ADTRAN 1200864L1 Manuel utilisateur

NetVanta Analog Modem Dial Backup Interface Module (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

SPECIFICATIONS

Features Supported Standards: ITU-T V.90

Async

Compliance FCC Part 15 Class A, EN 55022 Class A, EN 55024,

EN 61000-3-2, EN 61000-3-3

ACTA/FCC Part 68, IC CS-03

UL/CUL 60950

Physical Dimensions: 2.5-inch W x 3.75-inch D

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, noncondensing

NetVanta modules should be installed only in

NetVanta Series products.

ANALOG MODEM DBU CONNECTION PINOUTS

INSTALLATION INSTRUCTIONS

1. Remove power from the base unit.

2. If the Network Interface Module (NIM) is already in the NetVanta

chassis, release the pins at both edges of the NIM faceplate and

slide the module out of the chassis.

3. Carefully align the P1 connector on the NIM with the J1 connector

on the analog modem DIM. Using only fingertip pressure so that

neither circuit board bends or flexes, ensure that the connectors

are firmly seated. Secure the analog modem DIM to the NIM

using the screws and standoff posts supplied.

4. Slide the NIM with the analog modem DIM attached into the

NetVanta option slot until the NIM is firmly seated against the

chassis.

5. Secure the pins at both edges of the NIM.

6. Connect the cables to the associated device(s).

7. Complete installation of the base unit.

8. Restore power to the base unit.

For NetVanta modules with outside plant

connections, ensure that all cables are

removed from the module before installing

or removing it from the NetVanta chassis.

Pin Name Description

1-3 — Unused

4 R Network-Ring

5TNetwork-Tip

6-8 — Unused

Important: For additional details on product

features, specifications, installation, and safety,

refer to the appropriate Hardware Installation

Guide on the ADTRAN OS System Documentation

CD shipped with the base unit and available online

at www.adtran.com.

NetVanta Analog Modem Dial Backup Interface Module (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

ANALOG MODEM DIM COMMANDS

alias <“text”>

Populates the ifAlias OID (Interface Table MIB of RFC2863) for all physical

and virtual interfaces when using SNMP management station.

caller-id override [always <number> | if-no-CID <number>]

Configures the unit to replace caller ID information with a user-specified

number. Use the no form of this command to disable any caller ID overrides.

always <number> Always forces replacement of the incoming

caller ID number with the number given.

if-no-CID <number> Replaces the incoming caller ID number with

the number given only if there is no caller ID

information available for the incoming call.

description <text>

Identifies the specified interface, both physical and virtual (for example,

circuit ID, contact information, etc.), using up to 80 alphanumeric characters.

dialin

Enables the modem for remote console dial-in, disabling the use of the

modem for dial-backup.

init-string <string>

Specifies an initialization string using standard AT commands. Use the no

form of this command to return to the default initialization string.

<string> Specifies an initialization string using standard

AT commands. This string must start with AT

and cannot contain spaces. The default string

is ate0q0v1x4\n0.

shutdown

Disables the interface (both physical and virtual) so that no data will be

passed through. Use the no version of this command to turn on the interface

and allow it to pass data.

Autres manuels ADTRAN Matériel réseau

ADTRAN

ADTRAN OSU 300 Manuel utilisateur

ADTRAN

ADTRAN BVL3ADJD Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1531 Series Manuel

ADTRAN

ADTRAN HD-10 BRI MUX Mode d’emploi

ADTRAN

ADTRAN FXO+ DUAL VOICE Manuel utilisateur

ADTRAN

ADTRAN ISU 512E Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1224 Mode d’emploi

ADTRAN

ADTRAN 6540 Mode d’emploi

ADTRAN

ADTRAN ESU LT Manuel utilisateur

ADTRAN

ADTRAN Total Access 480 Manuel utilisateur

ADTRAN

ADTRAN T200 HTU-R Manuel utilisateur

ADTRAN

ADTRAN 401 1 GE Micro ONT Manuel utilisateur

ADTRAN

ADTRAN 1202803L1 Manuel utilisateur

ADTRAN

ADTRAN TOTAL ACCESS 600R Manuel utilisateur

ADTRAN

ADTRAN 17004660F1/F3 Manuel

ADTRAN

ADTRAN Express 6500 Series Mode d’emploi

ADTRAN

ADTRAN NT1 ACE Manuel utilisateur

ADTRAN

ADTRAN HTU Nx64 Manuel utilisateur

ADTRAN

ADTRAN 1700900F2 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1700801G1 Manuel utilisateur

ADTRAN

ADTRAN 1200312L5 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1000 Series Manuel

ADTRAN

ADTRAN GPON TA352 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 8044M Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur