Agilent Technologies Agilent 4396B Manuel utilisateur

Agilent 4396B Network/Spectrum/Impedance Analyzer

PERFORMANCE TEST MANU

SERIAL NUMBERS

This manual applies directly to instruments with serial

number prex JP1KE, or rmware revision 1.01 and below

or additional important information about serial

numbers

,read \Serial Number" in Appendix A.

Agilent Part No. 04396-90130

Printed in Japan March 2000

Third Edition

Notice

The information contained in this document is subject to change without notice

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of the Agilent T

echnologies.

Agilent T

echnologies Japan, Ltd.

Component T

est PGU-Kobe

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo

,651-2241 Japan



1997,2000 Agilent Technologies Japan, Ltd.

Manual Printing History

March 1997

::::::::::::: ::::

::::::::::::::: :: :: :

First Edition (part number: 04396-90120)

July 1997

::::::::: ::::

::::::::::::::: :: :: :: ::

Second Edition (part number: 04396-90130)

March 2000

:::::::

:::: :: :: :: :::::::::::::::

:::: ::

Third Edition (part number: 04396-90130)

iii

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service

,and repair of this instrument. F

ailure to comply with these precautions or with specic

ARNINGS

elsewhere in this manual may impair the protection provided by the equipment.

In addition it violates safety standards of design, manufacture, and intended use of the

instrument.

The A

gilent T

echnologies assumes no liability for the customer's failure to comply with these

requirements

Note

4396B comply with INST

ALLA

TION CA

TEGORY II and POLLUTION DEGREE 2

in IEC1010-1. 4396B are INDOOR USE product.

Note

LEDs in 4396B are Class 1in accordance with IEC825-1.

CLASS 1LED PRODUCT

Ground The Instrument

oavoid electric shock hazard, the instrument chassis and cabinet must be connected to a

safety earth ground by the supplied power cable with earth blade

DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of ammable gasses or fumes

.Operation of any

electrical instrument in such an environment constitutes adenite safety hazard.

Keep A

way From Live Circuits

Operating personnel must not remove instrument covers

.Component replacement and internal

adjustments must be made by qualied maintenance personnel. Do not replace components

with the power cable connected. Under certain conditions

,dangerous voltages may exist even

with the power cable removed. T

oavoid injuries

,always disconnect power and discharge

circuits before touching them.

DO NOT Service Or A

djust Alone

Do not attempt internal service or adjustment unless another person, capable of rendering rst

aid and resuscitation, is present.

DO NOT Substitute P

arts Or Modify Instrument

Because of the danger of introducing additional hazards

, do not install substitute parts or

perform unauthorized modications to the instrument. Return the instrument to a Agilent

echnologies Sales and Service Oce for service and repair to ensure that safety features are

maintained.

Dangerous Procedure W

arnings

,such as the example below

,precede potentially dangerous procedures throughout

this manual. Instructions contained in the warnings must be followed.

arning

Dangerous voltages

, capable of causing death, are present in this

instrument. Use extreme caution when handling, testing, and adjusting

this instrument.

Certication

Agilent T

echnologies certies that this product met its published specications at the time

of shipment from the factory. Agilent T

echnologies further certies that its calibration

measurements are traceable to the United States National Institute of Standards and

echnology

,to the extent allowed by the Institution's calibration facility

,orto the calibration

facilities of other International Standards Organization members.

arranty

This Agilent T

echnologies instrument product is warranted against defects in material and

workmanship for aperiod of one year from the date of shipment, except that in the case of

certain components listed in

General Information

of this manual, the warranty shall be for the

specied period. During the warranty period, Agilent Technologies will, at its option, either

repair or replace products that prove to be defective

or warranty service or repair

,this product must be returned to aservice facility designated by

Agilent Technologies

.Buyer

shall prepay shipping charges to Agilent T

echnologies and Agilent

echnologies shall pay shipping charges to return the product to Buyer

.However

,Buyer shall

pay all shipping charges

,duties

,and taxes for products returned to Agilent T

echnologies from

another country

Agilent T

echnologies warrants that its software and rmware designated by Agilent

echnologies for use with an instrument will execute its programming instruction when

property installed on that instrument. Agilent T

echnologies does not warrant that the operation

of the instrument, or software

,or rmware will be uninterrupted or error free.

Limitation Of W

arranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate

maintenance by Buyer

,Buyer-supplied software or interfacing, unauthorized modication or

misuse

,operation outside the environmental specications for the product, or improper site

preparation or maintenance

No other warranty is expressed or implied. A

gilent T

echnologies specically disclaims the

implied warranties of merchantability and tness for a particular purpose

Exclusive Remedies

The remedies provided herein are buyer's sole and exclusive remedies

gilent T

echnologies

shall not be liable for any direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory

Assistance

Product maintenance agreements and other customer assistance agreements are available for

Agilent T

echnologies products

or any assistance

,contact your nearest Agilent Technologies Sales and Service Oce

ddresses are provided at the back of this manual.

vii

Safety Symbols

General denitions of safety symbols used on equipment or in manuals are listed below

Instruction manual symbol: the product is marked with this symbol when it is

necessary for the user to refer to the instruction manual.

Alternating current.

Direct current.

On (Supply).

O (Supply).

In position of push-button switch.

Out position of push-button switch.

Frame (or chassis) terminal. A connection to the frame (chassis) of the

equipment which normally include all exposed metal structures

High voltage terminals : terminals fed from internal or external sources by

voltages which may exceed 1000 volts.

This

arning

sign denotes ahazard. It calls attention to aprocedure

,practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in injury or death to personnel.

This

Caution

sign denotes ahazard. It calls attention to aprocedure

,practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in damage to or destruction of part or all of the product.

Note

denotes important information. It calls attention to aprocedure

practice

,condition or the like

,which is essential to highlight.

Axed to product containing static sensitive devices use anti-static handling

procedures to prevent electrostatic discharge damage to component.

viii

Documentation Map

The following manuals are available for the analyzer

ask Reference (Agilent P

art Number 04396-90030)

Task Reference helps you to learn how to use the analyzer

.This manual provide simple

step-by-step instruction, without concepts

User's Guide (Agilent P

art Number 04396-90031)

The User's Guide walks you through system setup and initial power-on, shows how to

make basic measurements

,explains commonly used features

,and typical application

measurement examples

.After you receive your analyzer

,begin with this manual.

Function Reference (Agilent P

art Number 04396-90052)

Function Reference describes all function accessed from the front panel keys and

softkeys

,and provides information on options and accessories available, specications,

system performance

,and some topics about the analyzer's features.

Programming Guide (Agilent P

art Number 04396-90043)

The Programming Guide shows how to make basic program to control the analyzer by a

controller by GPIB

GPIB Command Reference (Agilent P

art Number 04396-90044)

GPIB Command Reference provides asummary of all available GPIB command, and

information on status reporting structure and trigger system correspond to SCPI.

HP instrument BASIC Users Handbook (Agilent P

art Number E2083-90000)

The HP instrument B

ASIC Users Handbook introduces you to the HP instrument B

ASIC

programming language

,provide some helpful hints on getting the most use from it, and

provide ageneral programming reference

.It is divided into three books

HP instrument

ASIC Programming T

echniques

HP instrument B

ASIC Interface T

echniques

,and

instrument B

ASIC Language R

eference

erformance T

est Manual (Agilent P

art Number 04396-90130)

The P

erformance T

est Manual explains how to verify conformance to published

specications

Service Manual (Option 0B

W only), (Agilent P

art Number 04396-90121)

The Service Manual explains how to adjust, troubleshoot, and repair the instrument.

This manual is option 0BW only

Autres manuels pour Agilent 4396B

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies 7890 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies Cary 50 Manuel utilisateur

Agilent Technologies

Agilent Technologies B2901 Manuel utilisateur

Agilent Technologies

Agilent Technologies G8610A Manuel utilisateur

Agilent Technologies

Agilent Technologies Flow Tracker Series Manuel utilisateur

Agilent Technologies

Agilent Technologies OmniBER OTN J7232A Mode d’emploi

Agilent Technologies

Agilent Technologies 83438A Manuel utilisateur

Agilent Technologies

Agilent Technologies 34134A Manuel utilisateur

Agilent Technologies

Agilent Technologies 1290 Infinity II 2D-LC Solution Manuel utilisateur

Agilent Technologies

Agilent Technologies E5071C Manuel utilisateur

Agilent Technologies

Agilent Technologies OmniBER OTN Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 16962A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8453 Manuel utilisateur

Agilent Technologies

Agilent Technologies E4416A Manuel utilisateur

Agilent Technologies

Agilent Technologies Flow Tracker 1000 Manuel utilisateur

Agilent Technologies

Agilent Technologies 35670A Manuel utilisateur

Agilent Technologies

Agilent Technologies 85051B Manuel

Agilent Technologies

Agilent Technologies E4419B Manuel utilisateur

Agilent Technologies

Agilent Technologies 81200 Manuel utilisateur

Agilent Technologies

Agilent Technologies N5230A Manuel utilisateur

Agilent Technologies

Agilent Technologies PSA Series Guide de démarrage rapide

Agilent Technologies

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Instructions d'utilisation et de sécurité

Agilent Technologies

Agilent Technologies 81950A Manuel utilisateur

Agilent Technologies

Agilent Technologies E4980A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur