ADDER AdderLink XD522 Manuel utilisateur

AdderLink XD522

Quick Start Guide

AdderLink XD522

Transmitter

AdderLink XD522

Receiver

Main CATx link carries:

Video

Keyboard/mouse True USB Emulation

Audio

RS232 Serial

Optional CATx link carries:

Hi-Speed USB only

IMPORTANT: Please see the full AdderLink

XD522 user guide for safety, warranty and

regulatory information. The full user guide is

available from www.adder.com.

Part No. MAN-XD5x2-QS-ADDER • Release 1.0a

Web: www.adder.com

Contact: www.adder.com/contact-details

Support: forum.adder.com

Front panel indicators

The six front panel indicators on each unit provide a useful guide to

operation:

• AOn Main A link is connected.

Flashes Main A link is not connected.

Off No power is present.

• BOn Optional B link is connected.

Off Optional B link is not connected.

• V1 On Video port 1 is connected and receiving video.

Flashes Video port 1 is connected but not receiving video.

Off Video port 1 is not connected.

• V2 On Video port 2 is connected and receiving video.

Flashes Video port 2 is connected but not receiving video.

Off Video port 2 is not connected.

• HR On High Rate mode is active.

Flashes HR mode is preferred but cannot be established, LR mode active.

Off Low Rate mode is active.

• PS On Power connected.

Flashes Upgrade error (other indicators show error code).

Off No power.

Tips for achieving good quality links

Due to the large volumes of data that must be transferred between

the transmitter and receiver, every AdderLink XD522 installation

is highly dependent upon good quality CATx cable links. Video

performance is particularly reliant on high speed communication

channels. For this reason, the AdderLink XD522 units periodically

test the link quality to determine which of two video transfer modes

can be supported: Low Rate or High Rate. Please see page 3 for

details about high and low rate video modes.

The main factors that affect link quality are:

• The length and type of CATx cable used,

• The number, length and type of intermediate patch connections,

• The quality of the cable terminations.

The table below provides a brief overview of distances that may be

achieved using different CATx cable types. Please see the full user

guide for more details.

Transmitter - front Receiver - front

Transmitter - rear

Primary and

secondary

DisplayPort

video

inputs

Audio

line

in/out

USB

link A

port

Power

input

USB

link B

port

Multi

function

Serial

port

Line In

jack supports

mini-TOSLINK

Receiver - rear

Audio

line

in/out

Power

input

Multi

function

Serial

port

Optional

link

Main

link

Line Out

jack supports

mini-TOSLINK

Primary and

secondary

DisplayPort

video

outputs

Video support

AdderLink XD522 works hard to transfer the highest possible video

bandwidth between the transmitter and receiver units. To allow for

the differing grades of CATx links used to join the transmitter and

receiver, AdderLink XD522 periodically checks the quality of link A

(the primary cable joining the transmitter and receiver). In this way it

can accurately determine which of two video transfer modes can be

supported. Please see the rear page for details about achieving good

quality links.

On the front panel, the HR indicator will illuminate when High Rate

mode is available, whereupon the available bandwidth for video

signals is more than doubled.

The manner in which bandwidth is made available to the two video

ports differs between the Low and High Rate modes, as described

here:

EDID management

AdderLink XD522 intelligently manages the EDID (Extended Display

Identiﬁcation Data) information that each video display provides

(detailing their supported resolutions) before reporting them to

the host PC. In this way AdderLink XD522 can mask the resolution

modes that cannot be supported within the available bandwidth.

The display attached to Video port 1 will always be given priority. If

sufﬁcient bandwidth does not exist for the modes declared by the

second display, then it will not be reported to the host PC.

High rate mode

This diagram indicates how the total bandwidth of the high rate mode can

be shared between the two video ports.

Video port 1 (which has priority) may take up 280 MegaPixels per second (of the

total 308 Mpix/sec bandwidth); while port 2 can use a maximum of 154 MPix/sec

(subject to port 1 using no more than 154 MPix/sec of the available total bandwidth).

For example:

A single WQXGA

mode display could

consume nearly

all of the port 1

bandwidth alone,

or...

... two WUXGA

mode displays could

share the total

evenly.

Note: The example modes shown here are for illustrative purposes and are based

upon average requirements for current video displays. Video displays from some

manufacturers may consume more signal bandwidth than those shown here.

* All approximate video mode bandwidth ﬁgures are quoted with reduced blanking.

During low rate mode, the secondary video

port is disabled and a total bandwidth

of 148.5 MegaPixels per second is made

available to the primary video port. This

is more than enough to support a single

1080P video display.

Low rate mode

Optional

link

Main

link

Front panel

indicators

(see rear

page)

Hi-Speed

USB port

True

Emulation

USB port

Headphone/

microphone

sockets

True

Emulation

USB ports

Front panel

indicators

(see rear

page)

Autres manuels pour AdderLink XD522

Autres manuels ADDER Extenseur

ADDER

ADDER ADDERLINK AV200 Series Manuel utilisateur

ADDER

ADDER AdderLink X2 Dual Access Manuel utilisateur

ADDER

ADDER AdderLink X100 Manuel utilisateur

ADDER

ADDER ADDERLink INFINITY 101T-DVI Manuel utilisateur

ADDER

ADDER ADDERLink XD612 Manuel utilisateur

ADDER

ADDER AdderLink Infinity Manager Manuel utilisateur

ADDER

ADDER AdderLink XDIP Manuel utilisateur

ADDER

ADDER AdderLink AV series Manuel utilisateur

ADDER

ADDER Link X200 Manuel utilisateur

ADDER

ADDER ADDERLink INFINITY 4000 Manuel utilisateur

ADDER

ADDER AdderLink Infinity Manager Manuel utilisateur

ADDER

ADDER AdderLink Digital iPEPS Manuel utilisateur

ADDER

ADDER AdderLink Infinity ALIF2000 Manuel utilisateur

ADDER

ADDER AdderLink Infinity Manager Manuel utilisateur

ADDER

ADDER AdderLink X2 Dual Access Manuel utilisateur

ADDER

ADDER AdderLink Digital iPEPS Manuel utilisateur

ADDER

ADDER ADDERLink INFINITY 1100 Manuel utilisateur

ADDER

ADDER AdderLink X-USBPRO Manuel utilisateur

ADDER

ADDER ADDERLink XD641 Manuel utilisateur

ADDER

ADDER AdderLink XDIP Manuel utilisateur

ADDER

ADDER ADDERLink INFINITY 3000 Manuel utilisateur

ADDER

ADDER AdderLink XD150FX Manuel utilisateur

ADDER

ADDER CUSBEXT100 Manuel utilisateur

ADDER

ADDER ADDERLink INFINITY 2100 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur