Aewin AW-E652 Manuel utilisateur

VIA C3 Low Power Processors Embedded SBC

User’s Manual

Version 1.4

Manual edition 1.4, Nov.2005

This document contains proprietary information protected by copyright. All rights

are reserved, no part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without prior written permission of the

manufacturer.

The content of this manual is intended to be accurate and reliable, the original

manufacturer assumes no responsibility for any inaccuracies that may be contained in

this manual. The original manufacturer reserves the right to make improvements to

the products described in this manual at any time without prior notice.

Trademarks

IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International

Business Machine Corporation

Award is a trademark of Award Software International, Inc

RTL is a trademark of Realtek Semi-Conductor Co., Ltd

VIA is a trademark of VIA Technologies, Inc

Winbond is a trademark of Winbond Technology, Inc

CF and CompactFlash are trademark of ScanDisk Corporation

Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered

trademarks of Microsoft Corporation

All other product names mentioned herein are used for identification purpose only and

may be trademarks and/or registered trademarks of their respective companies

Limitation of Liability

While reasonable efforts have been made to ensure the accuracy of this manual, the

manufacturer and distributor assume no liability resulting from errors or omissions in

this manual, or from the use of the information contained herein.

Table of Contents

Chapter 1. General Information

1.1 Introduction---------------------------------------------------------------------------------1

1.2 Specification---------------------------------------------------------------------------------1

1.3 AW-E652 Package--------------------------------------------------------------------------3

1.4 Board Layout--------------------------------------------------------------------------------4

1.5 Board Dimension---------------------------------------------------------------------------4

Chapter 2. Connectors Location and Configuration

2.1 Connectors/Jumpers Location and Define--------------------------------------------5

2.2 Onboard Processors-----------------------------------------------------------------------6

2.3 Installing System Memory----------------------------------------------------------------6

2.4 Connector and Jumpers Settings-------------------------------------------------------7

CN1: VGA D-Sub Connector------------------------------------------------------------7

CN2: COM1 D-Sub Connector---------------------------------------------------------8

CN3: PS/2 Mouse/KB Connector-------------------------------------------------------8

CN4: IR Connector------------------------------------------------------------------------9

CN5: LAN RJ-45 Connector------------------------------------------------------------9

CN6: USB Connector--------------------------------------------------------------------10

CN7: Internal Mouse/KB Pin-Header------------------------------------------------10

CN8: LVDS Connector-------------------------------------------------------------------11

CN9: COM2 Pin-Header----------------------------------------------------------------11

CN10: PCI Interface---------------------------------------------------------------------12

CN11: LPT Pin-Header------------------------------------------------------------------13

CN12: PC/104 Connector---------------------------------------------------------------14

CN13: Power Button---------------------------------------------------------------------15

CN14: GPIO Port Connector----------------------------------------------------------15

CN15: IDE Connector-------------------------------------------------------------------16

CN16: LCD Backlight Connector-----------------------------------------------------17

CN17: Floppy Connector---------------------------------------------------------------17

CN18: USB3/4 Pin-Header-------------------------------------------------------------18

CN19: ATX Power Connector---------------------------------------------------------18

CN20: AC97 Connector-----------------------------------------------------------------18

CN21: +5V/+12 Input Connector-----------------------------------------------------19

CN22: COM3/COM4 Pin-Header----------------------------------------------------19

CN23: LCD Display----------------------------------------------------------------------20

JP1: COM1 RI/Voltage Select----------------------------------------------------------21

JP2: COM2 Mode Select----------------------------------------------------------------21

iii

JP3: Clear CMOS-----------------------------------------------------------------------22

JP4: Watchdog Output Select--------------------------------------------------------22

JP5: COM2 RI/Voltage Select--------------------------------------------------------22

JP6: COM4 RI/Voltage Select--------------------------------------------------------23

JP7: COM3 RI/Voltage Select--------------------------------------------------------23

JP8: LCD Voltage Select---------------------------------------------------------------24

JP9: COM2 RS485 Wire Select---------------------------------------------------24

Chapter 3. BIOS Setup-----------------------------------------------------------------------25

3.1 Quick Setup--------------------------------------------------------------------------------25

3.2 Entering the CMOS Setup Program--------------------------------------------------26

3.3 Menu Options------------------------------------------------------------------------------27

Standard CMOS Features--------------------------------------------------------------29

Advanced BIOS Features---------------------------------------------------------------31

Advanced Chipset Features-------------------------------------------------------------34

Integrated Peripherals-------------------------------------------------------------------37

Power Management Setup--------------------------------------------------------------41

PNP/PCI Configuration-----------------------------------------------------------------43

PC Health Status--------------------------------------------------------------------------44

Frequency/Voltage Control-------------------------------------------------------------45

Load Fail-Safe Default-------------------------------------------------------------------45

Load Optimized Default-----------------------------------------------------------------46

Set Supervisor & User Password------------------------------------------------------46

Save & Exit Setup-------------------------------------------------------------------------47

Save Without Saving---------------------------------------------------------------------48

Chapter 4. Drivers and Utilities Installation---------------------------------------------49

System Driver Installation------------------------------------------------------------------49

Audio Driver Installation--------------------------------------------------------------------54

VGA Driver Installation---------------------------------------------------------------------56

Ethernet Driver Installation ----------------------------------------------------------------58

Appendix A. Programming the Watchdog Timer--------------------------------------65

Appendix B. Audio Kit-----------------------------------------------------------------------66

Appendix C. Installing PC/104 Module--------------------------------------------------69

Appendix D. Programming the GPIO Port----------------------------------------------69

Appendix E. Interrupt Controller---------------------------------------------------------70

Appendix F. Optional Cable List----------------------------------------------------------73

User’s manual

AW-E652

Chapter 1. General Information

1.1 Introduction

The AW-E652 is a full function of 3.5” Embedded format SBC board use VIA

VT8606 and VT82C686B chipset supports processors VIA Ezra/Eden (EBGA

packaging) processors. The AW-E652 supports CRT and 36-bit TFT panels, Realtek

RTL8139C+ Ethernet chipset with RJ45 jack for 10/100Mbps and AC-97 Audio

Interface.

The onboard features include three RS-232 and one RS-232/422/485 serial ports, one

bi-directional parallel port and onboard SSD interface supports 50-pin CompactFlash

socket for TypeI/II CompactFlash Card. The AW-E652 supports up to 4 USB

included two USB ports and pin-header for USB3/4, 8 Digital Input/8 Output as well

as the Watchdog timer. For the expansion ability, the AW-E652 reserved a PC/104

connector and proprietary PCI connector onboard.

1.2 Specification

CPU VIA Ezra/Eden (EBGA package) processor

BIOS Award® 256KB Flash BIOS

Chipset VIAVT8606 + VT82C686B

I/O Chipset Built-in VT82C686B + Winbond 83977EF

Memory One 144-pin SO-DIMM socket support up to

512Mbytes SDRAM

Enhanced IDE Support up to two IDE devices (Ultra DMA

33/66/100).

FDD interface Support 34-pin header up to two floppy disk drives

Parallel port One bi-directional parallel port. Support

SPP/ECP/EPP

Serial port Three RS-232 and one RS-232/422/485 serial ports.

IR interface Support one IrDATx/Rx header

KB/Mouse connector Support PC/AT keyboard and PS/2 mouse

USB connectors Support four USB ports

Battery Lithium battery for data retention up to 10 years(in

normal condition)

Watchdog Timer Can generate a system reset, or IRQ11. Support

software selectable timeout interval.

User’s manual

AW-E652

Digital I/O Eight digital output and eight input

PCI Connector Optional proprietary PCI connector for PCI

expansion

PC/104 Connector One PC/104 connector

Power management APM 1.1 compliant

Flat Panel/CRT Interface

Chipset VIATwister chip with integrated Savage4

2D/3D/Video Accelerator

Display memory Share system memory 8/16/32MB

Interface

4x AGPVGA/LCD interface, support for 9, 12, 15,

18, 24, 36 bit TFT and optional 16 or 24-bit DSTN

Panel

Display type Support CRT, 36bit TTLTFT LCD and LVDS

interface

Ethernet Interface

Chipset Realtek RTL8139C+ 100Base-TX Fast Ethernet

controller

Ethernet interface PCI 100/10 Mbps Ethernet controller

SSD Interface One 50-pin CompactFlash™ socket

Sound Interface (Optional via Audio Kit)

Chipset Option AC 97 codec

Audio controller SoundBlaster Pro Hardware and Direct Sound

Ready AC97 Digital Audio

Audio interface Mic in,, Line in, Speaker out and CD audio in

Mechanical and Environmental

Power supply voltage VCC (4.75V to 5.25V)

Max. power requirements 4A @ 5 V, 200mA/+12V

Operating temperature 32 to 140°F (0 to 60°C)

Board size 5.7"(L) x 4"(W) (145mm x 102mm)

Weight 0.26 lb. (0.57 Kg) (bare)

1.3 AW-E652 Package

Please make sure that the following items have been included in the

package before installation.

1. AW-E652 VIA C3 Single Board

User’s manual

AW-E652

2. Quick Setup

3. Cable: Please refer to Appendix F Optional Cables

4. CD-ROM which contains the following folders:

(1) Manual

(2) LAN Driver

(3) Tools

(4) Chipset Driver

(5) VGA Driver

(6) Sound Driver

If any of these items are missing or damaged, please contact your dealer

from whom you purchased the board at once. Save the shipping

materials and carton in the event that you want to ship or store the board

in the future. After you unpack the board, inspect it to assure an intact

shipment. Do not apply power to the board if it appears to have been

damaged.

Leave the board in its original packing until you are ready to install

Precautions

Please make sure you properly ground yourself before handling the AW-E652 board

or other system components. Electrostatic discharge can be easily damage the

AW-E652 board.

Do not remove the anti-static packing until you are ready to install the AW-E652

board.

Ground yourself before removing any system component from it protective anti-static

packaging. To ground yourself, grasp the expansion slot covers or other unpainted

parts of the computer chassis.

Handle the AW-E652 board by its edges and avoid touching its component.

1.4 Board Layout

User’s manual

AW-E652

1.5 Board Dimension

Chapter 2. Connectors/Jumpers Location and Configuration

User’s manual

AW-E652

2.1 Connectors/Jumpers Location and Define

CN1 CN2CN3CN5CN6

CN7

CN23CN20CN22 CN21

CN18

CN19

CN9

CN15

CN11

CN12

CN8

CN14

CN16

CN4

CN10

CN13

CN17

JP2

JP5

JP9

JP1

JP4

JP8

JP3

JP6 JP7

Table des matières

Autres manuels Aewin Carte mère

Aewin

Aewin MB-8390 Manuel utilisateur

Aewin

Aewin MB-8303A Manuel utilisateur

Aewin

Aewin AW-MB700 Manuel utilisateur

Aewin

Aewin AW-BS 710 Manuel utilisateur

Aewin

Aewin MB-8301A-Q24 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur