Alfa Network AIP-610H Manuel utilisateur

Wireless LAN Device Series

High-Power 400mW 802.11b/g Router

AIP-610H

User Manual

Version. 6.1

Preface

This guide is for the networking professional who installs and manages the AIP-W610H

product hereafter referred to as the “device”. To use this guide, you should have

experience working with the TCP/IP configuration and be familiar with the concepts and

terminology of wireless local area networks.

Ch 1. AIP-W610H Pack

Packing List

Before you start to install the AIP-W610H, make sure the package contains the following

items：

User CD

12VDC Power Adapter

2dBi Antenna

AIP

W610H Device

Ch 2. First Time Configuration

Before Start to Configure

There are two ways to configure the device, one is through web-browser, and the other is

through Secure Shell CLI interface. To access the configuration interfaces, make sure you

are using a computer connected to the same network as the device. The default IP address

of the device is 192.168.2.1, and the subnet-mask is 255.255.255.0.

In order to communicate with AIP-W610H, you have to configure the IP addresses of

your computer to be compatible with the device. The router supports DHCP server and it

is disabled as default. Users that configure your IP address as “Use the following IP

address”, check the following IP configuration instruction.

Note:

1. The default network setting of the device:

IP address: 192.168.2.1

Subnet Mask: 255.255.255.0

DHCP Server: disabled

2. In the following TCP/IP configuration guide, the IP address

“192.168.2.2 ” is assumed to be your IP address. You need to specify IP

addresses manually.

Please DO NOT choose 192.168.2.1 for the IP address (192.168.2.1)

has been set as the default IP for this device.

3. The following TCP/IP configuration guide uses windows XP as the

presumed operation system.

Procedures to configure IP addresses for your computer

1. If you are in Classic Start menu view, click Start Settings Control

Panel Network Connections.

If you are in Start menu view, click Start Control Panel Network

Connections.

2. Double click “Local Area Connection”

3. Choose Internet Protocol (TCP/IP) and click Properties.

4. You need to choose “Use the following IP address” to specify IP

addresses manually.

Please click the OK button after your configuration.

The device has three operation modes (Router/Bridge/WISP). In bridge mode, also

known as AP Client, you can access the device by both WLAN (Wireless Local Area

Network) and wired LAN. And in router/WISP modes, the device can be accessed by

both WLAN and LAN. The default IP addresses for the device are 192.168.2.1, so you

need to make sure the IP address of your PC is in the same subnet as the device, such as

192.168.2.X.

Knowing the Network Application

AIP-W610H can act as the following roles

●Gateway

●Bridge

●WISP Client

●Router (WAN Ethernet)

●Router (WAN Wireless)

The device provides 5 different operation modes and the wireless radio of device can act

as Gateway/Bridge/WISP Client/Router/Router. The operation mode is about the

communication mechanism between the wired Ethernet NIC and wireless NIC, the

following is the types of operation mode.

Gateway

The device is supposed to connect to internet via Ethernet port. The NAT is enabled and

PCs in LAN ports share the same IP to ISP through WAN port. The connection type can

be setup in WAN page by using PPPoE, DHCP client, PPTP client or static IP.

Bridge

The wired Ethernet and wireless NIC are bridged together. Once the mode is selected, all

the WAN related functions will be disabled.

WISP(Wireless ISP)

This mode can let you access the AP of your wireless ISP and share the same public IP

address form your ISP to the PCs connecting with the wired Ethernet port of the device.

To use this mode, first you must set the wireless radio to be client mode and connect to

the AP of your ISP then you can configure the WAN IP configuration to meet your ISP

requirement.

The wireless radio of the device acts as the following roles.

Router (WAN Ethernet)

The device is supposed to connect to internet via Ethernet port and it will act as router.

NAT system will be disabled.

Router (WAN Wireless)

The device is supposed to connect to internet via Wireless port and it will act as router.

NAT system will be disabled.

Hereafter are some topologies of network application for your reference.

Basic Settings

Disable Wireless LAN Interface: Disable the wireless interface of device

Band: The device supports 2.4GHz(B), 2.4GHz(G) and 2.4GHz(B+G) mixed modes.

Mode: The radio of device supports different modes as following:

1AP : The radio of device acts as an Access Point to serves all wireless clients to

join a wireless local network.

2Client : Support Infrastructure and Ad-hoc network types to act as a wireless

adapter.

3WDS : Wireless Distribution System, this mode serves as a wireless repeater,

only devices with WDS function supported can connect to it, all the wireless clients can’t

survey and connect the device when the mode is selected.

4AP+WDS : Support both AP and WDS functions, the wireless clients and devices

with WDS function supported can survey and connect to it.

Infrastructure :

This type requires the presence of 802.11b/g Access Point. All communication is done

via the Access Point.

Ad Hoc : This type provides a peer-to-peer communication between wireless

stations. All the communication is done from Client to Client without any Access

Point involved. Ad Hoc networking must use the same SSID and channel for

establishing the wireless connection.

In client mode, the device can’t support the Router mode function including Firewall

and WAN settings.

SSID :

The SSID is a unique identifier that wireless networking devices use to establish and

maintain wireless connectivity. Multiple access point/bridges on a network or

sub-network can use the same SSID. SSIDs are case sensitive and can contain up to 32

alphanumeric characters. Do not include spaces in your SSID.

Table des matières

Autres manuels Alfa Network Routeur réseau

Alfa Network

Alfa Network ADS-R02 Manuel utilisateur

Alfa Network

Alfa Network Data Traveller Manuel utilisateur

Alfa Network

Alfa Network AIP-W610 Manuel utilisateur

Alfa Network

Alfa Network AHPE201 Manuel utilisateur

Alfa Network

Alfa Network MATRIXPRO 2 Manuel utilisateur

Alfa Network

Alfa Network AHPE301 Manuel utilisateur

Alfa Network

Alfa Network AP121U Manuel utilisateur

Alfa Network

Alfa Network AWAP602HW Manuel utilisateur

Alfa Network

Alfa Network AIP-W525H V2 Manuel utilisateur

Alfa Network

Alfa Network R36AH Manuel utilisateur

Alfa Network

Alfa Network AC1200 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité