Airlink101 Redwing CDMA Manuel utilisateur

Redwing CDMA

Quick Start

Version 2.40 - September 2006

September 2006 1

Redwing CDMA for Bell Mobility -

Quick Start, version 2.40

You can find the Setup Wizard installation on the CD which came with your modem or on the Air-

Link website: http://www.airlink.com/support. Use only the Setup Wizard for Bell Mobility for best

results.

b. Connect the power adapter and antenna to your Redwing.

c. Install the Setup Wizard by running Bell MobilitySetupWizard.exe and follow the prompts.

d. Run the Setup Wizard from the Windows Start menu.

Start>All Programs>AirLink Communications>Setup Wizard>Setup Wizard

This Quick Start guide details using the Setup Wizard for the initial setup and any configuration

necessary to register your AirLink Redwing online with Bell Mobility. For additional modem

configuration options, please refer to the Redwing CDMA for Bell Mobility User Guide.

1. Starting the Setup Wizard

Note: The Setup Wizard requires the Microsoft .NET framework v. 1.1 and

Microsoft Windows 98, Windows 2000, Windows XP, or later.

a. Connect the Redwing to your computer using a serial cable.

September 2006 2

Redwing CDMA for Bell Mobility - Quick Start, version 2.40

After the Setup Wizard connects it should show the details for your modem. If the incorrect modem

is displayed, press the Reset Button on your modem. Click Next.

2. Connecting to the Modem

The Setup Wizard needs to establish a connection to your modem. When it connects, The Setup

Wizard will automatically detect the model of your modem to offer specific tasks.

Select Connected to a Serial Port, check Auto Detect Port Settings or select the port from the

drop down menu. Click Next.

3. Selecting Tasks

After the model of your Redwing is detected, you will be

offered Setup tasks. Choose the tasks you need. Some

tasks shown here might not be available for your Redwing

model.

Click Next when you have selected your desired options.

Activate Modem: Configure your Redwing to connect on the Bell Mobility network.

Update PRL List: Update to Bell Mobility’s most current PRL.

Test Modem Setup: Verify your Redwing is properly configured and connecting on Bell Mobil-

ity’s network.

Setup a DUN Connection: Create a Dial-Up Networking entry for local connection. This part of

the setup is only needed if you will be using your Redwing to connect directly from a computer to

the Internet or other network.

September 2006 3

Redwing CDMA for Bell Mobility - Quick Start, version 2.40

To configure or provision your modem to work on the Bell Mobility network, you will need device

activation information provided by Bell Mobility. Fill in the requested information and Click Next.

Once you have entered all the requested settings, the modem will check your signal strength, RSSI.

Click Next to begin “provisioning” and setting the configuration into memory. The process may

take a few minutes. Progress information will display across the bottom.

4. Activate the Redwing

•MSL (also known as the Master Subsidy LockCode, MSL or OTKSL, Activation Code, or

NAM Lock Code) is the code needed to enter data into the Redwing.

Caution: If this is not set to the correct Master Code for your Redwing, the PRL

Update will fail.

C3110 only.

•Mobile Identification Number (MIN), the ten digit number assigned to your account.

•Network Access Identifier (NAI) and Password. The fields for NAI and @should be filled in

for you. Verify they are correct and enter the password you have been given for your account.

If you have an account with a static IP address, use the drop down menu for the @field to

select static.1x.bell.ca.

September 2006 4

Redwing CDMA for Bell Mobility - Quick Start, version 2.40

The Preferred Roaming List (PRL) is a list of network identifiers your modem uses to connect to

the network. Occasionally this list is modified by Bell Mobility as they alter their network foot-

print.

The version of the PRL will be automatically detected. It is recommended you ensure you have an

updated PRL so your modem will be performing optimally.

5. Update PRL List (C3110 only)

Note: If you do not have a C3110, this section is omitted from the Wizard.

6. Test Modem Setup

Your Redwing’s connection to the Bell Mobility cellular network is tested.

September 2006 5

Redwing CDMA for Bell Mobility - Quick Start, version 2.40

Green checks in the boxes indicate the tests were successful and your Redwing is functioning prop-

erly. At this point your modem is configured and activated to work on the Bell Mobility network.

Dial-up Networking (DUN) allows a computer or other device to use an AirLink modem to con-

nect to the Internet or private network just like an analog modem using a standard phone line. The

Setup Wizard will install a driver for the modem and set up the connection between your computer

and the modem. You will need to have administrator access on the computer for this section of the

installation.

Select Install to begin adding the driver for the AirLink modem to your computer. The COM port

and speed should match your modem (the default settings will be pre-entered). Select Next to begin

the modem driver installation. You will see a confirmation box from Microsoft Windows to spec-

ify you wish to install this driver on your computer. Select Continue Anyway to install the driver.

Note: These tests, depending on the

strength of your signal, may take a few

minutes. Initially, while the tests are being

performed, there may be red Xs in the

boxes.

Caution: If your PRL is out of date, you may experience trouble with activating

your modem on Bell Mobility’s network. You should check to be sure you have

the most recent Setup Wizard available on the AirLink website or consult with the

Redwing CDMA for Bell Mobility User Guide on how to update the PRL over the

air.

If you want to verify connectivity to the Internet with your Redwing modem, you

need to set up a DUN connection.

7. Setting up a DUN Connection

If you already have other modems installed on

your computer, they will be listed on the AirLink

Modem Installation screen. If you have other

modems installed on your computer using the same

serial port, they may conflict. As long as you do

not intend to use them, you can Remove other

modems using this menu.

September 2006 6

Redwing CDMA for Bell Mobility - Quick Start, version 2.40

When the driver is installed, you will return to the AirLink Modem Installation screen. The Air-

Link modem should now be listed (in addition to any other modem installed).

Select Next to begin installing the DUN connection.

From the drop down menu, select the AirLink modem. The defaults for the phone number, user

name and password will already be entered. Select Next to begin the install.

At the completion of the DUN installation, you will return to the Dial-up Networking Connection

screen. The AirLink modem should now be listed as a connection.

Your modem is now ready to be used as a DUN device for any applications on your computer

needing a network connection. If you have DUN installed for more than one modem, you will

need to specify in your application which DUN to use. Unless it is the only DUN, your AirLink

modem may not be the one your computer sees as a default.

Your AirLink Redwing should be mounted in a position that allows easy access for the cables so

they are not bent or constricted. The LEDs on the front panel should be visible for ease of opera-

tional verification. You should ensure that there is adequate airflow around the modem but that it is

kept free from direct exposure to the elements (sun, rain, etc.)

If you already have a DUN connection installed for

a different modem, it will be listed on the Dial-up

Networking Connection screen.

Select Add to create a new connection for the Air-

Link modem.

Hardware Installation

An optional accessory for your modem is a mounting kit. The bracket is designed to snugly cra-

dle the modem and hold it in place where you need it.

Connecting the Antenna

Your AirLink Redwing will work with most Dual-Band PCS cellular antennas with a TNC con-

nector that works in the high and low frequencies of CDMA . Connect the antenna or RF cable

directly to the TNC connector on the back of the Redwing.

September 2006 7

Redwing CDMA for Bell Mobility - Quick Start, version 2.40

Your Redwing can be used with either DC (available in most automobiles) or 110 AC (standard

US wall power) with the appropriate power adapter (available from AirLink).

The power cable positive lead should be connected to the battery or power source positive termi-

nal. The power cable negative lead should be connected to the battery or power source negative ter-

minal. The Redwing has an internal polysilicon circuit breaker that opens at 0.5 to 1.0 amps of

current.

When your Redwing is connected to power and an antenna, there is a specific pattern to the lights

to indicate its operation mode. Refer to the User Guide for more information on light patterns.

AirLink Technical Support

If you encounter problems with operation of your Redwing, AirLink’s support staff can help.

Connecting power

Connecting the Redwing to a computer or other device

Your Redwing’s serial port can be connected directly to most computers or other devices using a

standard straight through cable. If you have a DCE device, you will need a null modem or null

modem cable.

Your Redwing can also be connected to a USB to serial device connected to a computer or other

device which does not have an available serial port but does have USB.

Redwing Indicator Lights

Net (network) - Indicates when there is traffic on the network.

Pwr (power) -Indicates the power adapter is connected and there is power getting to the modem.

The Reset button performs the same function as unplugging power from the modem and plugging

it back in. Reset will not alter any saved configuration settings.

Refer to the User Guide for your modem or the AirLink website for AirLink prod-

uct warranties.

September 2006 8

Redwing CDMA for Bell Mobility - Quick Start, version 2.40

AirLink Support Web Site

The AirLink web site is updated frequently with Setup Wizards, Utilities, How-To Guides, and

other documentation: http://www.airlink.com/support.

AirLink Documentation and Guides

•Modem User Guides - These guides are specific to your modem type, cellular provider, and

cellular technology and contain comprehensive information about the operation of the modem

and its features.

•Modem Quick Start guides - These guides are also specific to the modem type, cellular pro-

vider, and cellular technology and are a step by step guide to activating the modem using the

Setup Wizard or other steps as applicable.

•Utility Guides - These guides focus on the features of one of the AirLink modem utilities:

Wireless Ace, AceView, AceNet, Modem Doctor, etc.

•Application Notes and How-To Guides - These guides detail configuring the modem to work

with a specific feature set or how the modem can be set up to work with a specific 3rd party

(non-AirLink) device.

•Data Sheets and White Papers - These are technology based information documents.

Contacting Technical Support

For support assistance please email [email protected] or call 510-781-9760 Monday through

Friday 5 AM to 5 PM Pacific Time (8 AM to 8 PM Eastern Time). Support is not available week-

ends or holidays.

Autres manuels pour Redwing CDMA

Table des matières

Autres manuels Airlink101 Modem

Airlink101

Airlink101 XR90 Manuel utilisateur

Airlink101

Airlink101 H4323-C - PinPoint X HSUPA Manuel utilisateur

Airlink101

Airlink101 H4223-CD - Raven X HSUPA Manuel utilisateur

Airlink101

Airlink101 Raven G3210 Mode d'emploi

Airlink101

Airlink101 Redwing CDMA Series Manuel utilisateur

Airlink101

Airlink101 Redwing CDMA Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur