AirLive WN-360USB Manuel utilisateur
Wireless
11
N
USB
D
ongle
A
irLive WN-360USB
WN-360USB
En
g
lish
Česky
Deutsch
Español
Ελληνικός
Français
...............
.................
..............
..............
...........
.............
Italiano
Magyar
Polski
Português
Русский
Slovensky
...............
...............
................
.........
.............
...........
1
9
16
23
30
37
65
51
58
Table of Contents
List of Languages
44
72
79
1
WN-360USB English
English
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F, NO.6, Lane 130, Min-Chuan Rd.,
Hsin-Tien City, Taipei County, Taiwan
Declare that the product
High Power Wireless 11N USB Dongle
AirLive WN-360USB
is in conformity with
In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive
Clause Description
■ EN 300 328 V1.7.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2.4GHz ISM band
(2006-10) and using spread spectrum modulation techniques; Part 1：technical characteristics and test conditions Part2：Harmonized EN covering
Essential requirements under article 3.2 of the R&TTE Directive
■ EN 301 489-1 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and
(2005-09) Services; Part 17：Specific conditions f or wideband data and HIPERLAN equipment
■ EN 301 489-17 V1.2.1
(2002-08)
■ EN 50392:2002 Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related
to human exposure to electromagnetic field (10MHz – 300GHz)
■ EN 60950-1:2001+All
:2004 Safety for information technology equipment including electrical business equipment
■ CEmarking
Manufacturer/Importer
Signature： ______________
Name ： Albert Yeh
Position/ Title：Vice President
Date： 2008/12/24
2 English WN-360USB
English
Note on the FCC standard
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences
when the equipment is operating in a commercial area. This equipment generates, uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause interference in the
transmission of radio communications. If operating in a residential area, it is probable this equipment will cause
harmful interference, in which case the user will be required to try to correct this interference using his own
means.
Note on CE Marking
This is a Class B product. In a residential area this product may cause radio interference, in which case the user
can be required to take the appropriate measures. OvisLink Corp. hereby declares that AirLive WN-360USB
meets the basic requisites of directive 99/05/CE, and is therefore liable for the accuracy of these data:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan
TEL: +886-2-2218-6888
Warranties
This product has undergone various quality controls to ensure proper operation.
This product is covered by a two-year warranty for countries inside European Union. For other countries, the
warranty period is one year only. In the event of any manufacturing fault or breakdown, it will be repaired by
OvisLink Corp. Please contact your supplier for details on the procedure to follow. This warranty shall not be
applicable in the event of damage caused by improper use of the product, accidents, faulty handling or
manipulation nor any future incompatibility with third party products.
3
WN-360USB English
LED Name Light Status Description
Flash The network card has linked to a
wireless access point and is
receiving or transferring data.
Link/
Activity
Off No wireless activity.
Insert the USB wireless network card into
an empty USB 2.0 port of your computer
when computer is switched on.
Hardware Installation
English
4 English WN-360USB
Driver & Utility Installation
1. Exit all Windows programs. Insert the CD-ROM
into the CD-ROM drive of your computer. If the
CD-ROM is not launched automatically, please
run “D:\autorun.exe” where D is the letter of
your CD-ROM drive.
2. The Main screen of the CD-ROM appears. Select
Install Driver & Utility to start installation.
Utility Installation
1. Please read the end user license agreement and select
“I accept the terms of the license agreement” to accept
license agreement. Click Next.
Please select ‘Allow’ if Windows indicates that ‘an
unidentified program wants access to your computer’.
English
5
WN-360USB English
2. Please select ‘AirLive Configuration Tool’; then
click Next.
3. Please select ‘Optimize for WiFi mode’ for wireless
compatibility, then click Next.
If you want to enhance wireless performance, please
select ‘Optimize for performance mode’. However,
wireless compatibility is not guaranteed in this mode.
Please refer to user manual for details of
performance mode.
If you see ‘Found New Hardware’ message again,
please ignore it and wait.
English
6 English WN-360USB
4. Click Install. 5. Click Continue Anyway.
6. When you see this message, please
click Finish to complete the driver
installation process.
English
7
WN-360USB English
Connect to Wireless Access Point
Using Configuration Utility to Connect to Wireless Access Point
1. After installation is complete, wireless
configuration utility will be shown as an icon at
the lower-right corner of your windows desktop.
Please click the icon by right mouse key, and
select Launch Config Utilities.
2. Configuration utility will scan for wireless
access points automatically, and all found
access points will be displayed. Please
select an access point you wish to connect,
and click Connect.
If the wireless access point you want to connect
does not show here, please click Rescan.
3. You’ll be prompted to input the SSID (the name
of wireless access point) if the SSID of the
access point you want to connect is hidden,
then click OK.
English
The SSID you input here must be identical to the
SSID setting of the wireless access point you want
to connect.
8 English WN-360USB
4. If the wireless access point uses encryption, you have
to input WEP passphrase or WPA preshared key.
Please ask the owner of the wireless access point
you want to connect, and input the correct
passphrase/preshared key here, then click OK. If the
value you inputted here is wrong, you will not be able
to connect to wireless access point.
Authentication type is selected automatically,
please don’t change it.
5. If the wireless access point is successfully
connected, you’ll see a ‘Connected’ message
displayed at the lower-left corner of wireless
configuration utility window. Click OK to exit.
For advanced settings and other features of
this PCI wireless network card, please refer to
user manual enclosed in the supplied CD-ROM
English
Table des matières
Langues :
Autres manuels AirLive Matériel informatique
AirLive
AirLive WN-300USB V3 Manuel utilisateur
AirLive
AirLive WLA-5500CPE Manuel utilisateur
AirLive
AirLive WN-301USB Manuel utilisateur
AirLive
AirLive WN-250USB Manuel utilisateur
AirLive
AirLive WN-370USB Manuel utilisateur
AirLive
AirLive AirVideo-100 Manuel utilisateur
AirLive
AirLive AirVideo-100v2 Manuel utilisateur
AirLive
AirLive WN-370USB Manuel utilisateur
AirLive
AirLive AirVideo-100v2 Manuel utilisateur
AirLive
AirLive AIRVIDEO-100 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
