Agilent Technologies 11713B Manuel de service

Agilent Technologies

Agilent 11713B/C

Attenuator/Switch

Drivers

Operating and Service

Manual

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Agi-

lent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

11713-90024

Edition

First edition, October 2007

Printed in Malaysia

Agilent Technologies, Inc.

Phase 3 Bayan Lepas Free Industrial Zone

Penang, 11900 Malaysia

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S. Gov-

ernment will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Govern-

ment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and met.

Certification

Agilent Technologies certifies that this

product met its published specifications at

the time of shipment from the factory. Agi-

lent Technologies further certifies that its

calibration measurements are traceable to

the United States National Institute of

Standards and Technology (NIST, formerly

NBS), to the extend allowed by the Insti-

tute’s calibration facility, and to the calibra-

tion facilitiesof the other International

Standards Organization members.

11713B/C Operating and Service Manual 3

General Safety Information

The following general safety precautions must be observed during all phases of operation of this instru-

ment. Failure to comply with these precautions or with specific warnings elsewhere in this manual vio-

lates safety standards of design, manufacture, and intended use of the instrument. Agilent

Technologies, Inc. assumes no liability for the customer’s failure to comply with these regulations.

Before applying power

Verify that all safety precautions are taken. Make all connections to the unit before applying power.

Gound the instrument

This product is provided with protective earth terminals. To minimize shock hazard, the instrument must

be connected to the ac power mains through a grounded power cable, with the ground wire firmly con-

nected to an electrical ground (safety ground) at the power outlet. Any interruption of the protective

(grounding) conductor or disconnection of the protective earth terminal will cause a potential shock

hazard that could result in personal injury.

DO NOT operate the product in an explosive atmosphere or in the presence

of flammable gases or fumes

DO NOT use repaire fuses or short-circuited fuse holders

For continued protection against fire, repalce the line fuse(s) only with fuse(s) of the same voltage and

current rating and type.

Do Not Remove the Instrument Cover

Only qualified, service-trained personnel who are aware of the hazards involved should remove the

instrument covers. Always disconnect the power cable and any external circuits before removing the

instrument cover.

Do Not Modify the Instrument

Do not install substiture parts or perform any unauthorized modification to the instrument. Return the

instrument to an Agilent Sales and Service Office for service and repair to ensure that safety features

are maintained.

In Case of Damage

Instruments that appear damaged or defective should be made inoperative and secured against unin-

tended operation until they can be repaired by qualified, service-trained personnel.

NOTE The 11713B/C complies with INSTALLATION CATEGORY II as well as POLUTION DEGREE 2 in

IEC61010-1. The 11713B/C is an INDOOR USE product.

4 11713B/C Operating and Service Manual

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

This product complies with the WEEE Directive (2002/96/EC)

marking requirements. The affixed label indicates that you must not

discard this electrical/electronic product in domestic household

waste.

Product Category:

With reference to the equipment types in the WEEE Directive Annex

1, this product is classed as a “Monitoring and Control

Instrumentation” product.

The affixed product label is shown as below:

Do not dispose in domestic household waste.

To return unwanted products, contact your local Agilent office, or

visit:

www.agilent.com/environment/product

for more information.

11713B/C Operating and Service Manual 5

Safety Symbols

The following symbols on the instrument aand in the documentation

indicate precautions that must be taken to maintain safe operation of

the instrument.

Alternating current

Earth (grounding) terminal

Off (supply)

On (supply)

Caution, risk of danger (refer to this manual for specific

Warning or Caution information)

6 11713B/C Operating and Service Manual

Contacting Agilent

For more information, please contact your nearest Agilent office.

Or, go to www.agilent.com/find/assist for more information.

Americas

Canada

Latin America

United States

(877) 894-4414

305 269 7500

(800) 829-4444

Asia Pacific

Australia

China

Hong Kong

India

Japan

Korea

Malaysia

Singapore

Taiwan

Thailand

1 800 629 485

800 810 0189

800 938 693

1 800 112 929

81 426 56 7832

080 769 0800

1 800 888 848

1 800 375 8100

0800 047 866

1 800 226 008

Europe

Austria

Belgium

Denmark

Finland

France

Germany

Ireland

Italy

Netherlands

Spain

Sweden

Switzerland(French)

Switzerland(German)

United Kingdom

Other European Countries:

0820 87 44 11

32 (0) 2 404 93 40

45 70 13 15 15

358 (0) 10 855 2100

0825 010 700

01805 24 6333

1890 924 204

39 02 92 60 8484

31 (0) 20 547 2111

34 (91) 631 3300

0200-88 22 55

41 (21) 8113811 (Opt 2)

0800 80 53 53 (Opt 1)

44 (0) 118 9276201

www.agilent.com/find/contactus

11713B/C Operating and Service Manual 7

Contents

1 Introduction

Key Features of Agilent 11713B/C Attenuator/Switch Drivers 14

Table 1. Key Features of 11713B/11713C 14

Compatible Agilent Attenuators and Switches 15

Table 2. Compatible Agilent Switches 15

Table 3. Compatible Agilent Attenuators 15

Connecting Accessories 16

Table 4. Connecting Accessories for Agilent 11713B/11713C 16

11713B Front and Rear Panels at a Glance 17

Figure 1. 11713B Front Panel Features 17

Figure 2. 11713B Rear Panel Features 19

11713C Front and Rear Panels at a Glance 20

Figure 3. 11713C Front Panel Features 20

Figure 4. 11713C Rear Panel Features 22

2 Installation

Initial Inspection 26

Preparing for Use 27

Bench Operation 27

Figure 5. Handle Positioning for Bench Operation 27

Rack Mounting One Instrument (Option 908) 28

Figure 6. Illustrations of steps 2 and 3 28

Rack Mounting Two Instruments (Option 909) 29

Figure 7. Illustration of completed setup 29

Connecting to Agilent Attenuators and Switches 30

Table 5. Summary of switches and attenuators connections to

11713B/C 30

Table 6. 11713CB/C Front Panel and Back Panel Properties 32

Driving Four-Section Attenuators and Switches 33

Figure 8. Typical connection for a programmable four-section

attenuator 33

Driving Additional Coaxial Switches 34

8 11713B/C Operating and Service Manual

Figure 9. Typical connection for 8762 and 8765 series coaxial

switches 34

Figure 10. Typical connection for 8761 series coaxial switches 35

Driving Relays 36

Figure 11. Typical connection for relay driving circuit 36

3 Specifications

General Specifications 38

Drive Power Supply Specifications 38

Table 7. 11713B/C Drive Power Supply Specifications 38

Supplement Characteristics 38

Table 8. 11713B/C Supplemental Characteristics 38

Physical Specifications 39

Remote Programming Characteristics 39

Environmental Specifications 40

Table 9. 11713B/C Environmental Specifications 40

Safety and Regulatory Information 41

Safety Considerations 41

Compliance With Electromagnetic Compatibility (EMC) 41

Compliance With German Noise Requirement 41

Regularity Markings 42

Declaration of Conformity 43

4 Verification

Operator’s Check for Local Operation 46

Recommended Test Equipment 46

Table 10. Recommended Test Equipment 46

Procedure 47

Figure 12. Switching System for Verification 47

Operator’s Check for Remote Operation 48

5 Local Operations

Getting Started with 11713B/C 50

Step One: Turn on 11713B/C 50

Step Two: Configure 11713B/C settings to drive attenuators and

switches 51

Step Three: Configure 11713B/C connections to attenuators and

switches 55

Table 11. Connection between 11713B/C and programmable

attenuators 55

Table 12. Connection between 11713B/C and switches 55

11713B/C Operating and Service Manual 9

Main Menu of 11713B/C 56

SYSTEM Menu 56

ATTEN Menu 57

CYCLE Menu 58

IO Menu 59

INFO Menu 59

UTILITY Menu 60

Preset Menu 61

Save/Recall State Menu 62

List of Default Values 63

6 Remote Operations

Configuring Remote Interface 66

Interface Selection 66

GPIB Configuration 66

USB Configuration 67

LAN Configuration 67

Programming Guide (SCPI) 68

SCPI Command Syntax 68

Rules for Using a Channel or Scan List 68

Commands Relevant to Attenuators 69

Commands Relevant to Switches 71

Programming Guide (Legacy) 73

Data Message Input Format 73

SCPI and Legacy Commands Compatibility 74

7 Remote Interface Configurations

Connecting the 11713B/C to Your Computer 76

Connecting Over GPIB 76

Connecting Over USB 78

Connecting Over LAN 79

Exploring the 11713B/C Web Interface Over LAN 85

Launching the Web Interface 85

Figure 13. 11713B/C Web Interface’s Welcome Window 86

Navigation Bar 86

Displaying the Browser Web Control Page 87

Figure 14. 11713B/C Brower Web Control Interface 87

8 Replacing Major Assemblies

Replaceable Parts 90

10 11713B/C Operating and Service Manual

Table 13. Major Assemblies Reference Designator and Part

Number 90

Table 14. Front Panel Module Reference Designator and Part

Number 90

Table 15. Rear Panel Module Reference Designator and Part

Number 91

Table 16. PPMC PCA Module Reference Designator and Part

Number 91

Table 17. Fan Module Reference Designator and Part Number 92

Table 19. Power Supply Module Reference Designator and Part

Number 93

Table 18. Motherboard Reference Designator and Part Number 93

Top Module Cover Removal/Replacement 94

To R e m o v e To p Mo d u l e C o ve r 94

To Replace Top Module Cover 94

Front Panel Module Removal/Replacement 95

To Remove Front Panel Module 95

To Replace Front Panel Module 96

Rear Panel Module Removal/Replacement 97

To Remove Rear Panel Module 97

To Replace Rear Panel Module 98

PPMC PCA Removal/Replacement 99

To Remove PPMC PCA 99

To Replace PPMC PCA 99

Fan Module Removal/Replacement 100

To Re mov e F an M od ul e 100

To Replace Fan module 100

Motherboard Removal/Replacement 101

To Remove Motherboard 101

To Replace Motherboard 102

Power Supply Module Removal/Replacement 103

To Remove Power Supply Module 103

To Replace Power Supply Module 103

9 Servicing the Attenuator/Switch Driver

Preparing a Static-Safe Workstation 106

Reducing ESD Damage 107

Maintainance and Adjustments 108

Fuse Removal/Replacement 108

Adjustment 108

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Agilent Technologies Unité de contrôle

Agilent Technologies

Agilent Technologies 81650A Manuel utilisateur

Agilent Technologies

Agilent Technologies 83400 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies N3307A Manuel du propriétaire

Agilent Technologies

Agilent Technologies Turbo-V Manuel utilisateur

Agilent Technologies

Agilent Technologies VXI 75000 C Series Manuel utilisateur

Agilent Technologies

Agilent Technologies G1360A Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies E8482A Manuel utilisateur

Agilent Technologies

Agilent Technologies 4890 Manuel utilisateur

Agilent Technologies

Agilent Technologies NW16 Manuel utilisateur

Agilent Technologies

Agilent Technologies 8495D Manuel de service

Agilent Technologies

Agilent Technologies 34946A Manuel utilisateur

Agilent Technologies

Agilent Technologies TwisTorr 305 FS Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 83481A Manuel utilisateur

Agilent Technologies

Agilent Technologies 81630B Manuel utilisateur

Agilent Technologies

Agilent Technologies LC Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 81610A Manuel utilisateur

Agilent Technologies

Agilent Technologies 83487A Manuel utilisateur

Agilent Technologies

Agilent Technologies N2757A Manuel utilisateur

Agilent Technologies

Agilent Technologies 70341A Manuel utilisateur

Agilent Technologies

Agilent Technologies VPI Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 81662A Manuel utilisateur

Agilent Technologies

Agilent Technologies E1476A Manuel utilisateur

Agilent Technologies

Agilent Technologies G1323B Manuel utilisateur

Agilent Technologies

Agilent Technologies E1339A Manuel du propriétaire

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur