AEG Electrolux 79331KF-N Manuel utilisateur

79331KF-N

User manual Ceramic glass hob

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions 2

Safety instructions 2

Description of the appliance 4

Operating the appliance 6

Tips on cooking and frying 11

Care and cleaning 13

What to do if... 14

Disposal 15

Installation instructions 16

Service 18

Subject to change without notice

Operating instructions

Safety instructions

WARNING!

Please comply with these instructions. If you do not, any damage resulting is not covered

by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose physical, sensory

or mental capabilities or lack of experience and knowledge prevents them from using

the appliance safely without supervision or instruction by a responsible person to ensure

that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of food.

• The appliance must not be used as a work surface or as a storage surface

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusible objects

(e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

2Contents

• To avoid small children and pets unintentionally switching the appliance on, we recom-

mend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered service engi-

neers.

• Built-in appliances may only be used after they have built in to suitable built-in units

and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches

or splits), the appliance must be switched off and disconnected from the electrical supply,

to prevent the possibility of an electric shock.

• Repairs to the appliance must only be carried out by trained registered service engineers.

Safety during use

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• There is the risk of burns from the appliance if used carelessly.

• Remove stickers and film from the glass ceramic.

• Cables from electrical appliances must not touch the hot surface of the appliance or hot

cookware.

• Switch the cooking zones off after each use.

• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and

saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or highpressure cleaning

equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the

glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic and should

be removed straightaway.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans

to boil dry.

• Do not use the cooking zones with empty cookware or without cookware.

Safety instructions 3

Description of the appliance

Cooking surface layout

56 34

145 mm

180 mm

120/175/210

170/265 mm

1Single cooking zone 1200 W

2Multi-purpose zone 1400/2200 W

3Control panel

4Single cooking zone 1800 W

5Triple ring cooking zone 800/1600/2300W

6Control panel

Control panel layout

1 2 3

1Timer display

2Child lock with a pilot light

3Stop+Go with a pilot light

4On/Off with indicator

5Multi-purpose zone with pilot lights

6Triple ring zone with pilot lights

4Description of the appliance

7Heat setting indicator

8Timer

9Cooking zones indicator of Timer

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by

touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor

fields which activate a desired function. Do not cover other sensor fields.

If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance

switches itself off.

Sensor field Function

On / Off Switches appliance on and off

Child lock Locking control panel for children

Triple ring To switch outer rings on and off

Multi-purpose

zone

To switch outer rings on and off

STOP+GO To switch the Keep Warm setting on/ off

Automatic warm-

To switch the automatic warm-up function on and off

Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

Control bar

The heat setting and the power function are set via the control bar. The heat setting indi-

cator consists of a chain of light elements.

1Automatic warm-up function

2Heat setting selection

3Cooking zone Off

4Operational readiness indicator for cooking zone

Description of the appliance 5

5Heat setting indicators

6Automatic warm-up indicator

If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance

switches itself off.

Displays

Display Description

The cooking zone is switched off

/ Keep Warm settings Keep Warm / STOP+GO function is switched on

- Heat settings To set heat settings

Automatic Warm-up The Automatic Warm-up function is switched on

Fault Malfunction has occurred

Residual heat Cooking zone is still hot

Child safety device Lock/Child safety device is set

Automatic Switch off Switch off is active

Residual heat indicator

The residual heat indicator lights up, as soon as one cooking zone is hot.

WARNING!

Risk of burns from residual heat! After you switch the appliance off, the cooking zones

need some time to cool down. Look at the residual heat indicator.

Use residual heat for melting and keeping food warm.

Operating the appliance

Switching the appliance on and off

Control panel Display Pilot light

Switch on Touch for 1 second / lights up.

Switch off Touch for 1 second / none goes out.

After switching on, within approx. 10 seconds a heat setting or a function must be set,

otherwise the appliance automatically switches itself off.

Setting the heat setting

Control panel Display

To set the heat

setting

Touch the desired heat setting, if necessary, correct

up or down

/ to

6Operating the appliance

Control panel Display

Switch off Touch

Switching the outside ring on and off

By switching the outside rings on or off, the effective heating surface can be matched to

the size of the cookware.

Before an outside ring can be switched on, the inside ring must be switched on

Triple cooking zone Sensor panel Pilot light

To switch on the central ring Touch for 1-2 seconds. Second pilot light lights up

To switch on the outside ring Touch for 1-2 seconds. Third pilot light lights up

To switch off the outside ring Touch for 1-2 seconds. Third pilot light goes out

To switch off the central ring Touch for 1-2 seconds. Second pilot light goes out

Multi-purpose zone Sensor field Pilot light

To switch on outside ring Touch for 1-2 seconds Second pilot light lights up

To switch off outside ring Touch for 1-2 seconds Pilot light goes out

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time

in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

Control panel Display

To switch on Touch (for 4 seconds)

To switch off Touch previously set heat setting

When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode

then back to the heat setting they were at before

Control panel Display

To switch on Touch

To switch off Touch Previous heat setting (not automatic warm-up or power

function)

STOP+GO does not stop timer functions.

STOP+GO controls the entire control panel apart from the sensor field .

Operating the appliance 7

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When setting a heat

setting using the automatic warm-up function, the cooking zone switches to full power

for a certain amount of time and then automatically switches back to the heat setting set.

Step Control Panel Display

1. Touch

2. Move your finger down

from to select the de-

sired heat setting between

and

/ after 5 seconds . As long as is

displayed, the appliance works at full power. After

the automatic warm up is completed, the heat

setting / is displayed again.

The length of time that the automatic warm up function operates depends on the heat

setting selected.

Heat setting Length of the automatic warm up [min:sec]

1:00

1:40

2:40

4:50

5:30

6:30

8:10

10:10

12:20

2:30

3:30

4:30

---

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

Step Control panel Display/Signal

1. Switch on appliance. Do not set a heat setting.

2. Touch for 4 seconds

The child safety device is switched on.

8Operating the appliance

Switching off the child safety device

Step Control panel Display/Signal

1. Switch on appliance. Do not set a heat setting.

2. Touch for 4 seconds lights up

3. Switch appliance off.

The child safety device is switched off.

The child safety device can only be switched on and off if no heat setting is set.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking session; it remains

activated afterwards.

Step Control panel Display/Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

Until the appliance is next switched off, it can used as normal. After switching off the appliance,

the child safety device is active again.

After overriding the child safety device, a heat setting or a function must be set within

approx. 10 seconds, otherwise the appliance automatically switches itself off.

Using the timer

Function Condition Outcome after the time has

elapsed

Automatic cut-out a heat setting is set acoustic signal

flashes

Cooking zone switches off

Countdown timer cooking zones not in use acoustic signal

flashes

If just one countdown value is set you can change it only when the appliance is switched

on.

If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking

zone is switched off after the time set has elapsed.

If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

Step Control panel Display

1. Touch once Pilot light of the first cooking zone flashes

Operating the appliance 9

Step Control panel Display

2. Touch once Pilot light of the second cooking zone flashes

3. Touch once Pilot light of the third cooking zone flashes

4. Touch once Pilot light of the fourth cooking zone flashes

If other timer functions are set, after a few seconds the shortest remaining time of all the

timer functions is displayed and the corresponding pilot light flashes.

Setting the time

Step Control panel Display

1. Select a cooking zone Pilot light for the cooking zone selected

flashes

2. Touch or

minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Switching off the timer function

Step Control panel Display

1. Select a cooking zone Pilot light of cooking zone selected flashes faster

Time remaining is displayed

2. Touch The time remaining counts backwards to

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Changing the time

Step Control panel Display

1. Select a cooking zone Pilot light of the selected cooking zone

flashes more quickly

Remaining time is displayed

2. Touch or

minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Displaying the time remaining for a cooking zone

Step Control panel field Display

1. Select a cooking zone Pilot light of the cooking zone selected flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

10 Operating the appliance

Table des matières

Autres manuels AEG Electrolux Plaque

AEG Electrolux

AEG Electrolux 79301 KF-N Manuel utilisateur

AEG Electrolux

AEG Electrolux 6530 DG-M Guide produit

AEG Electrolux

AEG Electrolux 24" HK654070XB Manuel utilisateur

AEG Electrolux

AEG Electrolux 95852 G Manuel utilisateur

AEG Electrolux

AEG Electrolux 78001KF-N Manuel utilisateur

AEG Electrolux

AEG Electrolux 76301K-MN Manuel utilisateur

AEG Electrolux

AEG Electrolux FM 6520K-an Manuel utilisateur

AEG Electrolux

AEG Electrolux 88031K-MN Manuel utilisateur

AEG Electrolux

AEG Electrolux 6000K Fiche technique

AEG Electrolux

AEG Electrolux HK764070FB Manuel utilisateur

AEG Electrolux

AEG Electrolux 96901KFE-N Manuel utilisateur

AEG Electrolux

AEG Electrolux U30280 35772G Manuel utilisateur

AEG Electrolux

AEG Electrolux B 99852G Manuel utilisateur

AEG Electrolux

AEG Electrolux 66301K-MN and Manuel utilisateur

AEG Electrolux

AEG Electrolux 34942 G Manuel utilisateur

AEG Electrolux

AEG Electrolux HK624010FB Manuel utilisateur

AEG Electrolux

AEG Electrolux 79850 G Manuel utilisateur

AEG Electrolux

AEG Electrolux 79301 KF-N Manuel utilisateur

AEG Electrolux

AEG Electrolux 75580G-M Manuel utilisateur

AEG Electrolux

AEG Electrolux 68031K-MN Manuel utilisateur

AEG Electrolux

AEG Electrolux 88031KF-N Manuel utilisateur

AEG Electrolux

AEG Electrolux 68002KF-N Manuel utilisateur

AEG Electrolux

AEG Electrolux 111 K Manuel utilisateur

AEG Electrolux

AEG Electrolux 21602 G Manuel utilisateur

Manuels Plaque populaires d'autres marques

Siemens

Siemens EX875KYV1E Fiche technique

AEG

AEG CERAMIC HOB 6010 K Manuel utilisateur

VALERA

VALERA CT 70A Manuel utilisateur

Zanussi

Zanussi ZGF 6420 Manuel utilisateur

Gaggenau

Gaggenau CI 273 Manuel utilisateur

G3 Ferrari

G3 Ferrari Energy Manuel utilisateur

Pkm

Pkm IN4B Manuel utilisateur

Award

Award H903BG Manuel utilisateur

Zanussi

Zanussi VCH 5005 RZ Manuel utilisateur

Miele

Miele KM 523 Manuel utilisateur

Hotpoint

Hotpoint IS67V8CCXT/E Manuel utilisateur

AEG

AEG HK854870XB Manuel utilisateur

Cookology

Cookology SEP600BK Manuel utilisateur

Bauknecht

Bauknecht Hob Manuel utilisateur

Zanussi

Zanussi ZGM 782 Manuel utilisateur

dipo INDUCTION

dipo INDUCTION DIBK218S Manuel utilisateur

Miele

Miele KM 5987 Manuel utilisateur

Miele

Miele KM 360 G Manuel utilisateur