Agilent Technologies U1731B Manuel
Agilent Technologies
Agilent U1731B/U1732B
Dual Display Handheld
LCR Meter
User’s and Service Guide
II U1731B/U1732B User’s and Service Guide
Notices
© Agilent Technologies, Inc. 2009 – 2012
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
U1731-90059
Edition
Third Edition, March 21, 2012
Printed in Malaysia
Agilent Technologies, Inc.
5301 Stevens Creek Blvd.
Santa Clara, CA 95051 USA
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connec-
tion with the furnishing, use, or per-
formance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Soft-
ware and technical data rights granted to
the federal government include only those
rights customarily provided to end user cus-
tomers. Agilent provides this customary
commercial license in Software and techni-
cal data pursuant to FAR 12.211 (Technical
Data) and 12.212 (Computer Software) and,
for the Department of Defense, DFARS
252.227-7015 (Technical Data - Commercial
Items) and DFARS 227.7202-3 (Rights in
Commercial Computer Software or Com-
puter Software Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and
met.
U1731B/U1732B User’s and Service Guide III
Safety Symbols
The following symbols on the instrument and in the documentation
indicate precautions that must be taken to maintain safe operation of the
instrument.
Direct current Off (supply)
Alternating current On (supply)
Both direct and alternating
current
Equipment protected throughout
by double insulation or reinforced
insulation.
Three-phase alternating current Caution: risk of electric shock.
Earth (ground) terminal Caution: risk of danger (refer to
this manual for specific Warning
or Caution information.
Protective conductor terminal Caution: hot surface.
Frame or chassis terminal Out position of a bi-stable push
control.
Equipotentiality In position of a bi-stable push
control.
IV U1731B/U1732B User’s and Service Guide
Regulatory Markings
Waste Electrical and Electronic Equipment (WEEE) Directive
2002/96/EC
This instrument complies with the WEEE Directive (2002/96/EC) marking
requirement. This affixed product label indicates that you must not
discard this electrical/electronic product in domestic household waste.
Product Category:
With reference to the equipment types in the WEEE directive Annex 1,
this instrument is classified as a “Monitoring and Control Instrument”
product. The affixed product label is shown as below:
Do not dispose in domestic household waste
To return this unwanted instrument, contact your nearest Agilent office,
or visit:
www.agilent.com/environment/product
for more information.
The CE mark is a registered
trademark of the European
Community. This CE mark shows
that the product complies with all
the relevant European Legal
Directives.
The C-tick mark is a registered
trademark of the Spectrum
Management Agency of Australia. This
signifies compliance with the Australia
EMC Framework regulations under the
terms of the Radio Communication Act
of 1992.
ICES/NMB-001 indicates that this
ISM device complies with Canadian
ICES-001.
This instrument complies with the
WEEE Directive (2002/96/EC) marking
requirement. This affixed product label
indicates that you must not discard this
electrical/electronic product in
domestic household waste.
U1731B/U1732B User’s and Service Guide V
General Safety Information
The following general safety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards for design, manufacture, and
intended use of the instrument. Agilent Technologies assumes no liability
for the customer’s failure to comply with these requirements.
WARNING
• This meter is for indoor use at an altitude of up to 2,000 m.
• The warnings and precautions should be read and well understood
before the meter is used.
• Use this meter only as specified in this manual; otherwise, the
protection provided by the meter may be impaired.
• When measuring in-circuit components, first de-energize the
circuits before connecting them to the test leads.
• Discharge the capacitor before testing.
• The meter is safety-certified in compliance with IEC 61010-1.
• Use the meter only as specified in this manual. Otherwise, the
protection provided by the meter may be impaired.
• The power for the meter is supplied with a single standard 9 V
battery. Line operation is also possible using a 12 VAC to DC adaptor.
If a power adaptor is selected, please be sure to meet the safety
requirements of a relevant IEC standard.
CAUTION
• Ensure proper insertion of the battery in the LCR meter, and follow the
correct polarity.
VI U1731B/U1732B User’s and Service Guide
Environmental Conditions
This instrument is designed for indoor use in areas with low condensation
and to be used with standard or compatible test probes. Table 1 shows
general environment requirements.
Table 1 Environment requirements
Environment Conditions Requirements
Operating environment 0 °C to 40 °C; 0 – 70% R.H.
Storage humidity 0 – 80% R.H. non condensing
Storage environment –20 °C to +50 °C; 0 – 80% R.H.
Altitude 0 – 2,000 meters
Pollution degree Pollution degree 2
U1731B/U1732B User’s and Service Guide VII
CAUTION
The U1731B/U1732B dual display handheld LCR meter complies with
the following safety and EMC requirements:
• IEC 61010-1:2001/EN 61010-1:2001 (2nd Edition)
• CISPR 11:2003+A1:2004
• IEC 61000-4-2:1995+A1:1998 +A2:2000
• IEC 61000-4-3:2006
• IEC 61000-4-4:2004
• IEC 61000-4-5:2005
• IEC 61000-4-6:2003+A1:2004+A2:2006
• IEC 61000-4-11:2004
• Canada: ICES/NMB-001:2004
• Australia/New Zealand: AS/NZS CISPR11:2004
CAUTION
Degradation of some product specifications can occur in the presence
of ambient electromagnetic (EM) fields and noise that affects the
product's power line, communication, or I/O cables. The product
self-recovers and operates to all specifications when:
• the source of the ambient EM field and noise is removed,
• the product is protected from the ambient EM field, or
• the product cabling is shielded from the ambient EM noise.
VIII U1731B/U1732B User’s and Service Guide
Declaration of Conformity (DoC)
The Declaration of Conformity (DoC) for this instrument is available on the Web
site. You can search the DoC by its product model or description.
http://regulations.corporate.agilent.com/DoC/search.htm
NOTE
If you are unable to search for the respective DoC, please contact your local
Agilent representative.
U1731B/U1732B User’s and Service Guide IX
In This Guide…
1Getting Started Chapter 1 introduces key features and steps to get started
with a U1731B/U1732B dual display handheld LCR meter. This chapter also
guides you through the basics of the front panel operations.
2Features and Functions Chapter 2 explains how to set up connections to
perform meter measurements. It also describes the features and functions that
are available in the U1731B/U1732B dual display handheld LCR meter in
step-by-step instructions.
3Service and Maintenance Chapter 3 explains the services and maintenance
procedures for the U1731B/U1732B dual display handheld LCR meter.
4Specifications Chapter 4 lists the specifications and characteristics of the
U1731B/U1732B dual display handheld LCR meter.
X U1731B/U1732B User’s and Service Guide
Autres manuels pour U1731B
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Agilent Technologies Instrument de mesure
Agilent Technologies
Agilent Technologies E4991A Manuel utilisateur
Agilent Technologies
Agilent Technologies E5072A Manuel utilisateur
Agilent Technologies
Agilent Technologies 4294A Manuel utilisateur
Agilent Technologies
Agilent Technologies LogicWave Manuel utilisateur
Agilent Technologies
Agilent Technologies 5062-8218 Manuel d'installation et d'exploitation
Agilent Technologies
Agilent Technologies 622Vu Advisor Manuel utilisateur
Agilent Technologies
Agilent Technologies E4440A Guide de démarrage rapide
Agilent Technologies
Agilent Technologies Flow Tracker 1000 Series Manuel d'utilisation
Agilent Technologies
Agilent Technologies ENA Series Manuel utilisateur
Agilent Technologies
Agilent Technologies PNA Series Manuel utilisateur
Agilent Technologies
Agilent Technologies ESA-E Series Manuel du propriétaire
Agilent Technologies
Agilent Technologies InfiniiVision 6000 Series Manuel utilisateur
Agilent Technologies
Agilent Technologies 4286A Manuel utilisateur
Agilent Technologies
Agilent Technologies E8362A PNA Series Guide de démarrage rapide
Agilent Technologies
Agilent Technologies PNA Series Manuel utilisateur
Agilent Technologies
Agilent Technologies E5052A Manuel utilisateur
Agilent Technologies
Agilent Technologies U1211A Manuel utilisateur
Agilent Technologies
Agilent Technologies Agilent 4396B Manuel utilisateur
Agilent Technologies
Agilent Technologies X Series Manuel utilisateur
Agilent Technologies
Agilent Technologies N4906B Serial BERT Manuel utilisateur
Agilent Technologies
Agilent Technologies UXA N9040B Manuel d'installation et d'exploitation
Agilent Technologies
Agilent Technologies 5977B Series Manuel utilisateur
Agilent Technologies
Agilent Technologies E5406A-Pro Series Manuel utilisateur
Agilent Technologies
Agilent Technologies 53147A Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur