ALDI FERREX 705715 Manuel utilisateur
Product
Info
705715
65 W MULTIFUNCTIONAL
SHARPENER
Read all safety warnings and all instructions
thoroughly before operating this product.
Ensure you keep your manual in a
safe place for future reference.
IM ed 3; 05/2021
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or aftersales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
Product
Info
* Depending on your tarif you may be charged
for the connection.
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION.
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. The benets conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty details
AFTER SALES SUPPORT
(toll free)
MODEL No.: BDS651 •05/2021 •705715
1
Contents
Pack Contents /Parts 2
Description of Symbols 3
General power tool safety warnings 4
Parts List 8
Operating instructions 10
Mounting to a bench 10
Switching on and o 10
Sharpening HSS drill bits 10
Sharpening knives 12
Sharpening scissors 13
Sharpening chisel & planer blades 13
Maintenance 15
Storage and cleaning 15
Warranty 16
Environmental protection 16
What your 1 year warranty means 17
Troubleshooting 17
Technical data 18
Pack contents / parts
Congratulations on the purchase of your FERREX® 65 W Multifunctional
Sharpener. When you open your packaging, rst remove all items and check
there are no parts damaged or missing. If you nd anything wrong, do not
operate the product until the parts have been replaced or the fault has been
rectied. Failure to do so could result in serious personal injury.
Intended use of the 65 W Multifunctional Sharpener
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial, industrial or trade use.
This multi-task sharpener tool includes three working modules:
1. HSS (High Speed Steel) drill sharpener — Sharpens all high speed steel drill
bits from 3 mm to 13 mm.
2. Knife & Scissor Sharpener — Sharpens all straight edged knives and
scissors.
3. Chisel & Planer Sharpener — Regrinds chisel and planer blades from 6 mm
to 51 mm width.
Use the sharpener and modules only for intended applications.
This user manual contains important information on how to use the 65 W
Multifunctional Sharpener. Read this user manual carefully, in particular
the safety instructions, before using the product. Failure to follow this user
manual may lead to severe injuries or product damage.
Keep this user manual for further reference.
IMPORTANT INFORMATION.
NOTE: First time users or inexperienced operators pay particular attention
to the operation of the 65 W Multifunctional Sharpener, including details of
starting and stopping and correct use of the 65 W Multifunctional Sharpener
on pages 10-13, as well as the maintenance instructions on pages 15.
Contents of carton
2
1 x 65 W Multifunctional Sharpener
3 x Modules Including Drilling,
Sharpening Chisels, Sharpening
Knives And Scissors
1 x Instruction Manual
1 x Warranty Card & Certicate
The instruction manual or rating plate on your product may show symbols.
These represent important information about the product or instructions
on its use.
3
To reduce the risk of injury, user must read instruction
manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Conforms to relevant standards for electrical safety and
electromagnetic compatibility.
12 12 Months Warranty Period.
Box
The box is recyclable at kerbside.
The Insert is recyclable at kerbside.
Description of symbols
General Safety Instructions
4
WARNING! Read all safety warnings, instructions, illustrations
and specications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, re and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an extension cord
5
suitable for outdoor use. Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the o-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your nger on
the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair and clothing away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action
can cause severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
6
b) Do not use the power tool if the switch does not turn it on and o.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and/or remove the
battery pack, if detachable, from the power tool before making
any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may aect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations dierent from
those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualied repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
6) Recommendation
Recommendation that the tool always be used with a residual current
device having a rated residual current of 30 mA or less.
7
Bench grinder safety warnings
a) Do not use a damaged accessory. Before each use, inspect the
accessory such as abrasive wheels for chips and cracks. After
inspecting and installing an accessory, position yourself and
bystanders away from the plane of the rotating accessory and run
the power tool at maximum no-load speed for one minute. Damaged
accessories will normally break apart during this test time.
b) The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running faster
than their rated speed can break and y apart.
c) Never grind on the sides of a grinding wheel. Grinding on the side can
cause the wheel to break and y apart.
Table des matières
Autres manuels ALDI Outils électriques
