ADEK MB800 Manuel utilisateur
MB800
Pentium 4 Intel 845G
Industrial Motherboard
USER’S MANUAL
Version 1.0B
ii MB800 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
IntelandPentium4 areregisteredtrademarksof IntelCorporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.
MB800 User’s Manual iii
Table of Contents
Introduction...............................................................1
Product Description..........................................................1
Checklist...........................................................................2
Specifications....................................................................3
Board Dimensions.............................................................4
Installations ..............................................................5
Installing the CPU.............................................................6
ATX Power Installation ....................................................7
MicroPCI Daughter Card Installation................................7
Installing the Memory.......................................................8
Setting the Jumpers...........................................................9
Connectors on MB800.....................................................13
Watchdog Timer Configuration.......................................29
BIOS Setup..............................................................29
Drivers Installation.................................................51
Intel Chipset Software Installation Utility........................52
Intel 845G Chipset Graphics Driver Installation ..............55
Intel Application Accelerator Installation ........................57
Sigmatel AC97 Codec Audio Driver Installation .............61
Intel PRO LAN Drivers Installation.................................63
Appendix.................................................................65
A. I/O Port Address Map ................................................65
B. Interrupt Request Lines (IRQ)....................................66
iv MB800 User’s Manual
This page is intentionally left blank.
INTRODUCTION
MB800 User’s Manual 1
Introduction
Product Description
The world's first Pentium 4 industrial motherboard, MB800, is based on
the Intel 845G chipset. It packs the key features of the 845G chipset,
including 533MHz processor side bus and integrated LAN and graphics.
The 845G chipset includes Intel's new ICH4 I/O control hub that
supports USB 2.0 with peak transfer rate of up to 480Mbps.
The AGP4X integrated graphics supports interface such as TV out,
LVDS and CRT. It can have up to DVMT 64MB shared memory.
One-channel and dual-channel digital display are supported with
resolutions of up to 1600x1200 and 2048x1536 @ 60Hz respectively.
The MB800 motherboard supports Pentium 4 processors of up to
2.6GHz+ and comes optionally with a secondary LAN that supports
either up to 1000Mb/s (Gigabit LAN) or 100Mb/s data transfer rate. Two
DDR slots on board support up to 2GB of DDR200/266 non-ECC DDR
SDRAM modules. Hardware monitoring is available with the Winbond
W83627HF chipset on board.
Other special features of the board includes 256-level watchdog timer,
DiskOnChip socket, digital I/O (4 in / 4 out) and PCI to ISA bridge.
Measuring 305mm by 244mm, MB800 also has an AGP slot, three PCI
slots, three ISA slots and a MicroPCI socket. With ISA slots on board and
a long life cycle, MB800 is the powerful platform of choice for industrial
applications.
INTRODUCTION
2MB800 User’s Manual
Checklist
Your MB800 package should include the items listed below.
•The MB800 Industrial motherboard
•This User’s Manual
•1 IDE Ribbon Cable
•1 Floppy Ribbon Cable
•1 Bracket for 1 Serial Port
•1 Bracket for 2 Serial Ports
•I/O Shield Plate
•1 CD containing the following:
•Chipset Drivers
•Flash Memory Utility
INTRODUCTION
MB800 User’s Manual 3
Specifications
CPU Socket Socket 478
CPU Intel Pentium 4, 1.70GHz ~ 2.60GHz+
CPU PSB
(Processor Side Bus)
400MHz (100MHz x4), / 533MHz (133MHz x4)
Chipset Intel 845G / GE Chipset
L2 Cache 128K/256K/512K, CPU integrated
BIOS Award BIOS, ACPI supported
System Memory Two DDR slots
Support up to 2GB DDR200/266 non-ECC DDR SDRAM
DDR333 supported by 845GE (MB800H / MB800FH)
Hyper Threading Supported by 845GE chipset (MB800H / MB800FH)
Onboard VGA Intel 845G / GE chipset integrated, AGP 4X
Supports CRT VGA interface
Optionally supports TMDS, LVDS, TV-out interface
Supports DVMT 64MB shared memory
Supports Dual channel DVO port
CRT Monitor: up to 2048x1536 @60Hz
Supports one-channel digital display, 1600x1200 @60Hz
Supports dual-channel digital display, 2048x1536 @60Hz
Primary LAN ICH4 integrated Ethernet, 10/ 100Base-TX
Secondary LAN
(option) Intel 82540EM (Gigabit LAN) / 82551QM (10/100Mb)
Audio ICH4 integrated audio with AC97 Codec
Audio connectors on board
LPC I/O Winbond 83627HF supports IrDA x 1, Parallel x 1, COM1
(RS232), COM2 (RS232/422/485), FDC up to 2.88MB (3
Mode support) Hardware Monitor
IDE Interface Built in ICH4; Two enhanced IDE supports 4 IDE devices
including UDMA33/66/100, PIO mode 4 and bus master
FDD Interface Supports up to two floppy disk drives: 3.5" and/or 5.25"
drives; 3 Mode support
Parallel Port One parallel port supports SPP/EPP/ECP
Serial Ports One RS-232/422/485 and three RS-232 ports
COM3 and COM4 supported by Winbond 83877
Watchdog Timer Generates system reset; 256 levels
SSD Interface Supports 2MB~288MB M-Systems DiskOnChip flash disk
H/W Monitoring Built in Winbond W83627HF; monitors system/CPU
temperature and voltage status
USB USB 1.1 and 2.0 compliant
Supports 4 USB ports
IrDA Pin header
Keyboard / Mouse
PS/2 type keyboard and mouse connectors
Digital I/O 4 in / 4 out
Expansion Slots 1 AGP, 3 PCI, 3 ISA, 1 MicroPCI
PCI to ISA Bridge Winbond 83628, Winbond 83629
Power Connector ATX 12V power connector
(J10, J12 connectors)
Form Factor ATX Motherboard
Dimensions 305mm x 244mm (12” x 9.6”)
INTRODUCTION
4MB800 User’s Manual
Board Dimensions
INSTALLATIONS
MB800 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the MB800 in order to set up a workable system. The
topics covered are:
Installing the CPU.................................................................6
ATX Power Installation........................................................7
MicroPCI Daughter Card Installation....................................7
Installing the Memory...........................................................8
Setting the Jumpers...............................................................9
Connectors on MB800 ........................................................13
INSTALLATIONS
6MB800 User’s Manual
Installing the CPU
The MB800 motherboard supports a Socket 478 processor socket for
Intel Pentium 4 processors.
The Socket 478 processor socket comes with a lever to secure the
processor. Raise this lever to about a 90°angle to allow the insertion of
the processor. Place the processor into the socket by making sure the
notch on the corner of the CPU corresponds with the notch on the inside
of the socket. Once the processor has slide into the socket, return the lever
to the lock position. Refer to the figures below.
After you have installed the processor into the socket, check if the
jumpers for the CPU type and speed are correct.
NOTE:
Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
Table des matières
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
