AEMC SL261 Manuel utilisateur

AC/DC CURRENT

OSCILLOSCOPE PROBE

SL261

ENGLISH User Manual

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

certiﬁes that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met its published speciﬁcations.

An NIST traceable certiﬁcate may be

requested at the time of purchase, or obtained

by returning the instrument to our repair and

calibration facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer. For recalibration, please

use our calibration services. Refer to our repair

and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 1201.51

Model #: SL261

Please ﬁll in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due: _______________________

INSTRUMENTS

Chauvin Arnoux®, Inc.

d.b.a AEMC®Instruments

www.aemc.com

Table of Contents

1. INTRODUCTION............................................................................... 2

1.1 International Electrical Symbols................................................3

1.2 DenitionofMeasurementCategories .....................................3

1.3 ReceivingYourShipment..........................................................3

1.4 OrderingInformation.................................................................4

1.4.1 AccessoriesandReplacementParts............................4

2. PRODUCT FEATURES ...................................................................... 5

2.1 Description................................................................................5

2.2 Compatibility .............................................................................5

2.3 Features....................................................................................6

3. SPECIFICATIONS............................................................................. 7

3.1 ElectricalSpecications ............................................................7

3.2 MechanicalSpecications ........................................................8

3.3 EnvironmentalSpecications....................................................9

3.4 SafetySpecications ................................................................9

3.5 TypicalResponseCurves .......................................................10

4. OPERATION .................................................................................. 12

4.1 ZeroAdjustment......................................................................12

4.2 CurrentMeasurement.............................................................12

4.3 Battery Indication (Green LED)...............................................13

4.4 Peak Overload (OL) Indication (Red LED) .............................13

5. MAINTENANCE ............................................................................. 14

5.1 Maintenance ...........................................................................14

5.2 Cleaning..................................................................................14

5.3 ReplacingtheBatteries...........................................................15

RepairandCalibration...........................................................................16

TechnicalandSalesAssistance ............................................................16

Limited Warranty ...................................................................................17

WarrantyRepairs...................................................................................17

AC/DC Current Oscilloscope Probe Model SL261

CHAPTER 1

INTRODUCTION

WARNING

The safety warnings are provided to ensure the safety of

personnel and proper operation of the instrument. Read the

instruction completely.

• Usecautiononanycircuit:potentiallyhighvoltagesandcurrents

maybepresentandmayposeashockhazard.

• Donotusetheprobeifdamaged.Alwaysconnectthecurrent

probetothemeasuringdevicebeforeitisconnectedaroundthe

conductor

• Donotuseonnoninsulatedconductorwithapotentialtoground

greaterthan600VCATIIIpollution2.Useextremecautionwhen

clampingaroundbareconductorsorbusbars.

• Beforeeachuse,inspecttheprobe;lookforcracksinhousingor

outputcableinsulation.

• Donotuseclampinwetenvironmentorinlocationsthathazard-

ousgasesexist.

• Donotusetheprobeanywherebeyondthetactilebarrier.

AC/DC Current Oscilloscope Probe Model SL261

1.1 International Electrical Symbols

This symbol signiﬁes that the instrument is protected by double or rein-

forced insulation.

This symbol on the instrument indicates a WARNING and that the operator

must refer to the user manual for instructions before operating the

instrument. In this manual, the symbol preceding instructions indicates that

if the instructions are not followed, bodily injury, installation/sample and

product damage may result.

Risk of electric shock. The voltage at the parts marked with this symbol may

be dangerous.

This symbol refers to a type A current sensor. This symbol signiﬁes that

application around and removal from HAZARDOUS LIVE conductors is per-

mitted.

Probe ﬁtted with an electronic output limiter providing protection against

voltage surges caused by the accidental opening of the probe secondary

circuit to 30V max. peak.

In conformity with WEEE 2002/96/EC.

1.2 Deﬁnition of Measurement Categories

CAT II: For measurements performed on circuits directly connected to

the electrical distribution system. Examples are measurements

onhouseholdappliancesorportabletools.

CAT III: For measurements performed in the building installation at

the distribution level such as on hardwired equipment in xed

installationandcircuitbreakers.

CAT IV: For measurements performed at the primary electrical supply

(<1000V) such as on primary overcurrent protection devices,

ripplecontrolunits,ormeters.

1.3 Receiving Your Shipment

Uponreceivingyourshipment,makesurethatthecontentsareconsistent

with the packing list. Notify your distributor of any missing items. If the

equipmentappearstobedamaged,leaclaimimmediatelywiththecar-

rierandnotifyyourdistributoratonce,givingadetaileddescriptionofany

damage.Savethedamagedpackingcontainertosubstantiateyourclaim.

AC/DC Current Oscilloscope Probe Model SL261

1.4 Ordering Information

AC/DCCurrentProbeModelSL261

(10A-100mV/A,100A-10mV/A,BNC).................................. Cat. #1201.51

Includes a user manual.

1.4.1 Accessories and Replacement Parts

Adapter-BNCAdapterforusewithAC/DCCurrentProbe

ModelSL261&Meters8220,8333,8335&8336 .............. Cat. #2140.40

AC/DC Current Oscilloscope Probe Model SL261

CHAPTER 2

PRODUCT FEATURES

2.1 Description

The SL261 AC/DC Current Oscilloscope Probe expands oscilloscope

applicationsinindustrial,automotiveorpowerenvironments,andisideal

for analysis and measurement of distorted current waveforms and har-

monics.Theprobepermitsaccuratedisplayandmeasurementofcurrents

from100mAto100Arms,DCto100kHzwithoutbreakingintothecircuit.

TheprobeusesHalle󰀨ecttechnologytomeasureACandDCsignals.The

probeconnectsdirectlytoanoscilloscopethrougha2metercoaxialcable

withaninsulatedBNC.

2.2 Compatibility

TheModelSL261iscompatiblewithanyanalogordigitaloscilloscopeor

othervoltage-measuringinstrumentwhichhasthefollowingfeatures:

• BNCinputconnector

• Rangecapableofdisplaying0.2to0.5Vperdivision

• Minimuminputimpedanceof1MΩ

AC/DC Current Oscilloscope Probe Model SL261

2.3 Features

ZERO

OFF

Battery

Compartment

Screw

Range Selection Switch

Power Indication LED

Zero Adjust Knob

Current Flow for DC Measurements

or Supply to Load for AC Measurements

Battery

Compartment Cover

Ø = 0.46"

(11.8 mm

)

Peak Overload

Indication LED

Keep hands below

this point

100 mV/A

10 mV/A

WARNING: Always keep hand on the handle part of the probe.

AC/DC Current Oscilloscope Probe Model SL261

CHAPTER 3

SPECIFICATIONS

3.1 Electrical Speciﬁcations

*Referenceconditions:23°C±5°C,20to75%RH,DCto1kHz,probezeroed,1minute

warmup,batteriesat9V±0.1V,externalmagneticeld<40A/m,noDCcomponent,no

externalcurrentcarryingconductor,1MΩ/100pFload,conductorcenteredinjaw.

Current Range:

100mV/A:100mAto10Apeak

10mV/A:1to100Apeak

Output Signal:1000mVpeakmax

AC Current Accuracy:

Aftercalibrationandforoneyear

(zeroprobebeforemakingmeasurement)

Range Accuracy Phase Shift

100mV/A

(50mA to 10ADC/ACpeak) ±3%ofreading±50mA <1.5°fromDCto65Hz

10mV/A

(500mA to 40ADC/ACpeak) ±4%ofreading±50mA

<1°fromDCto65Hz

10mV/A

(40A to 80ADC/ACpeak) 12%ofreading±50mA

10mV/A

(80A to 100ADC/ACpeak) 15%ofreading

Frequency Range: DCto100kHz(-3dBwithcurrentderating)

Noise:

Range10mV/A:480µV

Range100mV/A:3mV

Slew Rate:

Range10mV/A:20mV/µs

Range100mV/A:0.3V/µs

Load Impedance: >1MΩ/100pF

AC/DC Current Oscilloscope Probe Model SL261

Insertion Impedance (50/60 Hz): 100mV/A:3µs

 10mV/A:0.01Ω

Rise or Fall Time:Range100mV/A:3µs

 Range10mV/A:4µs

Working Voltage: 600Vrmsmax

Common Mode Voltage: 600Vrmsmax

Inuence of Adjacent Conductor: < 0.2mA/A AC

Inuence of Conductor Position in Jaw: 0.5%ofreadingatkHz

Battery: 9Valkaline(NEDA1604A,IEC6LR61)

Low Battery: GreenLEDwhen≥6.5V

Overload Indication:

RedLEDindicatesinputgreaterthantheselectedrange

Typical Consumption: 8.6mA

Battery Life: 55hourstypical

3.2 Mechanical Speciﬁcations

Zero Adjustment: 20turnpotentiometer

Maximum Cable Diameter: 0.46" (11.8 mm)

Case Protection: IP20perIEC529

Drop Test:

1.0mon38mmofoakonconcrete;testaccordingtoIEC1010

Mechanical Shock: 100G;testperIEC68-2-27

Vibration:

TestperIEC68-2-6,frequencyrange10Hzto55Hz,amplitude0.15mm

Handle: Lexan®920A,UL94V2

Dimensions: 9.09x1.42x2.64"(231x36x67mm)

Weight: 11.6oz(330g)withbattery

Color: Lightgray

Output Lead: InsulatedcoaxialcablewithinsulatedBNCconnector

Cable Length: 6.5foot(2m)

Autres manuels pour SL261

Table des matières

Autres manuels AEMC Instrument de mesure

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur