cord tip coating, cut the cord into 2 cables, connect the cable with commercially

available bullet or solderness terminals attached to the tips.

*5When connecting a speaker input cable, connect via a solderless terminal or solderless connector after disconnecting the automobile’s speaker

cable.

Automobile speaker cable

CAUTION

Make sure to disconnect the factory speakers and the speaker output cable for the factory system.

When using fiber cable, follow the guidelines below:

When laying or bundling optic fiber cables, the minimum bending radius should be 30 mm. Bending beyond the radius will break the cable, resulting in no

digital sound being output.

Do not put the product or other items on the optic fiber cable.

•

White

(1) PXA-H800 (North American) Only

System Connection

ALPINE PXA-H800_EN 68-13530Z66-A (B5)

(L)

(R)

er) in

ercially

speaker

n no

White Red

WhiteRed

WhiteRed Guide Control Lead

White/Green

Navigation audio input connector

Illumination Lead

Orange

Remote Control Output Lead

Blue/White

Remote On Lead

Blue/White

Ground Lead

Black

Not Connected

To Remote On Lead of an

External Amplifier

Connect to a metal part of

chassis body with a screw.

Battery Lead

Yellow

Fuse 10A

12V

Speaker-RCA Conversion cable

Black/White

Black

Black/White

Black

Black/White

Black

Black/White

Black

Rear speaker (L) output lead

Rear speaker (R) output lead

Front speaker (L) output lead

Front speaker (R) output lead

Standard Car

Audio System

RCA extension cable

(Sold separately) TV Tuner or Video

Player, etc.

Red

White

Red

White

Red

White

Red

White

Red

White

Red

White

Ai-NET/RCA Interface

cable KCA-121B

(Sold separately)

Ai-NET/RCA Interface

cable KCA-121B

(Sold separately) RCA extension cable

(Sold separately) TV Tuner or Video

Player, etc.

Fiber optic cable

(Sold separately)

Fiber optic cable

(Sold separately)

To Digital Output

Terminal

To Digital Output

Terminal

Optical Digital Compatible

DVD Player, etc.

Optical Digital Compatible

DVD Player, etc.

Illumination Lead

(Orange)

Red

White

RCA extension cable

(Sold separately)

TV Tuner or Video Player, etc.

*4*5

ALPINE PXA-H800_EN 68-13530Z66-A (B5)

Connecting a Non Ai-NET AV Head Unit, External Input and External Amplifier

Input Pattern : 5.1ch Input

AUX INPUT

CH-1 (L) CH-2 (R) CH-3 (L) CH-4 (R) CH-5 (L) CH-6 (R)

AUX1

(Front Left)

(Front Right)

(Rear Left)

(Rear Right)

(Center)

SubW

(Subwoofer)

Guide Control Lead

Navigation audio input connector

Remote Control Output Lead

Ground Lead

White/Green

Blue/White

Black

Not Connected

To Remote On Lead of an

External Amplifier

Connect to a metal part of

chassis body with a screw.

Battery Lead

Yellow

Fuse 10A

12V

Illumination Lead

Orange

Remote On Lead

Blue/White

RCA extension cable (Sold separately)

Rear Output *2

Front Output *2

Non Ai-NET AV Head

Unit (Sold separately)

Illumination Lead

Orange

Remote On Lead

Blue/White

RCA extension cable

(Sold separately) TV Tuner or Video

Player, etc.

Audio output jacks

To External Amplifier (see page 10)

Center Speaker Output

Subwoofer OutputRCA extension cable (Sold separately)

Red

White

Red

White

Red

White

Red

White

Red

White

Red

White

Red

White

Red

White

Ai-NET/RCA Interface

cable KCA-121B

(Sold separately)

Ai-NET/RCA Interface

cable KCA-121B

(Sold separately) RCA extension cable

(Sold separately) TV Tuner or Video

Player, etc.

Fiber optic cable

(Sold separately)

Fiber optic cable

(Sold separately)

To Digital Output

Terminal

To Digital Output

Terminal

Optical Digital Compatible

DVD Player, etc.

Optical Digital Compatible

DVD Player, etc.

White Red

WhiteRed

Computer

connection

terminal

Commander cable

(RUX-C800 included) RUX-C800 (Sold separately)

RCA extension cable (Sold separately)

*1When using a head unit that is not Ai-NET compatible, the RUX-C800 Commander (sold separately) is required.

CAUTION

When using fiber cable, follow the guidelines below:

When laying or bundling optic fiber cables, the minimum bending radius should be 30 mm. Bending beyond the radius will break the cable, resulting in no

digital sound being output.

Do not put the product or other items on the optic fiber cable.

•

Conn

Inp

White

When u

When

digita

Do no

•

ALPINE PXA-H800_EN 68-13530Z66-A (B5)

Head

rately)

deo

rately)

n no

Connecting a Non Ai-NET Head Unit, External Input and External Amplifier

Input Pattern : 2ch×3 Input

AUX INPUT

CH-1 (L) CH-2 (R) CH-3 (L) CH-4 (R) CH-5 (L) CH-6 (R)

AUX1 AUX2 AUX3

L (Left) R (Right) L (Left) R (Right) L (Left) R (Right)

RCA extension cable

(Sold separately) TV Tuner or Video

Player, etc.

Audio output jacks

Ai-NET/RCA Interface

cable KCA-121B

(Sold separately)

Ai-NET/RCA Interface

cable KCA-121B

(Sold separately) RCA extension cable

(Sold separately) TV Tuner or Video

Player, etc.

Fiber optic cable

(Sold separately)*2

Fiber optic cable

(Sold separately)*2

To Digital Output

Terminal

To Digital Output

Terminal

Optical Digital Compatible

DVD Player, etc.

Optical Digital Compatible

DVD Player, etc.

White Red

WhiteRed

Computer

connection

terminal

Commander cable

(RUX-C800 included) RUX-C800 (Sold separately)

RCA extension cable (Sold separately)

Non Ai-NET Head Unit

(Sold separately)

TV Tuner or Video

Player, etc.

RCA extension cable

(Sold separately) Red

White

Red

White

Red

White

Red

White

Red

White

Red

White

TV Tuner or Video

Player, etc.

Guide Control Lead

White/Green

Remote On Lead

Blue/White

Navigation audio input connector Not Connected

Illumination Lead

Orange

Remote Control Output Lead

Blue/White To Remote On Lead of an

External Amplifier

Ground Lead

Black Connect to a metal part of

chassis body with a screw.

Battery Lead

Yellow

Fuse 10A

12V

To External Amplifier

(see page 10)

Illumination Lead

Orange

Remote On Lead

Blue/White

Red

White

Red

White

Red

White

Red

White

Red

White

Red

White

*1When using a head unit that is not Ai-NET compatible, the RUX-C800 Commander (sold separately) is required.

*2Use when connected with an Optical Digital compatible Unit.

CAUTION

When using fiber cable, follow the guidelines below:

When laying or bundling optic fiber cables, the minimum bending radius should be 30 mm. Bending beyond the radius will break the cable, resulting in no

digital sound being output.

Do not put the product or other items on the optic fiber cable.

•

ALPINE PXA-H800_EN 68-13530Z66-A (B5)

Connecting an Ai-NET compatible AV Head Unit (INA-W910), ALPINE Navigation System, Ai-NET

compatible Changer and External Amplifier

Fiber optic cable (Sold separately) *2

To Digital Output

Terminal (Optical)

To Ai-NET Output

Terminal

Ai-NET compatible

Changer *4, *5

Remote On Lead

Blue/White

To External Amplifier

(see page 10)

Guide Control Lead

White/Green

Not Connected

Guide Control

Lead

White/Green

Navigation audio

input connector

Remote Control

Output Lead

Blue/White

Ground Lead

Black

To Remote On Lead of

an External Amplifier

Connect to a metal

part of chassis body

with a screw.

Battery Lead

Yellow

Fuse 10A

12V

Illumination Lead*1

Orange

Fiber optic cable (Sold separately)

Illumination

Lead*1

Orange

Ai-NET extension cable*7

KCE-900E (Sold

separately)

Guide

Signal I/F

for External

Navigation

To GUIDE Output

Terminal To RGB

Output

Terminal

RGB Cable

To RGB

Output

Terminal

ALPINE

Navigation

System (Sold

separately)

To RGB Input Terminal

(KCE-900E included)

To RGB Input Terminal

Ai-NET compatible

AV Head Unit

(INA-W910) (Sold

separately) *3

To Digital

Output Terminal

(Optical) To Ai-NET Output

Terminal

Computer

connection

terminal

RUX-C800 (Sold separately)

Commander cable

(RUX-C800 included)

Audio output jacks

Not Used

Ai-NET extension cable (Changer included)

RCA extension cable

(Sold separately)

Remote Control

Eye (DVD Changer

included) *6

To Remote

Control Eye Jack

*1Use when connected with the RUX-C800 Commander (sold separately).

*2Use when connected with an Optical Digital compatible Changer.

*3Set the system switch to [EQ/DIV] or [EXT AP]. For details, refer to the Owner’s Manual for the product connected.

*4Setting the system switch is required. For details, refer to the Owner’s Manual for the connected changer.

*5If the Ai-NET compatible Changer is a DVD Changer (DHA-S690 Series or DHA-S680 Series), do not connect its Switched Power Lead

(Red).

*6If the Ai-NET compatible Changer is a DVD Changer (DHA-S690 Series or DHA-S680 Series), do not connect the Remote Control Eye in

a system that uses an Ai-NET compatible AV Head Unit. (Connection of the remote input cord (white/brown) is required.) Use the Remote

Control Eye in a system that uses any other manufacturer’s monitor. For details, refer to the connected DVD changer’s instruction manual.

*7If connecting DVA-5210, connect it between the unit and the head unit using an additional Ai-NET extension cable. In this case, also

connect the audio output jacks (L=white/R=red) of DVA-5210 to the AUX INPUT CH-1 (L)/CH-2 (R) jacks of the unit.

When u

When

digita

Do no

•

Autres manuels pour PXA-H800

Table des matières

Autres manuels Alpine Matériel informatique

Alpine

Alpine PXE-X120-10DP Manuel utilisateur

Alpine

Alpine PXA-H800 Manuel utilisateur

Alpine

Alpine PXA-H100 Manuel utilisateur

Alpine

Alpine PXE-H660 Manuel utilisateur

Alpine

Alpine PXA-H600 Manuel utilisateur

Alpine

Alpine PXE-C60-60 Manuel utilisateur

Alpine

Alpine PHA-H600 Manuel utilisateur

Alpine

Alpine Alpine F#1 Status PXI-H990 Manuel utilisateur

Alpine

Alpine PXE-H650 - System Integration Audio... Manuel utilisateur

Alpine

Alpine ERA-G320 Manuel utilisateur

Alpine

Alpine PXA-H100 Manuel utilisateur

Alpine

Alpine MDA-5048 Manuel utilisateur

Alpine

Alpine ERA-G320 Mode d’emploi

Alpine

Alpine PXA-H700 Manuel utilisateur

Alpine

Alpine PXE-R600 Manuel utilisateur

Alpine

Alpine PXE-R500 Manuel utilisateur

Alpine

Alpine PXA-H800 Manuel utilisateur

Alpine

Alpine PXA-H100 Manuel utilisateur

Alpine

Alpine PXA-H510 Manuel utilisateur

Alpine

Alpine PXE-0850X Manuel utilisateur

Alpine

Alpine Alpine F#1 Status PXI-H990 Mode d’emploi

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur