1051B User Manual 1
➢Overview
Thank you for purchasing the 990A all-in-one touch POS terminal, AGT is committed to
continuously improve product quality and provide better after-sales service. In order to take full
advantage of our devices, we strongly recommend that you take the time to read this manual
before going into software installation.
Note: Information in this manual may change without prior notice.
1. Safety Information
1.1 Before plug in the product, please make sure the power you provide meets the
power requirements (such as voltage, frequency); Make sure the ground terminal of
the power outlet is working properly.
1.2 Lightning may damage this product. During lightning storms, unplug the network
cable, power cable and any other connections.
1.3 Turn off power before connecting any devices (except USB devices) to the terminal.
1.4 Do not attempt to open the chassis. You may be hurt by electric shock. For service,
call your place of purchase.
1.5 Do not spill liquid on the terminal. Do not place any objects into the ventilation
holes of this product. It may cause short-circuit of the internal components and
cause a fire or electric shock.
1.6 After the computer is stored below temperature of 10 °C, please place the machine
in room temperature (10 - 35 °C) in the original packing for at least two hours to
allow the terminal to restore to room temperature before operation. This is to avoid
condensation that might bring electrical damage.
1.7 Keep the terminal clean, dry, and away from dust, moisture and direct sunlight.
1.8 Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen.
Wipe it clean with a soft terry cloth applied with a mild solution
1.9 Do not share the same power outlet with high power electrical appliances keep
distance from high level magnetic interference.
1.10 Do not use the sharp pointed objects to work with the touch screen to avoid damage
to the screen.
When the following occurs:
1. Liquid gets inside the POS terminal;
2. Accidental physical damage;
3. POS terminal produces a burning smell;
Immediately disconnect the power supply, unplug the power cord, and contact a qualified
service technician.
