Adp HandPunch Manuel utilisateur

ADP Full HandPunch®

Quick Installation Guide

ADP provides this publication “as is” without warranty of any kind, either

express or implied, including, but not limited to, the implied warranties of

merchantability or fitness for a particular purpose.

ADP is not responsible for any technical inaccuracies or typographical

errors that may be contained in this publication. Changes are periodically

made to the information herein, and such changes will be incorporated in

new editions of this publication. ADP may make improvements and/or

changes in the product and/or the programs described in this publication

at any time without notice.

ADP Full HandPunch®Quick Installation Guide (ezLaborManager)

Document Revision History

Document

Revision Product Version Changes Release Date

AADP HandPunch

Manager v1.2.0.5 New Document November 2005

BADP HandPunch

Manager v1.2.0.7

Removal of 4000

HandPunch Units January 2006

CADP HandPunch

Manager v2.0.0.x

Removal of Soft-

ware Install/New

Data Converter

September 2006

DADP HandPunch

Manager v3.0.0.x Minor edits January 2008

Contents

Tools and Materials.............................................................................. 3

Check the Contents of the Box.........................................................4

Decide Where to Mount the HandPunch......................................... 8

Use the Mounting Guide to Mark the Wall.....................................9

Sheetrock Wall Installation............................................................. 10

Power and Communications Setup ....................................................11

Power and Communications Jack Installation (Direct

Connect)............................................................................................ 12

Power and Communications Jack Installation (Modem

Connect)............................................................................................ 13

Power and Communications Jack Installation (Ethernet

Connect)............................................................................................ 14

Fasten the Mounting Plate to the Wall ......................................... 15

Mount the HandPunch........................................................................ 16

Power and Communications Connection .......................................... 17

Attach the Power and Communications Cables (Direct

Connect)............................................................................................ 18

Attach the Power and Communications Cables (Modem

Connect)............................................................................................20

Attach the Power and Communications Cables (Ethernet

Connect)............................................................................................ 21

Complete the Mounting of the HandPunch ...................................22

Set Up the HandPunch Reader (Ethernet Connect Only) .........23

Appendix A ...........................................................................................25

Cable Specifications (Direct Connect) .....................................25

Cable Connections (Direct Connect)..........................................25

Appendix B: Connecting More than One HandPunch

(Direct Connect).............................................................................26

Appendix C: Connecting More than One HandPunch

(Modem Connect)............................................................................27

Appendix D: Connecting More than One HandPunch

(Ethernet Connect)........................................................................28

Appendix E: Bell Relay to HandPunch Wiring...............................29

Appendix F: Door Access Relay to HandPunch Wiring ..............30

FailSafe Lock .................................................................................. 31

FailSecure Lock .............................................................................. 31

Appendix G: Resetting the HandPunch Memory..........................32

Congratulations!

You are about to save time and increase

payroll accuracy by automating your

time and attendance.

This guide will show you the basic steps for

installing your ADP Full HandPunch.

WARNING: Installation of your HandPunch will require you to address electrical,

telecommunication and other configurations and arrangements. You are advised to

consult appropriate professional technicians for the installation of your HandPunch.

Any deviation from the installation process contained in this guide or from the

recommended use of the HandPunch may result in damage to the HandPunch, your

facility or personal injury. A damaged HandPunch may incorrectly transmit, alter or

lose your data. In no event will ADP be responsible for any such damage, injury,

alteration or loss.

This Quick Installation Guide will take you step by step

through the installation and setup of your ADP Full

HandPunch:

1) We will prepare you for the installation process by:

• Gathering the tools and materials needed

• Checking the contents of the HandPunch box

• Deciding where to mount the HandPunch

2) Then we will help you to install the hardware, including:

• Power and communications equipment

• Mounting your HandPunch

• Communications cabling

Tools and Materials

Assemble the following tools and materials:

Phillips screwdriver Tape

Tape measure Drill with ¼" bit

Pencil & Ruler Scissors

1. Check the Contents of the Box

Check that the following items are in the HandPunch box, starting

from the top of the box and working your way down:

One power adapter for 110V AC outlets (in a white box)

One

ADP Full HandPunch Quick Installation Guide

One

HandPunch Quick Reference Card - Full & LE Models

One

Supervisor HandPunch Quick Reference Card - Full &

LE Models

One

ADP HandPunch Manager Installation Guide

One

ADP HandPunch Manager

One set of keys

One 8-pin green Phoenix connector (for relay wiring)

Three flat #8 stainless washers

One 2-pin Wieland plug

Three molly fasteners

Two auger connectors and screws

One wall mounting plate

One wall mount paper template

One HandPunch instructional poster

One RS-422 wall mount jack

Connection equipment as follows:

Direct connect:

Modem connect:

One 6 foot

RS-422 wire

AND

One 12 inch wire

for daisy chaining

One 6 foot

modem cable

AND

One 12 inch wire

for daisy chaining

AND

(Continued on next page.

)

Autres manuels pour HandPunch

Table des matières

Autres manuels Adp Terminal tactile

Adp

Adp 508MT Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur