Aim GPS09c Manuel utilisateur

Quick Guide

GPS09c Open

Release 1.01

1 – The system

The GPS09c Open features three output streams:

•open CAN connection. Freely user configurable

•open RS232 connection. Freely user configurable

•AiM CAN connection. To be connected as expansion using the AiM CAN network

The Module comes with a 7 pins Binder 712 male connector whose pinout is shown here below.

The module comes with a 7-pin connector, as shown in fig 1, to which you may connect the proper cable, in dependance upon the

connection you need to manage:

2 – Configuration

In order to configure GPS09c Open you need to connect it to your PC using the proper cable shown:

After having connected the GPS09C to your PC USB cable, you have to run our software RaceStudio3 and use the configuration manager

for configuring it.

2.1 – CAN Bus connection (default)

If you select the CAN Open stream, you may configure the CAN messages you need. It is possible to set the baud rate for the CAN bus

and, for every message:

•ID

•DLC (1- 8 bytes)

•Bye order (little endian, big endian)

•Message frequency (1-5-10-25 Hz)

The information the GPS09c Open may transmit in CAN are:

•

Altitude

•Latitude

•Longitude

•Sats number

•Pos Accuracy

•Speed Accuracy

•GPS Lateral acceleration

•GPS Linear acceleration

•GPS Heading

•GPS Yaw rate

•

GPS Hour

•GPS Min

•GPS Sec

•GPS Millisec

•Year

•Month

•Day

•Week number

•ITOW

•Unix Time

2.2 – RS232 Messages

If you set GPS09c Open in order to transmit an RS232 stream, it will transmit the standard NMEA messages.

It is of course possible to set all the parameters related to the RS232 protocol, and the frequency at which every message is transmitted.

The messages the system may transmit are:NMEA DTM

•NMEA DTM

•NMEA GBS

•NMEA GGA

•NMEA GLL

•NMEA GNS

•NMEA GRS

•NMEA GSA

•NMEA GST

•NMEA GSV

•NMEA RLM

•NMEA RMC

•NMEA VLW

•NMEA VTG

•NMEA ZDA

•NMEA TXT

The meaning of all these NMEA messages is described in www.nmea.org

2.3 – AiM CAN connection

In case you need to connect the device to an AiM CAN Network, you have to select AiM CAN Connection: the device is automatically

managed by the AiM dash or logger, so you don’t need to configure anything else.

Ce manuel convient aux modèles suivants

Autres manuels Aim Unité de contrôle

Aim

Aim AXC-FDX-2 Manuel utilisateur

Aim

Aim MoTeC M400 Manuel utilisateur

Aim

Aim STANAG3910 Manuel utilisateur

Aim

Aim APE429-32 Manuel utilisateur

Aim

Aim ANET1553-1 Manuel utilisateur

Aim

Aim AMCX-FDX-2 Manuel utilisateur

Aim

Aim ARINC 429 Manuel utilisateur

Aim

Aim GPS05 Module Manuel utilisateur

Aim

Aim AFDX / ARINC 664 Manuel utilisateur

Aim

Aim eBox Gold Manuel utilisateur

Aim

Aim MIL-STD-1553 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur