ALDI FERREX 300W Fiche d'information produit
A
34
4
1
2
3GB IRE
6
74
12
4
13
4
14
4
15
4
8
4
9
4
10
4
11
5
4
GB IRE
GF
ED
CB
IH
Scope of delivery/device components
Securing clip
Tension lever
ON / OFF switch
Vibration rate preselection
Thread for additional handle
Tool holder
HCS plunge-cut saw blade (32 mm)
Segment saw blade (85 mm)
Sanding plate
Scraper (50 mm)
Sanding sheets
Additional handle
HSS plunge-cut saw blade (32 mm)
Extraction channel
Extraction adapter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
300W multifunctional tool
6
GB IRE
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB +44 (0) 1904 727501 +353 (0) 19022605
General information
Reading and storing the user manual
This user manual accompanies this 300W multifunctional tool. It contains
important information on start-up and handling.
For improved readability, the 300W multifunctional tool will be referred to
only as the “multifunctional tool” below.
Before using the multifunctional tool, read the user manual carefully. This particularly
applies to the safety notes. Failure to heed this user manual may result in severe
injury or damage to the multifunctional tool.
The user manual is based on the standards and rules in force in the European Union.
When abroad, you must also observe country-specific guidelines and laws.
Store the user manual for future use. Make sure to include this user manual when
passing the multifunctional tool on to third parties.
Proper use
The multifunctional tool is only designed for private users in connection with hobby
and DIY projects for the following purposes:
• sawing, cutting, scraping and sanding various materials in hard-to-reach
areas.
Any other applications are expressly prohibited and are deemed improper use.
Neither the manufacturer nor the retailer can accept any responsibility for injury,
loss or damage caused by misuse of this product of any kind. Examples of misuse are
given in the following non-exhaustive list:
• Using the multifunctional tool for other than the intended purposes;
• Failure to observe the safety instructions and warnings as well as the
assembly, operating, maintenance and cleaning instructions contained in
this user manual;
• Failure to comply with any regulations relating to accident prevention,
occupational medicine or safety, which specifically and/or generally apply to
the use of this multifunctional tool;
• Use of accessories and spare parts not intended for the multifunctional tool;
• Modifications to the multifunctional tool;
• Repairs of the multifunctional tool performed by parties other than the
manufacturer or a qualified professional;
• Use of the multifunctional tool for commercial or industrial applications as
well as in connection with the trades;
General information
300W multifunctional tool
7
GB IRE
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB +44 (0) 1904 727501 +353 (0) 19022605
• Operation or maintenance of the multifunctional tool by persons not familiar
with how to handle the multifunctional tool and/or who are not aware of the
related risks.
Residual risks
Despite proper use, inconspicuous residual risks cannot be completely ruled out. The
following risks may arise due to the nature of the multifunctional tool:
• Projection of parts or breakage of the sanding surface, the fitted tool or the
material being processed pose a risk of severe injury or blindness if the
prescribed protective goggles are not worn,
• Contact with sharp or hot parts of the work piece or the fitted tool during
operation or while performing maintenance,
• Damage to hearing if the prescribed hearing protection is not worn,
• Inhalation of particles produced whilst sanding the material as well as the
surface being sanded or polished.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
multifunctional tool or on the packaging.
This signal symbol/word designates a hazard
with moderate risk, which may result in death or
severe injury if not avoided.
This signal symbol/word designates a hazard
with low risk that, if not avoided, may result in
minor or moderate injury.
This signal word warns against potential
damages to property.
Declaration of conformity (see chapter “Declaration of conformity”):
Products marked with this symbol meet all applicable Community
regulations for the European Economic Area.
A product placed on the United Kingdom market meets the UKCA Marking
requirements
Safety
WARNING!
CAUTION!
NOTICE!
300W multifunctional tool
8
GB IRE
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB +44 (0) 1904 727501 +353 (0) 19022605
Wear protective goggles.
Wear a dust mask.
Wear ear protection.
Wear suitable protective gloves.
Read the user manual!
The multifunctional tool complies with protection class II.
Safety
General power tool safety instructions
WARNING Read all safety instructions and instructions.
Failure to follow the safety instructions and instructions may result in an electric
shock, fire and/or severe injury.
Save all warnings and instructions for future reference
The term “power tool” used in the safety instructions refers to mains-operated power
tools (with a power cable) and battery-powered power tools (cordless).
Work area safety
a) Keep your work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Safety
300W multifunctional tool
9
GB IRE
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB +44 (0) 1904 727501 +353 (0) 19022605
Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces the
risk of electric shock.
Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
Safety
300W multifunctional tool
10
GB IRE
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB +44 (0) 1904 727501 +353 (0) 19022605
clothing and gloves away from moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/or remove the battery
pack, if detachable, from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may
affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and fitted tools etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
Safety
Table des matières
Autres manuels ALDI Outils électriques
