Agilent Technologies 16900 Series Manuel utilisateur

Agilent Technologies

16910/11A Logic Analyzers

Service Guide

Publication number 16910-97000

April 2004

For Safety and Regulatory information, see the pages at the end of the book.

Advanced Test Equipment Rentals

www.atecorp.com 800-404-ATEC (2832)

Chapter :

The Agilent 16910/11A Logic Analyzers—At a Glance

The Agilent Technologies 16910A and 16911A are logic analyzer modules for the

Agilent Technologies 16900-series logic analysis system. The 16910/11A offers

high performance measurement capability.

Features

Some of the main features of the 16910/11A are as follows:

• 98 data channels (16910A)

• 64 data channels (16911A)

• 4 clock/data channels

• 256 K to 64 M memory depth per channel (depends upon option chosen)

• 500 Mb/s maximum state data rate (with Option 500)

• 1 GHz, 128 M deep timing analysis on half channels

• “Eye Finder” feature

• 4 GHz timing zoom with 64 k memory depth

• Expandable to 340 channels (16911A) or 510 channels (16910A) on a single clock

Service Strategy

The service strategy for this instrument is the replacement of defective

assemblies. This service guide contains information for finding a defective

assembly by testing and servicing the 16910/11A state and timing analyzer

module.

The modules can be returned to Agilent Technologies for all service work,

including troubleshooting. Contact your nearest Agilent Technologies Sales

Office for more details.

Application

This service guide applies to a 16910A or 16911A module installed in the 16900-

series logic analysis system mainframes.

Chapter :

The 16910A Logic Analyzer

The 16911A Logic Analyzer

In This Book

This book is the service guide for the 16910A and 16911A logic analyzer modules.

This service guide has eight chapters.

Chapter 1, “General Information,” beginning on page 9 contains information

about the module and includes accessories for the module, specifications and

characteristics of the module, and a list of the equipment required for servicing

the module.

Chapter 2, “Preparing for Use,” beginning on page 15 tells how to inspect and

prepare the module for use.

Chapter 3, “Testing Logic Analyzer Performance,” beginning on page 19 gives

instructions on how to test the performance of the module.

Chapter 4, “Calibrating,” beginning on page 61 contains calibration instructions

for the module (if required).

Chapter 5, “Troubleshooting,” beginning on page 63 contains flowcharts for

troubleshooting the module and an explanations of the self-tests.

Chapter 6, “Replacing Assemblies,” beginning on page 83 explains how to replace

the module and assemblies of the module and how to return them to Agilent

Technologies.

Chapter 7, “Replaceable Parts,” beginning on page 89 lists replaceable parts,

shows an exploded view, and gives ordering information.

Chapter 8, “Theory of Operation,” beginning on page 97 explains how the logic

analyzer works.

Contents

1 General Information

Accessories 10

Mainframe and Operating System 10

Specifications 11

Environmental Characteristics 12

Recommended Test Equipment 13

2 Preparing for Use

Power Requirements 16

Operating Environment 16

Storage 16

To inspect the module 16

To configure and install the module 17

To test the module 17

To clean the module 17

3 Testing Logic Analyzer Performance

To Assemble the SMA/Flying Lead Test Connectors 22

To Test the Minimum Master to Master Clock Time and Minimum Eye Width 27

Equipment Required 28

Prepare the Logic Analysis System for Testing 29

Perform System Self-Tests 30

Set Up the Test Equipment 31

Connect the Test Equipment 33

Verify and adjust 8133A pulse generator DC offset 36

Deskew the oscilloscope 37

Set the 8133A pulse width 39

Configure the Logic Analysis System 40

Adjust the sample positions using Eye Finder 44

Contents

Test Pod 1 in 250 Mb/s Mode 47

Determine PASS/FAIL (1 of 2 tests) 47

Close the Eye Finder and Analyzer Setup Windows 47

Configure the markers 47

Determine PASS/FAIL (2 of 2 tests) 49

Test the complement of the bits (250 Mb/s mode) 50

Test Pod 2 in 250 Mb/s Mode 52

Test the complement of the bits (Pod 2, 250 Mb/s mode) 53

Test the Remaining Pods in 250 Mb/s Mode 54

Test Pod 1 in 500 Mb/s Mode 54

Determine and set Eye Finder Position (500 Mb/s mode) 55

Test the complement of the bits (Pod 1, 500 Mb/s mode) 57

Test Pod 2 in 500 Mb/s Mode 57

Test the complement of the bits (Pod 2, 500 Mb/s mode) 58

Test Pods 3 and 4 in 500 Mb/s Mode (16910A only) 59

Conclude the State Mode Tests 59

Performance Test Record 60

4 Calibrating

Calibration Strategy 62

5 Troubleshooting

To use the flowcharts 64

To run the self tests 67

Self-Test Descriptions 67

To exit the test system 70

To Assemble the 2 x 9 Test Connectors 71

To test the cables 73

Set up the test equipment 73

Connect the test equipment 74

Configure the logic analyzer to test Pod 1 74

Adjust sampling positions using Eye Finder 78

Connect and configure the logic analyzer to test other pods 80

Contents

6 Replacing Assemblies

Tools Required 84

To remove the module 84

To remove the logic analyzer cable 85

To install the logic analyzer cable 86

To replace the circuit board 87

To return assemblies 88

7ReplaceableParts

Ordering Replaceable Parts 90

Replaceable Parts List 91

16910A Exploded View 94

16911A Exploded View 95

8 Theory of Operation

Block-Level Theory 98

Index

Contents

General Information

This chapter lists the accessories, some of the specifications and characteristics,

and the recommended test equipment.

Chapter 1: General Information

Accessories

One or more of the following accessories, sold separately, are required to operate

the 16910/11A logic analyzers.

Mainframe and Operating System

The 16910/11A logic analyzers require an Agilent Technologies 16900-series logic

analysis system (mainframe). The 16910/11A logic analyzers (module) will work

with any version of the 16900-series logic analysis system operating system.

Accessories Agilent Part Number

Flying Lead Probe Set E5383A

17-Pin Single-Ended Soft Touch Probe E5396A

34-Pin Single-Ended Soft Touch Probe E5394A

100-Pin Single-Ended Probe (Samtec) E5385A

38-Pin Single-Ended Probe (MICTOR) E5346A

Single-Ended Low Voltage Probe (MICTOR) E5339A

Single-Ended Probe, No Isolation Networks (MICTOR) E5351A

Autres manuels pour 16900 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Agilent Technologies Instrument de mesure

Agilent Technologies

Agilent Technologies 11980A Manuel d'utilisation

Agilent Technologies

Agilent Technologies PSA Series Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies E8362B Manuel utilisateur

Agilent Technologies

Agilent Technologies E5061B Manuel utilisateur

Agilent Technologies

Agilent Technologies 86142B Manuel utilisateur

Agilent Technologies

Agilent Technologies FieldFox N9923A Manuel utilisateur

Agilent Technologies

Agilent Technologies 53147A Manuel utilisateur

Agilent Technologies

Agilent Technologies E5052A Manuel

Agilent Technologies

Agilent Technologies 4263B Manuel utilisateur

Agilent Technologies

Agilent Technologies ACQIRIS DC122 Manuel utilisateur

Agilent Technologies

Agilent Technologies E8363A Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies E444xAU Option H37 Manuel utilisateur

Agilent Technologies

Agilent Technologies L4400 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies u8903a Manuel utilisateur

Agilent Technologies

Agilent Technologies 4263B Manuel utilisateur

Agilent Technologies

Agilent Technologies PNA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies U1701B Manuel

Agilent Technologies

Agilent Technologies 8960 Manuel utilisateur

Agilent Technologies

Agilent Technologies NFA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies G6600 Mode d’emploi

Agilent Technologies

Agilent Technologies N3970A Manuel d'utilisation

Agilent Technologies

Agilent Technologies ESA-E Series Manuel du propriétaire

Agilent Technologies

Agilent Technologies 5185-5991 Manuel utilisateur

Agilent Technologies

Agilent Technologies 85032B/E 50 Manuel

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur