Akai ABTS-70 Manuel utilisateur

ABTS-70

Portable Bluetooth speaker

EN-ENGLISH

USER MANUAL

EN - ENGLISH

Features:

•Portable LED lights Party Speaker

•AWS function

•IPX5 water-resistant

•Extremely deep bass with powerful EQ

•Support USB play and TF card play

•POWER-BANK function to charge mobile devices

•Bluetooth action range 10 meters

•Built-in lithium rechargeable battery 7.4V /3000mAh.

•Playtime up to 7 hours at 50% volume.

Technical Specifications:

•Power source: 5V 1A

•Power Consumption: 5W

•RMS Power: 40W

•Bluetooth version: 5.0

•Bluetooth channel emission power: 2dbm

•Bluetooth Frequency: 2.400-2.483GHz

•Bluetooth action range: 10 meters

•Battery type and voltage: 7.4V/3000mAh lithium ion

•Frequency Response: 20Hz~20Khz

•Driver size: 3inch*2+passive radiators

•Product dimensions: 291(L) *126(d)* 110(h)mm

Package Content:

•ABTS-70 Portable Speaker

•USB Charging Cable

•Unit Manual

EN - ENGLISH

Product details:

1. AWS pair ON/OFF button

2. AWS function indicator

3. LED mode button

4. Play/Pause | Hold to disconnect Bluetooth.

5. Single press for volume down | Hold for previous track

6. Single press for volume up | Hold for next track

7. Hold for Power ON/OFF

8. LED indicator

•Bluetooth searching: Rapid flash WHITE

•Bluetooth successful pairing: Slow flash WHITE

•Line in mode –Solid WHITE

•USB playing –Solid WHITE

•Micro SD card playing –Flash RED

Back Of Speaker details:

Line in/3.5mm audio port

2. Micro SD port

3. Micro USB charge port (5V / 1000mA)

4. USB Play and power bank feature (5V /

1000mA)

5. Charge LED indicator

Red LED indicates the unit is charging and not full

Red LED will turn off when fully charged

EN - ENGLISH

LED Mode Selection:

•Press button to cycle through different LED modes

•

Hold

button to turn off top and bottom light

•

Hold

button to turn off center light

•

Double press

button to turn on/off side flashing lights

Charging:

1. Use the included USB Charging cable and plug the Micro USB end into the DC 5V port located

at the back of the unit. Plug the other end into a USB powered port.

The battery is fully charged in 6.5 hours. (Charging time will be longer if speaker is being

used during charging}

3. The red LED light indicates that the unit is charging. The red LED will turn off when the battery

is fully charged. The charging cable can then be disconnected.

Auxiliary Play Mode:

Hold the button to turn on the speaker

2. Connect an audio cable (not supplied) to the 3.5mm audio port at the back of the speaker

3. Connect the other end of the audio cable to the audio source.

Speaker will go to auxiliary mode automatically (LED will glow solid white}

Bluetooth Play Mode:

1. When using a Bluetooth enabled audio device, make sure the distance to the speaker is within

10m. Certain environments may affect the working distance.

2. Press and hold the button to turn on the speaker. Theunit will give a beeping sound to indicate

it is in Bluetooth mode. The LED will rapidly flash white.

3. Activate Bluetooth on your audio device.

4. Search for new device "ABTS-70” then connect it. No password will be required.

5. Adjust the volume on your audio device to the desired level.

Note: The speaker will automatically power off after 30 mins if is not in use or music not being

played.

EN - ENGLISH

USB Play Mode:

1. Hold the button to turn on the speaker.

2. Plug your USB/flash drive into the USB-A port on the speaker.

3. Short press button to activate the USB play mode.

4. The unit will enter USB play mode automatically.

Micro SD / TF Card Play Mode:

1. Hold the button to turn on the speaker.

2. Insert the Micro SD card into the SD slot on the speaker.

3. Short press button to activate the SD/TF Card play mode.

4. The unit will enter Micro SD play mode automatically.

AWS {AKAI Wireless Stereo} Connection

Two speakers can be synchronized and connected.

1. Hold the button on each speaker to turn both speakers on.

2. Press and hold the on both speakers to enter AWS mode.

3. You will hear a beep when the two speakers are paired (I0 sec.)

The LED on the master speaker will be solid white, while the LED

5. on the second speaker will flash white.

6. On your audio device, turn Bluetooth on and follow normal Bluetooth pairing instructions.

EN - ENGLISH

Note: Once speakers have been paired via AWS, they will pair again each time they are turned

on. If you want to unpair them, press the to disconnect. The speaker will beep and both

LEDs will flash indicating the speakers are no longer paired.

Troubleshooting

Power Bank Mode:

1. Use a charging cable that is compatible with your mobile device, making sure it has a USB-

A connector on the other end.

Once you have connected your mobile device to the speaker’s USB-A output,the charge

port can provide 5V/1000mAh output.

If your device tries to draw more current than the speaker can output, the speaker will shut off

the USB port for your safety.

The speaker will not charge the mobile device if the power is off.

Issue

Possible solution

No power

•Make sure your speaker is turned on and

charged.

No sound

•Make sure the volume of your speaker is not at

the lowest setting.

Make sure the connected audio device is playing

audio.

Sound is distorted.

•

Turn down the volume of the speaker or the

connected device.

Cannot pairthe speaker

with my

Bluetooth device

•Make sure your device is on Bluetooth mode.

•Your Bluetooth device may be out of range.

Try to bring it closer to the speaker.

•

Move your Bluetooth device and/or speaker

away from other devices that generate

electromagnetic interference, such as phones,

microwave ovens, wireless network routers, or

other Bluetooth devices.

EN - ENGLISH

To prevent the possibility of the battery from leaking, heating or catching fire, please follow

these precautions:

Warnings

•

Please use supplied USB charging cable to charge speaker.

•

Please disconnect charging cable after speaker is fully charged.

•

Do not continue to charge speaker after it is fullycharged.

•

Do not use or leave the speaker near a heat source such as a fire or a heater.

•

Do not place speaker in any liquid, fire or on a heater.

•

Do not hit or throw the speaker.

Cautions

•

Do not use or leave speaker in very high temperatures (i.e. in direct sunlight or in a vehicle

in extremely hot conditions)

•

Do not use speaker where there is a lot of static electricity,

otherwise, the safety devices within the speaker can be damaged.

•

The speaker should be stored at room temperature.

•

The speaker battery should be charged and discharged often in order to keep it alive.

•

When playing music during charging, please put the volume to middle, because for some

music with heavy bass, the charger may not be able to afford the high current temporarily

under the maximum volume.

•

In order to prolong the life of battery, please do not charge it more than 8 hours.

•

Please follow battery waste recycling guidelines when disposing of the speaker.

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product or packaging means that the product should not be

treated as household waste. Do not throw garbage at the end of its life, but take it to

a collection center for recycling. in this way you will help to protect the environment

and be able to prevent any negative consequences that it would have on the

environment and human health.

To find your nearest collection center:

•Contact local authorities

•Access the website: www.mmediu.ro

Request additional information from the store where you purchased the product.

IMPORTATOR: INTERVISION TRADING-RO SRL

Bld. I.C Bratianu, nr. 48-52, corp A, etaj. 5,

camera 504-505, oras Pitesti, judet Arges, Romania

Cod postal: 110121

ABTS-70

Boxă Bluetooth portabilă

RO-ROMÂNĂ

MANUALUL UTILIZATORULUI

Caracteristici:

•Boxă portabilă cu lumini

•Funcție AWS

•IPX5 rezistentăla apă

•Bass extrem de adânc cu EQ puternic

•Suportă redarea prin USB și de pe card TF

•Funcție PARTAJRE BATERIE pentru a încărca alte dispozitive mobile

•Raza de acțiune Bluetooth 10 metri

•Baterie reîncărcabilă cu litiu încorporată de 7,4V /3000mAh.

•Autonomie de până la 7 ore la un volum de redare de 50%.

Specificații tehnice:

•Sursa de alimentare: 5V 1A

•Consumul de energie: 5W

•Putere RMS: 40W

•Versiune Bluetooth: 5.0

•Puterea de emisie a canalului Bluetooth: 2dbm

•Frecvență Bluetooth: 2.400-2.483GHz

•Raza de acțiune Bluetooth: 10 metri

•Tipul și tensiunea bateriei: 7.4V/3000mAh litiu ion

•Răspuns în frecvență: 20Hz~20Khz

•Dimensiune driver: radiator pasiv de 3inch*2+

•Dimensiunile produsului: 291(L) *126(d)* 110(h)mm

Conținutul pachetului:

•Boxă portabilă ABTS-70

•Cablu de încărcare USB

•Manual

Detaliile produsului:

1. Buton ON/OFF (pornire/oprire) funcție AWS

2. Indicator funcție AWS

3. Buton mod iluminare LED

4. Redare/Pauză (Play/Pause) | Țineți apăsat pentru a deconecta funcția Bluetooth.

5. Apăsați o dată pentru scăderea volumului | Țineți apăsat pentru melodia anterioară

6. Apăsați o dată pentru creșterea volumului | Țineți apăsat pentru următoarea melodie

7. Țineți apăsat pentru pornire/oprire

8. Indicator LED

•Căutare Bluetooth: iluminare intermitentă rapidă bec ALB

•Conectare Bluetooth reușită: iluminare intermitentă lentă bec ALB

•Mod Line in –bec ALB aprins

•Redare USB –bec ALB aprins

•Redare card Micro SD - iluminare intermitentă bec ROȘU

Detalii din partea din spate a boxei:

Port audio 3.5mm/Line in

Port

Micro SD

Port de încărcare

Micro USB (5V / 1000mA)

4. Funcția de redare USB și încărcare dispozitive

(5V / 1000mA)

5. Indicator LED de încărcare

Becul LED roșu aprins indică faptul că unitatea se

încarcă

Becul LED roșu se va stinge atunci când unitatea

este complet încărcată

Table des matières

Langues :

Autres manuels Akai Intervenants

Akai

Akai ABTS-112 Manuel utilisateur

Akai

Akai A58099 Manuel utilisateur

Akai

Akai A3 REFLEXO Manuel utilisateur

Akai

Akai SYNTHSTATION49 Manuel utilisateur

Akai

Akai A58089 Manuel utilisateur

Akai

Akai ABTSW-30 Instructions d'installation

Akai

Akai Vibes A50000 Manuel utilisateur

Akai

Akai SS047A-381 Manuel utilisateur

Akai

Akai A58067 Manuel utilisateur

Akai

Akai DYNMX Manuel utilisateur

Akai

Akai A58076 Manuel utilisateur

Akai

Akai DJ-Y5L Manuel utilisateur

Akai

Akai CEU7100-BT Manuel utilisateur

Akai

Akai CEU7300-BT Manuel utilisateur

Akai

Akai AWS10WE Manuel utilisateur

Akai

Akai SYDNEY ABT-52 Manuel utilisateur

Akai

Akai CS6 SHINE Manuel utilisateur

Akai

Akai CE7200 Manuel utilisateur

Akai

Akai A58074 Manuel utilisateur

Akai

Akai AWS80BK Manuel utilisateur

Akai

Akai ASB8I Manuel utilisateur

Akai

Akai CEU6800-BT Manuel utilisateur

Akai

Akai GL703-BT Manuel utilisateur

Akai

Akai ACS-506 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur