AIPTEK GS 510 Plus Manuel utilisateur
EN
User’s Manual
ENDEFRIT
GS 510 Plus
1
Welcome
Thank you very much for purchasing this product. Before you start,
you are recommended to read this manual step by step to obtain the
best results with your new auto camcorder. We hope you enjoy it.
AIPTEK Team
About the Product
GS 510 Plus is specifically designed for video recording whilst driving.
In the case of an emergency the embedded bump sensor
automatically detects the accident and saves the action with position
data on protected memory. GS 510 Plus features Super HD 2304 x
1296p video resolution, GPS tracking, and 160° wide-angle lens.
Super HD provides 44% more details than Full HD; the GPS tracking
records GPS data in the video and allows you to track the driving
route on Google Maps. Aiptek GS 510 Plus records full action on the
road in the best quality.
Important Notice
1. Please do not install this auto camcorder at a place that would
obstruct or reduce a driver’s view. Make sure your usage complies
with the vehicle codes of your state or country.
2. Do not drop, puncture or disassemble the device and charger;
otherwise the warranty will become void.
3. Avoid all contact with liquids. Dry your hands before using the
device.
4. Use the device with care. Avoid pressing hard on the device body.
5. Only use the accessories supplied by the manufacturer.
6. Keep the device out of the reach of infants.
7. When you get out of the car, do not leave the device on the
dashboard where it is subject to direct sunlight or extreme
temperatures (too high or too low) which tend to degrade or
damage the unit and it’s normal functionality.
EN
2
8. For your own safety, do not operate the controls of the product
while driving. This product is intended to be used as an auto
camcorder aid only.
9. The cigarette lighter of your car may or may not continue to
supply power after the engine is turned off. Please disconnect the
charger from the cigarette lighter before leaving the car to prevent
the car’s battery from going flat or other accidents.
10. For software or manual update, please visit the official website:
http://www.aiptek.eu
If the time arises to throw away your product, please recycle all the
components possible. Batteries and rechargeable batteries are not to
be disposed in your domestic waste! Please recycle them at your
local recycling point. Together we can help to protect the
environment.
Package Content
GS 510 Plus
Windshield mount
Car charger
USB cable
User’s Manual
Warranty card
Software Download
Addendum
EN
3
Product Overview
༃Connection slot
༄Lens
༅Power connector / Mini USB port
༆HDMI port
༇GPS port
༈LED Indicator
༉Speaker
༊LCD display
་Emergency Record / Exit
༌ˏUp / Playback
།ˑDown / Menu
༎OK / Record or Stop
༏Power On/Off
༐MicroSD card slot
༃
༄
༅
༆
༇
༈
༉
༊
་
༌
།
༎
༏
༐
EN
4
Use a Memory Card
1. Use a MicroSD card with at least Class 6 and 8 GB, Max. 32 GB.
2. Insert and remove the memory card when the camcorder is
turned off. Do not remove the memory card while recording.
This may damage the memory card.
3. Be sure to format the MicroSD card before the initial usage to
ensure read / write stability.
4. We strongly recommend that the memory card is strictly used
for this auto camcorder only.
Install the Car Camcorder
1. Follow the instructions to slide the windshield bracket mount
into the connection slot of the car camcorder. Connect the USB
GPS cable to the GPS port on car camcorder.
2. Position the suction-cup near the rear mirror in a position of the
windshield which does not obstruct the view.
Connect the Power
1. Connect one end of the car charger to the mini USB connector
on the auto camcorder.
EN
5
2. Plug the other end of the car charger into the cigarette lighter
socket of your car. When power is available on the cigarette
lighter (usually when the engine is started), the camcorder
automatically turns on.
3. You can manually turn on the car camcorder by pressing the
power button for 3 seconds or turn it off by pressing the
button for 5 seconds.
Screen Icons
Emergency
Record
Playback Menu Record
Power On/Off
No. of Emergency File
Saving Emergency File
Recording Emergency File
Traffic Sign Recognition
Stop & Go
Microphone
Recording
duration
Video
Resolution
duration
GPS signal received
EN
6
Set Language
1. Press to enter Menu.
2. Use ˌto scroll down the menu and find ‚Language‘. Press OK to
enter the language setting and confirm the preferred language
by pressing OK.
3. To exit Menu, press (Emergency Record) to return to preview.
Set Date & Time / Time Zone
Please set the date and time before using the auto camcorder for the
first time or after two weeks without use.
1. Press to enter Menu.
2. Use ˌto scroll down the menu and find ‚Date/Time‘. Press Ÿor
ˌto enter current date and time; press OK to confirm the setting.
3. To make sure the GPS tracker synchronizes correctly with your
time zone, setup the Time Zone, e.g., GMT+0 in the UK.
4. During Daylight Saving Time (Summer time), please manually
turn on the setting.
NOTICE!
Incorrect time zone will result in wrong time displayed in the
videos!
GPS Tracking Function
After the car camcorder is turned on, the camcorder automatically
searches for the satellite signal. It usually takes less than 30 seconds
but sometimes takes longer to get the signal. With the GPS tracking
EN
7
function, the car camcorder records the GPS information
(X: Longitude, Y: Latitude, and Speed) along with the recorded videos.
GPS Signal Status:
: Receiving GPS signal ?: Searching GPS signal
Record Video
1. Automatic Record
You can enable ‘Automatic Record’ function in the menu to
automatically start video recording once the camcorder connects to
the power supply (or when the vehicle engine gets started).
Recording will automatically stop when the engine is switched off or
the charger is unplugged. To manually stop recording, press OK
button shortly.
Loop Recording:
The videos are recorded as 5 minutes per clip and saved on MicroSD
card. When the MicroSD card is full, the oldest recordings on the
card will be overwritten by new recordings.
2. Manual Record
When the automatic record function is disabled, you can start or
stop recording by pressing OK button shortly.
3. Emergency Record :
Bump Auto Record
EN
8
When ‘Bump Auto Record’ (recommended) function is enabled (see
options in Menu), the auto camcorder automatically saves the video
1 minute before and after the event happens in the folder named
‘EmgRec’ (Emergency Recordings) when an impact on the vehicle is
detected. The videos in EmgRec folder are protected from deletion
and overwriting.
Manual Emergency Record
During a recording session, you can manually press the
emergency record button to start emergency recording.
NOTICE!
1. During Bump Auto Record and manual Emergency Record, a
yellow symbol will be displayed at the top of the screen.
2. After symbol disappears, the file saving symbol will
appear on the screen until the file saving in EmgRec folder is
completed.
3. During emergency recording, pressing other buttons will stop
the emergency recording.
4. Emergency recording saves up to 10 video clips. Please free
space by making a copy of the emergency recording files right
after the event happened.
EN
Table des matières
Langues :
Autres manuels AIPTEK Caméra embarquée
