advidia A-44 Manuel utilisateur
Advidia A-44 & A-54
Installation Manual
Installation Manual of Network Camera
1
Thank you for purchasing our product. If there are any questions, or requests, please do not
hesitate to contact the dealer.
This manual may contain inaccuracies or printing errors, and the content is subject to
change without notice. The updates will be added to the new version of this manual. We will
readily improve or update the products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested for fire, shock or casualty
hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not
cover the performance or reliability of the security or signaling aspects of this product. UL
MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”
Installation Manual of Network Camera
2
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Please adopt the power adapter which can meet the safety extra low voltage (SELV)
standard. And source with DC 12V or AC 24V (depending on models) according to the
IEC60950-1 and Limited Power Source standard.
If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should conform to all
the local codes.
Please install blackouts equipment into the power supply circuit for convenient supply
interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if the
camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
Installation Manual of Network Camera
3
Notice:
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended
period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp. The
strong light can cause fatal damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is being
used, make sure that the surface of the sensor not be exposed to the laser beam.
Do not place the camera in extremely hot, cold temperatures (the operating temperature
should be between -10°C ~ 60°C), dusty or damp environment, and do not expose it to
high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
Keep out of water and any liquid.
While shipping, the camera should be packed in its original packing.
Improper use or replacement of the battery may result in hazard of explosion. Please
use the manufacturer recommended battery type.
Installation Manual of Network Camera
4
Table of Contents
CHAPTER 1 INTRODUCTION .......................................................................................................................... 1
1.1 APPLICATIONS ........................................................................................................................................ 1
1.2 PREPARATIONS....................................................................................................................................... 1
CHAPTER 2 DOME CAMERA INSTALLATION ............................................................................................... 2
2.1 DOME CAMERAA-44/A-54...................................................................................................................... 2
2.1.1 Appearance Description ................................................................................................................... 2
2.1.2 Installation......................................................................................................................................... 3
A-44 & A-54 Installation Manual
1
Chapter 1 Introduction
The network camera is an embedded digital surveillance product that combines the features
of both traditional analog cameras and built in web server. This built-in video server provides
the capability of providing real-time video stream compression, processing, video analysis
and transmission simultaneously. Applying the latest processing chip and hardware platform,
Advidia network cameras can be widely applied to various surveillance and image
processing systems with high reliability and stability.
1.1 Applications
This camera can be adopted for network video surveillance systems, e.g.:
Network surveillance for over-the-counter activities in banks, ATMs, supermarkets
and factories.
Remote surveillance systems for nursing homes, kindergartens and schools.
Artificial Intelligent access control systems .
Artificial Intelligent office building/residential compounds management systems.
Unguarded power station and telecommunication base station surveillance systems.
Pipelining and warehousing monitoring systems.
Surveillance systems for airports, railway stations, bus stops, etc.
1.2 Preparations
Before you start:
Verify the package contents are correct by checking the items against the packing
list.
Read the following contents carefully before installation.
Make sure that all the related equipment is power-off during installation.
Check whether the power supply is matched with your AC outlet to avoid damage.
Do not place the camera in extremely hot or damp environments. To avoid over
heating, proper ventilation is required.
If the product does not function properly, please contact your dealer or the nearest
service center. Do not disassemble the camera for repair or maintenance by
yourself.
A-44 & A-54 Installation Manual
2
Chapter 2 Dome Camera Installation
2.1 Dome Camera A-44, A-44IR & A-54
2.1.1 Appearance Description
Camera description:
Figure 2-1 Overview
Table 2-1 Description
No.
Description
1
10M/100M self-adaptive Ethernet interface
2
INITIAL SET: Reset button
3
AUDIO OUT: Audio output interface
4
MIC IN: Audio input interface
5
D+, D-: RS-485 interface
6
1A, 1B, 2A, 2B: Alarm output interface
7
IN1, GND, IN2, GND:Alarm input interface
8
Power supply interface
Note: To reset the default parameters to the camera, you need to press and hold the
RESET button and power on the camera. After the power on of the camera, you must still
press and hold the Reset button for about 20 seconds
Camera wiring Diagram:
A-44 & A-54 Installation Manual
3
Figure 2-2 Wiring Diagram
2.1.2 Installation
Ceiling mounting:
Note: If required, you can use a plier to remove the clip (one or two) on the side of the back
box and then route cables through the opening to secure the cables on the ceiling.
Figure 2-3 Remove the Clip
Steps:
1. Use the screws to fix the mounting base to the ceiling; rotate the back box
counterclockwise to secure it to the mounting base; use the lock screw to secure the
dome camera.
A-44 & A-54 Installation Manual
4
Figure 2-4 Mount the Camera
2. Loosen the set screws with the hex key (supplied) to remove the lower dome.
Figure 2-5 Remove the Lower Dome
3. Connect the RCA analog video output toa monitor to view the image of the camera.
Loosen the lens set screw and pan, tilt or rotate the lens to get a desired surveillance
angle. Adjust the lens focus to obtain a perfect image and then tighten the lens set screw.
A-44 & A-54 Installation Manual
5
Figure 2-6 Adjust the image
4. Reinstall the lower dome and tighten the screws.
Figure 2-7 Reinstall the Lower Dome
In-ceiling mounting:
Steps:
1. Secure the mounting base to the in-ceiling mounting base with screws.
Autres manuels pour A-44
2
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels advidia Caméra de sécurité
advidia
advidia A-200 Manuel utilisateur
advidia
advidia P-3360-OD Manuel utilisateur
advidia
advidia M-84-FW-L Manuel utilisateur
advidia
advidia M-45-FW Manuel utilisateur
advidia
advidia M-44-V-T-V2 Manuel utilisateur
advidia
advidia A64 Manuel utilisateur
advidia
advidia M-29-FW Manuel utilisateur
advidia
advidia B-210 Manuel utilisateur
advidia
advidia A-14 Manuel utilisateur
advidia
advidia M-87-V Manuel utilisateur
advidia
advidia A-28-Z Manuel utilisateur
advidia
advidia M-46-FW-V2 Manuel utilisateur
advidia
advidia A-47 Guide de l'utilisateur
advidia
advidia M-44-V-T Manuel utilisateur
advidia
advidia E-37-V Manuel utilisateur
advidia
advidia A-15 Manuel utilisateur
advidia
advidia M-26-FW Manuel utilisateur
advidia
advidia A-46 Manuel utilisateur
advidia
advidia M-49-FW Manuel utilisateur
advidia
advidia A65 Manuel utilisateur
