Allen-Bradley ArmorBlock Series Manuel

Wiring Diagrams

ArmorBlock Dual-Port EtherNet/IP 8-Point

Digital Modules

Catalog Numbers 1732E-IB8M8SOER, 1732E-OB8M8SR, 1732E-8CFGM8R

Parts List

Your package contains one 1732E ArmorBlock™ module and these pinout guide

wiring instructions.

For complete installation instructions, refer to the Module Publication Number

table and visit http://literature.rockwellautomation.com.

Module Publication Number

1732E ArmorBlock Dual Port EtherNet/IP Digital Modules Installation

Instructions

1732E-IN007

ATTENTION: Two sets of mounting holes are used to mount the module

directly to a panel or machine. Mounting holes accommodate #6 (M3) pan

head screws. The torque specification is 0.68 Nm (6 lb-in.).

ATTENTION: To comply with the CE Low Voltage Directive (LVD), this

equipment and all connected I/O must be powered from a source compliant

with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).

ATTENTION: To comply with UL restrictions, this equipment must be powered

from a source compliant with the following: Limited Voltage.

ATTENTION: The device meets UL Type 1 Enclosure rating.

2ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules

Publication 1732E-WD002C-EN-P - March 2014

I/O Connectors

EtherNet/IP Connector

D-Code M12 Micro Network Female Connector

ATTENTION: Sensors/actuators power should not be supplied externally.

IMPORTANT

Use the 1585D–M4DC–H: Polyamide small body unshielded mating

connectors for the D-Code M12 female network connector.

Note that the distance between the center of each Ethernet connector is

16.2 mm. Rockwell Automation recommends the use of suitable cable

based on this measurement. Some of the recommended cables are

1585D-M4TBJM-x and 1585D-M4TBDM-x for daisychains.

ATTENTION: Make sure all connectors and caps are securely tightened to

properly seal the connections against leaks and maintain IP enclosure type

requirements.

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input

45383

Pico-style 3-Pin Input Female Connector

45383

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Output

Pico-style 3-Pin Output Female Connector

Pico-style 3-Pin Self-configuring Female Connector

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input or Output

45383

(View into connector)

Pin 1 Tx+

Pin 2 Rx+

Pin 3 Tx-

Pin 4 Rx-

Pin 5 Shell

44808

ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules 3

Publication 1732E-WD002C-EN-P - March 2014

Power Connectors

Micro-style 4-Pin Input Male Receptacle

Specifications

IMPORTANT

Use two twisted pair CAT5E UTP or STP cables.

IMPORTANT

The maximum current that any pin on the power connectors can

carry is 4 A.

Environmental Specifications

Attribute Value

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20…60 °C (-4…140 °F)

Temperature, ambient, max 60 °C (140 °F)

Voltage, power, max 30V DC

Voltage, power, min 12V DC

Output current 0.5A per output, up to 4A per module

D-Code

M12 Pin

Wire Color Signal 8-way Modular

RJ45 Pin

1 White-orange TX+ 1

2 White-green RX+ 3

3 Orange TX- 2

4 Green RX- 6

45764

(View into receptacle)

Pin 1 Auxiliary power+

Pin 2 Module power+

Pin 3 Module power-

Pin 4 Auxiliary power-

45763

Male Input Female Output

Publication 1732E-WD002C-EN-P - March 2014 PN-245397

Allen-Bradley, Rockwell Automation, ArmorBlock and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Pilot Duty Rating DC-14

Enclosure type rating Meets IP65/66/67/69K

ATTENTION: This equipment is considered Group 1, Class A industrial equipment

according to IEC/CISPR 11. Without appropriate precautions, there may be difficulties

with electromagnetic compatibility in residential and other environments due to

conducted and radiated disturbance.

Certifications

Certification (when

product is marked)(1)

(1) See the Product Certification link at http://www.rockwellautomation.com/products/certification/ for

Declarations of Conformity, Certificates, and other certification details.

Value

c-UR-us UL Recognized Component Industrial Control Equipment, certified for US

and Canada. See UL File E322657.

CE European Union 2004/108/EC EMC Directive, compliant with:

EN 61326-1; Meas./Control/Lab., Industrial Requirements

EN 61000-6-2; Industrial Immunity

EN 61000-6-4; Industrial Emissions

EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)

C-Tick Australian Radiocommunications Act, compliant with:

AS/NZS CISPR 11; Industrial Emissions

EtherNet/IP ODVA conformance tested to Ethernet/IP specifications.

KC Korean Registration of Broadcasting and Communications Equipment,

compliant with:

Article 58-2 of Radio Waves Act, Clause 3

Environmental Specifications

Attribute Value

Autres manuels pour ArmorBlock Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Allen-Bradley Unité de contrôle

Allen-Bradley

Allen-Bradley POINT I/O 1734-OB2 Manuel utilisateur

Allen-Bradley

Allen-Bradley ControlLogix 1756-IA8D Manuel utilisateur

Allen-Bradley

Allen-Bradley E300 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1771-OBD Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-KT/B Guide d'installation et d'utilisation

Allen-Bradley

Allen-Bradley DeviceNet 1203-GK5 Manuel utilisateur

Allen-Bradley

Allen-Bradley OptiSIS 1711-P05SISID050S Manuel utilisateur

Allen-Bradley

Allen-Bradley CompactLogix EtherNet/IP 1768-EWEB Manuel utilisateur

Allen-Bradley

Allen-Bradley ControlNet 1747-SCNR Manuel utilisateur

Allen-Bradley

Allen-Bradley 1734-OB2 Manuel utilisateur

Allen-Bradley

Allen-Bradley POINT I/O 1734-VHSC5 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1771-OD Guide d'installation et d'utilisation

Allen-Bradley

Allen-Bradley ControlLogix 1756-HYD02 Manuel utilisateur

Allen-Bradley

Allen-Bradley Series B Manuel utilisateur

Allen-Bradley

Allen-Bradley Bulletin 1203 Series Manuel utilisateur

Allen-Bradley

Allen-Bradley ControlLogix ControlNet Scanner Module Manuel de service

Allen-Bradley

Allen-Bradley 1771-QDC Manuel utilisateur

Allen-Bradley

Allen-Bradley 1606-XLBRED20 Manuel utilisateur

Allen-Bradley

Allen-Bradley Compact 1769-OB32 Manuel utilisateur

Allen-Bradley

Allen-Bradley ControlLogix 1756-OX8I Manuel utilisateur

Allen-Bradley

Allen-Bradley ControlLogix 1756-OA8D Manuel utilisateur

Allen-Bradley

Allen-Bradley FLEX I/O 1794-OB8 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1794-IE8H Manuel utilisateur

Allen-Bradley

Allen-Bradley 1336 PLUS II Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur