Advantech MIC-3355 Manuel utilisateur

MIC-3355

6u-sized Pentium®processor-based

CPU module for CompactPCI ®

MIC-3355 User's Manual

This document is copyrighted, 1998. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows®is a registered trademark of Microsoft Corp.

PICMG™, CompactPCI™ and the PICMG™, CompactPCI™ logos

are trademarks of the PCI Industrial Computers Manufacturers Group

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

SiS is a trademark of Silicon Integration Systems Corporation.

All other product names or trademarks are properties of their

respective owners.

PartNo.2006335520 3rd Edition

Printedin TaiwanJanuary2000

Preface and Table of Contents

Packing List

Before installing your board, ensure that the following materials have

been received:

• 1 MIC-3355 all-in-one single board computer

• 1CD-ROM disc including Ethernet utility programs, IDE utility

programs and SVGA utility programs and drivers for Windows 3.1/

95/NT and OS/2

• 1 hard disk drive (IDE) interface cable (44-pin)

• 1 warranty certificate

• This user's manual

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

MIC-3355 User's Manual

Contents

Chapter 1: Hardware Configuration ............................................ 1

1.1 Introduction.................................................................... 2

1.2 Specifications.................................................................. 3

1.2.1 Standard SBC functions .............................................. 3

1.2.2 PCI-to-PCI Bridge ...................................................... 4

1.2.3 VGA interface............................................................. 4

1.2.4 100Base-T Ethernet Interface..................................... 4

1.2.5 Mechanical and environmental specifications ............. 5

1.3 Board Layout: Dimensions .......................................... 6

1.4 Jumpers and Connectors ............................................. 7

1.5 Board Layout: Jumper Locations ............................... 8

1.6 Board Layout: Connector Locations........................ 10

1.7 Safety Precautions ....................................................... 11

1.8 Jumper Settings........................................................... 12

1.9 Installing SDRAM (DIMMs) .................................... 15

Chapter 2: Connecting Peripherals ........................................... 17

2.1 IDE Device connector (CN10)

and Floppy Drive connector (CN9) ............................... 19

2.2 VGA Display Connector (CN2)..................................... 21

2.3 Parallel Port Connector (CN6)...................................... 21

2.4 Keyboard and PS/2 Mouse Connector (CN1).............. 21

2.5 Serial Ports (CN6: COM1 and COM2)......................... 21

2.5.1 RS-232 connection (COM1-CN6) ............................. 22

2.5.2 RS-232/422/485 connection (COM2-CN6) ............... 22

2.6 Power Connectors (CN7 & CN8) .................................. 22

2.6.1 Main power connector +5 V, +12 V (CN7) ............... 22

2.6.2 CPU fan power supply connector (CN8)................... 23

2.7EthernetConfiguration(CN4)....................................... 23

RJ-45A connector (CN4) .................................................... 23

Network boot ...................................................................... 23

2.8 USB Connector (CN5)................................................ 23

Preface and Table of Contents

2.9 IR Interface (LED1).................................................... 24

2.10 Card Installation ......................................................... 24

Chapter 3: VGA Display & Ethernet Software Configuration ... 27

3.1 Introduction.................................................................. 28

3.2 Utility and Drivers ....................................................... 28

3.3 VGA Display Setup and Configuration ..................... 30

3.3.1 VGA Display Setup and Configuration for DOS .......30

3.3.2 VGA Driver Setup for Autodesk

ADI 4.2 (Protected Mode) ............................................ 32

3.3.3VGADisplaySetupandConfiguration

for Microsoft Windows NT 3.5x .................................. 32

3.3.4VGADisplaySetupandConfiguration

for Microsoft Windows NT 4.0 .................................... 34

3.3.5VGADisplaySetupandConfiguration

for Microsoft Windows 95............................................ 35

3.3.6VGADisplaySetupandConfiguration

for Microsoft Windows 3.x............................................ 36

3.3.7VGADisplaySetupandConfiguration

for IBM OS/2 Ver. 2.1 .................................................... 39

3.3.8VGADisplaySetupandConfiguration

for IBM OS/2 Warp 3.0 (Double Byte Character).......... 39

3.3.9VGADisplaySetupandConfiguration

for IBM OS/2 Warp 3.0 (Single Byte Character) ............40

3.4 Ethernet Software Configuration ............................... 41

Chapter 4: Award BIOS Setup ................................................... 43

4.1 AWARD BIOS Setup................................................... 44

4.1.1 Entering setup ............................................................44

4.1.2 Standard CMOS setup ..............................................45

4.1.3 BIOS features setup..................................................46

4.1.4 CHIPSET features setup ..........................................50

4.1.5 Power management setup .........................................51

4.1.6 PCI configuration setup .............................................52

4.1.7 Load BIOS defaults...................................................52

MIC-3355 User's Manual

4.1.8 Load setup defaults ...................................................52

4.1.9 Integrated Peripherals ...............................................53

4.1.10 Password setting.......................................................53

4.1.11 IDE HDD auto detection ..........................................53

4.1.12 Save & exit setup .....................................................54

4.1.13 Exit without saving....................................................54

Appendix A: Programming the Watchdog Timer .................... 55

A.1 Programming the Watchdog Timer.......................... 56

Appendix B: Pin Assignments ................................................... 59

B.1 CRT Display Connector (CN2) ............................. 60

B.2 COM1 RS-232 Serial Port (CN6) ......................... 60

B.3 COM2 RS-232/422/485 Serial Port (CN6).......... 61

B.4 Keyboard and Mouse Connnector (CN1) ........... 61

B.5 Main Power Connector (CN7) .............................. 62

B.6 IDE Hard Drive Connector (CN10)..................... 63

B.7 USB Connector (CN5) ........................................... 64

B.8 CPU Fan Power Connector (CN8) ....................... 64

B.9 Ethernet RJ-45 Connector (CN4)........................ 65

B.10 Floppy Drive Connector (CN9) ............................ 66

B.11 Parallel Port Connector (CN6).............................. 67

B.12 System I/O Ports ..................................................... 68

B.13 DMA Channel Assignments ................................. 69

B.14 Interrupt Assignments........................................... 70

B.15 1st MB Memory Map ............................................ 70

B.16 J3 Connector Pin Assignments ............................ 71

Preface and Table of Contents

Figures

Figure 1-1: MIC-3355 board layout: Dimensions ................................ 6

Figure 1-2: MIC-3355 board layout: Jumper locations ...................... 8

Figure 1-3: MIC-3355 board layout: Connector locations ............... 10

Figure 1-4: MIC-3355 board layout: Jumper settings ...................... 13

Figure 2-1: Installing the HDD ............................................................ 20

Figure 2-2: Installing the card into the chassis ............................... 25

Figure 4-1: Setup program initial screen ......................................... 44

Figure 4-2: CMOS setup screen ....................................................... 45

Figure 4-3: BIOS features setup screen .......................................... 46

Figure 4-4: CHIPSET features setup screen .................................... 50

Figure 4-5: Power management setup screen ............................... 51

Figure 4-6: PCI configuration screen ............................................... 52

Figure 4-7: Integrated peripherals ................................................... 53

Tables

Table 1-1: MIC-3355 jumpers ............................................................ 7

Table 1-2: MIC-3355 connectors ....................................................... 8

Table 1-3: CPU clock ratio setting ................................................... 14

Table 2-1: List of connectors .......................................................... 18

Table 2-3: MIC-3355 serial port default settings ............................ 22

Table B-1: MIC-3355 CRT display connector .................................. 60

Table B-2: MIC-3355 COM1 RS-232 serial port ............................... 60

Table B-3: MIC-3355 COM2 RS-232/422/485 series port ............... 61

Table B-4: MIC-3355 keyboard connector ...................................... 61

Table B-5: MIC-3355 mouse connector .......................................... 62

Table B-6: MIC-3355 main power connector .................................. 62

Table B-7: MIC-3355 IDE hard drive connector ............................... 63

Table B-8: USB1/USB2 connector ................................................... 64

Table B-9: MIC-3355 CPU fan power connector ............................. 64

Table B-10: MIC-3355 Ethernet RJ-45 connector ............................. 65

Table B-11: MIC-3355 floppy drive connector ................................... 66

Table B-12: MIC-3355 parallel port connector .................................. 67

Table B-13: System I/O ports ............................................................. 68

Table B-14: DMA channel assignments ............................................ 69

Table B-15: Interrupt assignments ................................................... 70

Table B-16: 1st MB memory map ...................................................... 70

Table B-17: J3 Connector Pin Assignments ..................................... 71

Hardware

Configuration

This chapter gives background

information on the MIC-3355. It then

shows you how to configure the card to

match your application and prepare it for

installation into your chassis.

Sections include:

• Card specifications

• Board layout: dimensions

• Board layout: jumper locations

• Board layout: connector locations

• Safety precautions

• Jumper settings

• InstallingSDRAM (DIMMs)

CHAPTER

2MIC-3355 User's Manual

1.1 Introduction

TheMIC-3355 isa 6U-sizedCompactPCI™, all-in-onesingleboard

Pentium®processor-based CPU card which complies with PICMG 2.0

R2.1 CompactPCI specifications. The MIC-3355 offers all the functions

of an industrial computer on a single board CPU card. This card

supports an Intel Pentium, Pentium MMX, AMD K5, AMD K6, Cyrix

M1 or Cyrix M2 processor. The card accepts up to 256 MB SDRAM. It

also supports on-board 512 KB PB-SRAM 2nd level cache.

The MIC-3355 uses a single-chip solution, allowing on-board DRAM

to be shared with the built-in VGA controller. In this configuration, the

chipset always acts as the arbiter between memory bus masters. This

system ensures efficient memory allocation while substantially

reducing the overall system cost.

On-boardfeatures include512 KB2nd level cachememory,100/10

Mbpsfast Ethernetinterface, oneRS-232 port,one RS-232/422/485

port,one multi-modeparallel (ECP/EPP/SPP)port, afloppy drive

controller and a keyboard and PS/2 mouse interface. The built-in high

speed PCI IDE controller supports both PIO and bus master modes.

Two IDE channels are available through the J3 connector and one

channel is available through the on-board connector. Up to two IDE

devices can be connected to one channel, including large hard disks,

CD-ROM drives, tape backup drives and other IDE devices. The MIC-

3355 also supports two USB ports and one fast infrared port.

TheMIC-3355 alsofeatures powermanagement tominimize power

consumption. It complies with the "Green Function" standard and

supports three types of power saving features: Doze mode, Standby

mode and Suspend mode. A watchdog timer can automatically reset

the system or generate an interrupt should the system stop due to a

program bug or EMI.

Chapter 1 Hardware Configuration 3

1.2 Specifications

1.2.1 Standard SBC functions

•CPU:IntelPentium®,Pentium MMX,AMDK5, AMDK6, Cyrix M1,

CyrixM2, orIDTWinChipC6

•BIOS:Award 256 KB (2 Mbit) memory; supports plug and play

•Chipset:SiS5598

•L2 cache: On-board 512 KB synchronous (pipeline burst) SRAM

•Greenfunction:Features powermanagement optionvia BIOS,

activated by keyboard or mouse activity. Supports doze, standby

and suspend modes. APM 1.1 compliant

•RAM:Two 168-pinDIMM sockets.Supports SDRAMwith memory

capacity up to 256 MB

•EIDEinterface: Handlesup to4 IDEHDDs orother IDEdevices via

the J3 connector, or 2 IDE devices through the on-board connector.

Supports PIO mode 4 and Ultra DMA mode

•FDD interface: Supports up to two floppy disk drives through the J3

connector or on-board connector

•Parallelport: Configuredto LPT1,LPT2,LPT3 ordisabled.

Supportsmulti-mode parallelport(SPP/ECP/EPP)

•Serialports:Two16C550 UARTs,one RS-232,oneRS-232/422/485

interface

•Watchdogtimer: Can generate a system reset or IRQ 15. Software

enabled/disabled. Time interval is from 1 to 63 seconds, jumperless

with run-time setup

•Keyboard/mouseconnector: 6-pinmini-DIN connectoronthe front

panel

•USBinterface:Two USB connectors with fuse protection. Complies

withUSB specification1.0

•Infraredport:Fast IrDA. Transfer rate up to 4 Mbps. I/O port

programmabletoCOM1 (3F8),COM2(2F8),COM3(3E8) orCOM4

(2E8).

Table des matières

Autres manuels Advantech Carte mère

Advantech

Advantech ASMB-622 Manuel d'installation et d'exploitation

Advantech

Advantech MIO-5271 Manuel utilisateur

Advantech

Advantech SIMB-M22 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-275 Manuel utilisateur

Advantech

Advantech AIMB-288E Manuel utilisateur

Advantech

Advantech MIO-5270 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-9550F Manuel utilisateur

Advantech

Advantech AIMB-223 Manuel d'installation et d'exploitation

Advantech

Advantech UPGRD-KIT-48UXP Manuel utilisateur

Advantech

Advantech MIO-2270 Manuel utilisateur

Advantech

Advantech PCA-6774 Manuel utilisateur

Advantech

Advantech MIO-2360 SBC Manuel utilisateur

Advantech

Advantech ASMB-788 Manuel utilisateur

Advantech

Advantech AIMB-U233 Manuel utilisateur

Advantech

Advantech PCE-5127 Manuel utilisateur

Advantech

Advantech PCA-6781 Manuel utilisateur

Advantech

Advantech PCI-6881 Series Manuel utilisateur

Advantech

Advantech 100/10 Manuel utilisateur

Advantech

Advantech AIMB-253 Series Manuel utilisateur

Advantech

Advantech ROM-DB3900 Manuel utilisateur

Advantech

Advantech PPC-MB-8260AE Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-232G2-U7A1E Manuel utilisateur

Advantech

Advantech AIMB-764 Manuel d'installation et d'exploitation

Advantech

Advantech B+B SmartWorx Airborne WLNN-EK-DP551 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur