Allied Telesis AT-AR236E Manuel utilisateur

ADSL ROUTER 236E QUICK START GUIDE 1.0 2

Important:

This Quick Start Guide was written to allow you to complete a

basic setup configuration for the Allied Telesyn AT-AR236E ADSL

router. At which point you should have access to the Internet via

the ISP account that you have already organized.

This router was designed to be compatible with the Telecom and

TelstraClear ADSL networks.

The full product manual can be downloaded from:

http://www.alliedtelesyn.net.nz/Products/adsl1.htm

Latest New Zealand Quick documentation and SW updates can be

downloaded from:

http://www.alliedtelesyn.net.nz/products/adsl1.htm

ADSL ROUTER 236E QUICK START GUIDE 1.0 3

A. Contents

Check that you have received the following items in the AT-AR236E pack.

1. AT-AR236E Router.

2. 240 VAC to 9VDC power adapter.

3. ADSL Phone Cable (BT to RJ11).

4. Ethernet Patch Cable (RJ45 to RJ45).

5. USB Cable.

6. AT-236E Installation Manual and Quick Start Guide.

B. Pre-Installation

Check that the PC you are using to complete this initial setup has a working

Ethernet port and that the IP protocol is installed.

Have your ISP account details available. This is to include the ADSL login and

password information.

Have an ADSL line filter installed onto the incoming telephone line. This can be

done once for the premises in which case there will be an ADSL outlet provide by

the installer. Alternatively, filters can be plugged into all phone outlets on that line

and the phones plugged into the filter. A filter is not required on the phone outlet

that the ADSL router is to use.

C. Connection

Using the Ethernet patch cable connect the PC’s NIC interface to the router’s

Ethernet port, an RJ45 socket. Plug the power pack into a mains outlet and

connect the DC power cable to the 9VDC power socket on the router.

Use the telephone cable to connect the ADSL socket on the router to the ADSL

wall outlet supplied by Telecom or to a non-filtered telephone wall outlet making

sure that all other telephone outlets are now equipped with filters.

Turn on power to the PC and the router.

ADSL ROUTER 236E QUICK START GUIDE 1.0 4

D.Getting Started

The AT-AR236E ADSL router is configured via a web browser preferably

Microsoft’s Internet Explorer 5.0 or later. Remember to disable any proxy settings

on your Internet Browser.

Your PC will require an IP address and the gateway address e.g.

IP address = 192.168.1.2

Subnet Mask = 255.255.255.0

Default Gateway = 192.168.1.1

The default IP address of the AT-AR236E ADSL router is 192.168.1.1. Enter this

address into your browser’s address bar and press enter. You should receive the

Modem Access Screen from the router.

Figure 1. Mode Access Page

The default logon username is admin and password is admin.The username

is already entered for you, type the password admin and click on the “Log In”

button.

The Quick Start page will appear if the login has been successful.

Figure 2. Selecting the Country Page

ADSL ROUTER 236E QUICK START GUIDE 1.0 5

Select the country where this router is to be operated in and click on the “Next”

button (Figure 2).

The default settings for the country you selected are displayed. To continue, click

on the “Next” button (Figure 3). The quick start, Login Settings screen will be

displayed.

Figure 3. Selecting the ADSL Default Setting of New Zealand Page

The ADSL Username and Password supplied by your ISP must be entered into

the User ID and Password fields here. When ready click on the “Connect” button

(Figure 4).

Figure 4. Login Setting Page

If the above information is correct and the ADSL line and its filter are correctly

installed the router will attempt to establish an ADSL connection to your ISP.

ADSL ROUTER 236E QUICK START GUIDE 1.0 6

While this process is underway, a screen stating “Trying to connect to ISP…“will

be displayed.

Once the connection has been successfully completed the, “Connections” screen

will appear. This screen will display the connection name, type, the IP address

allocated to the connection and the status of the connection. This can take about

40 seconds.

Figure 5. Connections Information Page

At this point you should then click on “Save Settings” on the left of the page to

save the configuration

Next, select “setup” from the top row of tabs (Figure 6).

Figure 6. Setup Tab

ADSL ROUTER 236E QUICK START GUIDE 1.0 7

you wish to change HCP Configuration”

Figure 8. DHCP Configuration Page

Figure 7. Initial Setup page.

You now need to decide what IP address range you intend to use and how IP

address allocation is going to be done on your LAN network.

By default, the AT-AR236E is configured for the IP address range 192.168.1.0

with a mask of 255.255.255.0. Also by default, DHCP is on. DHCP is an

automated method of allocating IP addresses to PCs as they boot up.

If either of these settings, click on “D

(

Figure 8

ADSL ROUTER 236E QUICK START GUIDE 1.0 8

It can take up to 10 seconds for all the fields to show their information.

The DHCP Configuration screen allows you to turn DHCP off or on (if you are not

sure, leave DHSP on). Click on Apply once you have completed making changes.

To change the address of the router or the whole address range, click on

“Management IP” (Figure 9).

By changing the IP address and mask of the router here you will need to change

your “Gateway” setting on the LAN devices E.g. PCs or Firewall. The host name

of the router and domain name of the network can also be recorded here. Click

on “Apply” (Figure 9) once you have made any changes.

Now click on Connection 0 (Figure 10), it may take up to 10 seconds before all

the fields are updated with current data.

Figure 10. PPPoA Connection Setup Page

Figure 9. Management IP Page

ADSL ROUTER 236E QUICK START GUIDE 1.0 9

Here we can check the WAN or ADSL settings that have been configured so far.

mall changes can be made here quickly without restarting the whole procedure.

may be useful to change the name of this connection to something more

eaningful or descriptive. Click on “Apply” (Figure 10) once you have completed

aking changes.

ou should then click on “Save Settings” (Figure 10) to save the configuration.

ADSL ROUTER 236E QUICK START GUIDE 1.0

E. elpH

ce relating to warranties, installation and operation.

They will escalate the problem through the appropriate channels.

Always check that the router is installed properly. Check the website for information

and how to troubleshoot the router. If you have difficulties contact your reseller or

distributor for technical assistan

Allied Telesyn New Zealand Distributors are

Connector Systems Ltd

5A Pacific Rse

Mt Wellington Auckland

Free Phone: 0508 Call CSL

Website : http://www.connectorsystems.co.nz

Email : [email protected]

Express Data NZ

Express Data NZ Ltd

Level 12, Microsoft House

3-11 Hunter Street

Wellington

Free Phone: 0800 336 427

Website : http://www.expressdata.co.nz

Email data.co.nz: sales@express

Renaissance Ltd

92 Beachcroft Ave

Onehungha Auckland

Free Phone: 0800 800 905

Website : http://www.renaissance.co.nz

Email : [email protected]

Phone: 04 566 4438 (Mon-Fri, 9am-4pm)

Web : http://www.alliedtelesyn.net.nz

Emai : [email protected]

Knowledge

Base : http://kb.alliedtelesyn.com

Autres manuels pour AT-AR236E

Table des matières

Autres manuels Allied Telesis Routeur réseau

Allied Telesis

Allied Telesis AT-8000GS/48 Manuel utilisateur

Allied Telesis

Allied Telesis AT-8116 Manuel utilisateur

Allied Telesis

Allied Telesis WebSmart AT-FS750/16 Manuel utilisateur

Allied Telesis

Allied Telesis AlliedWare NetScreen Routers Instructions d'installation et d'entretien

Allied Telesis

Allied Telesis AT-AR240E Manuel utilisateur

Allied Telesis

Allied Telesis 210 Manuel utilisateur

Allied Telesis

Allied Telesis AT-9724TS Manuel utilisateur

Allied Telesis

Allied Telesis Routers and Switches Manuel utilisateur

Allied Telesis

Allied Telesis AT-8000S Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-AR236E Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS724L Manuel utilisateur

Allied Telesis

Allied Telesis AT-GS950/16 Manuel utilisateur

Allied Telesis

Allied Telesis AT-AR236E Fiche d'information produit

Allied Telesis

Allied Telesis AT-AR240E Manuel utilisateur

Allied Telesis

Allied Telesis CentreCOM AT-3726XL Instructions d'installation et d'utilisation

Allied Telesis

Allied Telesis AT-9408LC/SP Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS724L Manuel utilisateur

Allied Telesis

Allied Telesis AR415S Guide d'application

Allied Telesis

Allied Telesis AR400 Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-8000S Series Mode d’emploi

Allied Telesis

Allied Telesis AT-GS905 Manuel utilisateur

Allied Telesis

Allied Telesis SwitchBlade AT-AR440S Manuel utilisateur

Allied Telesis

Allied Telesis AT-AR256E Manuel utilisateur

Allied Telesis

Allied Telesis AT-AR442S Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité