ADDER AdderLink X-USBPRO Manuel utilisateur
AdderLink X-USBPRO
Analog video and USB extenders
contents
welcome contents
installation
operation
rter
inormation
1
Contents
Welcome
Introduction.................................................................................2
Supplied items .............................................................................3
Optional items .............................................................................4
Installation
Connections .................................................................................5
Mounting .....................................................................................5
Connections at the local module ...........................................6
Local module power connection.......................................8
Connections at the remote module.......................................9
Dual user configuration .......................................................12
Video display (DDC) information.........................................13
Video compensation.............................................................14
What is skew and why is compensation needed?..........14
Operation
General use ................................................................................16
Dual user arbitration.................................................................16
Peripheral operation .................................................................16
Further information
Getting assistance......................................................................17
Troubleshooting ........................................................................17
Warranty ....................................................................................18
Safety information ....................................................................18
Radio Frequency Energy............................................................19
HT
welcome contents
installation
operation
rter
inormation
2
USB
device
USB
device
ADDER®
PC
AUDIO
VIDEO (1)
VIDEO (2)
USB
Up to 300 metres
separation
CATx link cable (1)
CATx link cable (2)
ADDER®
Welcome
Introduction
Thank you for choosing the AdderLink X-USBPRO
or X-USBPRO-MS2 extenders which provide a
very effective way to put distance between your
computer and its peripherals.
The compact casings and ease of use of the
modules belie the ingenuity of their operation.
Using our proprietary transmission techniques we
are able to reliably transfer more signals than ever
before along a single length of Category 5, 5e, 6, 7
or 7a twisted pair cabling. What this means for you
is that your video, audio, USB keyboard, USB mouse
and two other USB channels are all readily and
reliably available at up to 300 metres away.
Using the Adder X-USBPRO extenders does not
mean that you need to compromise on functionality
in any way. Our highly efficient transmission
methods mean that CD quality sound and high
video resolutions of up to 1920 x 1200 are fully
supported. Any lag effects caused by long cable
runs are easily eliminated using the intuitive video
compensation system located within the remote
module. Three equalisation bands allow you to
ensure that every colour arrives at precisely the
right time, ensuring a sharp image every time. The
X-USBPRO-MS2 model uses an additional CATx
connection to provide dual analog video links.
The USB connections are seamless allowing four full
speed USB 2.0 devices to be used simultaneously
with full support for disconnect/re-connect at any
time without causing errors.
The Adder X-USBPRO extenders have been
designed to be quick to install and totally
transparent in operation: ‘Fit and forget’ is the
motto. So whether you are extending your
workplace or creating a cost-effective distributed
audio visual system, the X-USBPRO extenders
provide the power and flexibility to create the right
solution.
HT
CAT 5 250m
CAT 5e 250m
CAT 6 300m
CAT 7 300m
CAT 7a Patch 200m
Maximum cable lengths
*The MS2 variant
provides a second
analog video channel.
welcome contents
installation
operation
rter
inormation
3
Supplied items
X-USBPRO local
module
Power adapter and
country- specific
power lead (for
remote module)
X-USBPRO
remote module
USB (A to B
type) lead
Audio lead
(3.5mm jacks)
Video lead
(15 way, male to male)
CD-ROM
Video lead
(15 way, male to male)
Self adhesive
feet
AdderLink X-USBPRO extender modules
X-USBPRO-MS2
local module
X-USBPRO-MS2
remote module
AdderLink X-USBPRO-MS2 dual video extender modules The MS2 variant package includes all of the above ancillary items plus:
Power adapter and
country- specific
power lead (for
MS2 local module)
welcome contents
installation
operation
rter
inormation
4
Optional items
Power adapter and country- specific
power lead for local module (if USB
powering not possible)
Part number: PSU-IEC-5VDC-2.5A
Rack mount plate for X-USBPRO module
(useable for the local or remote modules)
Part number: X-RMK-FASCIA
Rack mount chassis
Part number: X-RMK-CHASSIS
Rack mount plate for X-USBPRO-MS2 module
(useable for the local or remote modules)
Part number: X-RMK-FASCIA-DUAL
welcome contents
installation
operation
rter
inormation
5
Installation
Connections
Installation of the X-USBPRO modules is straightforward with minimal
configuration requirements in most cases.
• Connections at the local module
• Connections at the remote module
Important
The X-USBPRO can be used with other USB hubs in the system, but please note
that due to power constraints, the local unit should not be connected to the
downstream port of a bus-powered USB hub. Additionally, X-USBPRO-MS2 local
units must always be powered using their supplied power adapter. Please see
page 8 for details.
HT
1
ON
4
23
Mounting
The X-USBPRO modules offer two main mounting methods:
•Suppliedfourself-adhesiverubberfeet
•Optionalrackmountbrackets-seebelow
welcome contents
installation
operation
rter
inormation
6
From
USB port
From primary video
output port
Connections at the local module
1 Where possible ensure that power is disconnected from the computer
system to be connected.
3 Use the supplied USB cable to
link the USB socket of the local
module to a vacant USB socket
on the computer.
2 Use the supplied video lead to
link the video input socket of
the local module to the video
output port of the computer.
[MS2 variant only] Optionally
attach a second video input to
the upper video in socket on
the MS2 local module.
From primary video
output port
From secondary video
output port
Note: Do not use USB cables longer than 3 metres to
connect the local module to the computer.
4 Optionally connect an audio link
from the computer’s speaker port
to the audio input port on the local
module.
From audio port
To local
speakers
5 Optionally connect local speakers to the audio output port on the local
module.
Important
The X-USBPRO can be used with other USB hubs in the system, but please
note that due to power constraints, the local unit should not be connected
to the downstream port of a bus-powered USB hub. Additionally,
X-USBPRO-MS2 local units must always be powered using their supplied
power adapter. Please see page 8 for details.
welcome contents
installation
operation
rter
inormation
7
5 Connect a category 5, 5e, 6, 7 or 7a link cable (up to 300 metres in length)
to the ‘TO REMOTE’ socket on the local module.
To local
video display
Link to remote
module
[MS2 variant only] Connect a second
category 5, 5e, 6, 7 or 7a link cable (up
to 300 metres in length) to the upper
socket on the MS2 local module.
Primary CATx
link cable
Secondary CATx
link cable
6 Optionally connect a local video display to the video out feed-through
connector on the local module.
[MS2 variant only] Optionally connect a
second local video display to the upper
socket on the MS2 local module.
To primary
video display
To secondary
video display
welcome contents
installation
operation
rter
inormation
8
Local module power connection
The standard X-USBPRO and the X-USBPRO-MS local modules differ in the way
that they are powered:
• TheX-USBPROlocalmoduleisdesignedtoderiveitspowerfromthehost
computer via the USB connection. If this is not possible, then use an optional
Adder power adapter (part number: PSU-IEC-5VDC-2.5A), available from
your Adder stockist
• The X-USBPRO-MS2 local module always requires the use of a power adapter
and hence two power adapters are supplied with all X-DVIPRO-MS2 units.
For all X-USBPRO-MS2 and optionally for X-USBPRO units:
1 Connect the output lead of the
optional power adapter to the
socket labelled ‘POWER‘ on the
local module.
2 Insert the IEC connector of the separate power lead into the corresponding
socket of the power adapter.
3 When all other connections have been made at the transmitter and receiver
modules, connect the other end of the power cable to a nearby earthed
power outlet.
X-USBPRO: Use an optional
power adapter only if
power from the host (via
USB) is not possible.
Note: After all connections
are made, power up the
monitor and the REMOTE
module first (followed by
the LOCAL module, if using
the X-USBPRO-MS2 variant)
and then switch on the
computer.
X-USBPRO-MS2: Use the
supplied power adapter for
all installations.
welcome contents
installation
operation
rter
inormation
9
Connections at the remote module
1 Place the remote module adjacent to the user location.
To video
display
2 Attach the leads of up to four
USB devices (two of which are
usually a keyboard and mouse)
to the sockets located adjacent
to the video output connector.
3 Attach the lead from the
video display to the video
out socket on the remote
module.
To USB
devices
[MS2 variant only] Optionally
attach the lead from a second
video display to the upper
video out socket on the MS2
remote module.
To primary
video display
To secondary
video display
[MS2 variant only] When connecting four USB
devices to the unit, ensure that their total power
requirements do not exceed 1700mA (1.7A).
The USB standard states a maximum allowable
current draw of 500mA (0.5A) per device,
although most devices remain well
below this limit - USB keyboards
and mice typically require 100mA.
Each X-USBPRO contains a self-
resetting fuse that will prevent
damage by shutting down the
unit if the total power draw
becomes excessive.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ADDER Extenseur
ADDER
ADDER AdderLink X-DVIPRO Manuel utilisateur
ADDER
ADDER AdderLink LPV154T Manuel utilisateur
ADDER
ADDER AdderLink LPV Manuel utilisateur
ADDER
ADDER AdderLink XDIP Manuel utilisateur
ADDER
ADDER Link X200 Manuel utilisateur
ADDER
ADDER AdderLink AV series Manuel utilisateur
ADDER
ADDER AdderLink X100 Manuel utilisateur
ADDER
ADDER AdderLink XDIP Manuel utilisateur
ADDER
ADDER AdderLink XD522 Manuel utilisateur
ADDER
ADDER AdderLink XD522 Manuel utilisateur
ADDER
ADDER AdderLink XD150 Manuel utilisateur
ADDER
ADDER AdderLink Digital iPEPS Manuel utilisateur
ADDER
ADDER AdderLink Infinity 100T Manuel utilisateur
ADDER
ADDER ADDERLink INFINITY 3000 Manuel utilisateur
ADDER
ADDER AdderLink Infinity 100T Manuel utilisateur
ADDER
ADDER Link DV100 Manuel utilisateur
ADDER
ADDER ADDERLink LPV154 Manuel utilisateur
ADDER
ADDER AdderLink XD150FX Manuel utilisateur
ADDER
ADDER ADDERLink INFINITY 2100 Manuel utilisateur
ADDER
ADDER AdderLink X2 Dual Access Manuel utilisateur
