Allied Telesis AT-GS950/16 Manuel utilisateur
613-001505 Rev B
AT-GS950/16
Gigabit Ethernet Smart Switch
How to Start a WEB
Management Session
Copyright ©2011 Allied Telesis, Inc.
All rights reserved. No part of this publication may be reproduced without prior written
permission from Allied Telesis, Inc.
Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorporated.
All other product names, company names, logos or other designations mentioned herein
are trademarks or registered trademarks of their respective owners.
Allied Telesis, Inc. reserves the right to make changes in specifications and other
information contained in this document without prior written notice. The information
provided herein is subject to change without notice. In no event shall Allied Telesis, Inc.
be liable for any incidental, special, indirect, or consequential damages whatsoever,
including but not limited to lost profits, arising out of or related to this manual or the
information contained herein, even if Allied Telesis, Inc. has been advised of, known, or
should have known, the possibility of such damages.
3
How to Start an AT-GS950/16
WEB Management Session
This document contains the procedures to start you Web management
session on the AT-GS950/16 switch. The following topics are discussed:
“Establishing a Remote Connection to the Web Browser Interface” on
page 4
“Web Browser Tools” on page 8
“Configuration of IP Address, Subnet Mask and Gateway Address” on
page 9
“IP Access List Configuration” on page 11
“DHCP Client Configuration” on page 18
“System Management Information” on page 21
“User Name and Password Configuration” on page 23
“User Interface Configuration” on page 26
“System Information Display” on page 28
“Pinging a Remote System” on page 37
“Pinging a Remote System” on page 37
“Returning the AT-S108 Management Software to the Factory Default
Values” on page 43
“Quitting a Web Browser Management Session” on page 44
Note
To permanently save your new settings or any changes to the
configuration file, select Save Configuration to Flash from the main
menu on the left side of the page.
How to Start an AT-GS950/16 WEB Management Session
4
Establishing a Remote Connection to the Web Browser Interface
The AT-GS950/16 switch is shipped with a pre-assigned IP address of
192.168.1.1.
After your initial login, you may want to assign a new IP address to your
switch. To manually assign an IP address to the switch, refer to
“Configuring an IP Address, Subnet Mask and Gateway Address” on
page 10. To configure the switch to obtain its IP configuration from a
DHCP server, refer to “Enabling and Disabling the DHCP Client” on
page 14.
Whether you use the pre-assigned IP address or assign a new one, you
must set your local PC to the same subnet as the switch.
To start a web browser management session, do the following procedure:
1. Start your web browser.
2. In the URL field of the browser, enter 192.168.1.1 which is the default
IP address of the switch. See Figure 1.
Figure 1. Entering a Switch’s IP Address in the URL Field
Switch’s IP Address
How to Start an AT-GS950/16 WEB Management Session
5
The AT-S108 Management Software displays the login dialog box,
shown in Figure 2.
Figure 2. Management Login Dialog Box
3. Enter the AT-S108 management login user name and password.
The default user name is “manager” and the default password is
“friend.”
4. Press OK.
The login name and password are case-sensitive.
The switch Home Page is displayed. See Figure 3 on page 6 for an
example of the AT-S108 Home Page.
To change the user name and password, refer to “Configuring System
Administration Information” on page 19.
How to Start an AT-GS950/16 WEB Management Session
6
Figure 3. AT-S108 Home Page
The main menu appears on the left side and is common for all of the
management pages discussed in this manual. It consists of the following
folders and web pages:
Switch Info.
Front Panel
System
Physical Interface
Bridge
SNMP
Access Control
RMON
Voice VLAN
Security
LLDP
Statistics Chart
Tools
Save Configuration
How to Start an AT-GS950/16 WEB Management Session
7
5. To see the front panel of the switch, select Front Panel from the main
menu on the left side of the page.
The AT-S108 Management software displays the front of the switch.
Ports that have a link to an end node are green. Ports without a link are
grey. The AT-GS950/16 switch front panel page is shown in Figure 4.
Figure 4. AT-GS950/16 Front Panel Page
A web browser management session remains active even if you link to
other sites. You can return to the management web pages anytime as long
as you do not quit the browser.
How to Start an AT-GS950/16 WEB Management Session
8
Web Browser Tools
You can use the web browser tools to move around the management
pages. Selecting Back on your browser’s toolbar returns you to the
previous display. You can also use the browser’s bookmark feature to
save the link to the switch.
How to Start an AT-GS950/16 WEB Management Session
9
Configuration of IP Address, Subnet Mask and Gateway Address
This procedure explains how to change the IP address, subnet mask, and
gateway address of the switch. Before performing the procedure, note the
following:
A gateway address is only required if you want to remotely manage
the device from a management station that is separated from the
switch by a router.
To configure the switch to automatically obtain its IP configuration
from a DHCP server on your network, go to “DHCP Client
Configuration” on page 18.
To change the switch’s IP configuration, perform the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select IP Setup.
The IP Setup Page is displayed. See Figure 5.
Figure 5. IP Setup Page
3. Change the IP configuration parameters by observing or entering new
information in the following fields:
System MAC Address - This parameter displays the MAC
address of the switch. You cannot change this parameter.
System IP Address - Displays the current IP address of the
switch. To change the IP address, enter a new IP address.
When DHCP is enabled, you cannot change this parameter.
System Subnet Mask - Displays the current subnet mask of the
switch. To change the subnet mask, enter a new subnet mask.
When DHCP is enabled, you cannot change this parameter.
How to Start an AT-GS950/16 WEB Management Session
10
System Default Gateway - Displays the default gateway of the
switch. To change the default gateway, enter a new gateway.
When DHCP is enabled, you cannot change this parameter.
DHCP Mode - For information about setting this parameter, refer
to “DHCP Client Configuration” on page 18.
4. Click Apply.
Note
Changing the IP address ends your management session. To
resume managing the device, enter the new IP address of the switch
in the web browser’s URL field, as shown in Figure 1 on page 4.
5. After you log on to the switch with the new IP address, select Save
Configuration to Flash from the main menu on the left side of the
page to save the new IP address to memory.
Caution
If you do not select Save Configuration to Flash, the IP address
will revert to its original setting when you power cycle or reboot the
switch.
Autres manuels pour AT-GS950/16
5
Table des matières
Autres manuels Allied Telesis Routeur réseau
Allied Telesis
Allied Telesis 210 Manuel utilisateur
Allied Telesis
Allied Telesis AT-GS950/24 Manuel utilisateur
Allied Telesis
Allied Telesis AT-8000S Series Manuel utilisateur
Allied Telesis
Allied Telesis AT-AR442S Manuel utilisateur
Allied Telesis
Allied Telesis AT-8000S/24 Manuel utilisateur
Allied Telesis
Allied Telesis AR400 Series Instructions originales
Allied Telesis
Allied Telesis AT-GS900/8 Manuel utilisateur
Allied Telesis
Allied Telesis Formula 8200 Manuel utilisateur
Allied Telesis
Allied Telesis AT-9408LC/SP Series Manuel utilisateur
Allied Telesis
Allied Telesis AT 9748TS/XP AT-9748TS/XP-20... Manuel utilisateur
Allied Telesis
Allied Telesis AT-FS708LE/PoE Manuel utilisateur
Allied Telesis
Allied Telesis SwitchBlade AT-AR440S Manuel utilisateur
Allied Telesis
Allied Telesis AR Router Guide rapide
Allied Telesis
Allied Telesis AT-9724TS Manuel utilisateur
Allied Telesis
Allied Telesis 86222-06 Manuel utilisateur
Allied Telesis
Allied Telesis AT-8000S Series Manuel utilisateur
Allied Telesis
Allied Telesis AT-GS950/8 Manuel utilisateur
Allied Telesis
Allied Telesis AT-8100L/8 Manuel utilisateur
Allied Telesis
Allied Telesis WebSmart AT-FS750/16 Manuel utilisateur
Allied Telesis
Allied Telesis AT-8000S/24 Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité