Adam Equipment MTB Manuel utilisateur

ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than

40 years experience in the production and sale of electronic weighing equipment.

Adam products are predominantly designed for the Laboratory, Educational, Health and

Fitness, retail and Industrial Segments. The product range can be described as follows:

-Analytical and Precision Balances

-Compact and Portable Balances

-High Capacity Balances

-Moisture analysers / balances

-Mechanical Scales

-Counting Scales

-Digital Weighing/Check-weighing Scales

-High performance Platform Scales

-Crane scales

-Health and Fitness Scales

-Retail Scales for Price computing

For a complete listing of all Adam products visit our website at www.adamequipment.com

may be reprinted or translated in any form or by any means without the prior permission of

Adam Equipment.

Adam Equipment reserves the right to make changes to the technology, features,

specifications and design of the equipment without notice.

All information contained within this publication is to the best of our knowledge timely,

complete and accurate when issued. However, we are not responsible for

misinterpretations which may result from the reading of this material.

The latest version of this publication can be found on our Website.

www.adamequipment.com

Adam Equipment

MTB SCALE

(Revision A1, July 2013)

SPECIFICATIONS

Capacity 20 kg, 44 lb:oz

Readability 0.005 kg 1 oz.

Weighing units Kg, and Lb:Oz

Power 6V, 500ma adaptor

Batteries 4 x AA size

Pan Size 560 x 285 mm

(22” x 11.2”)

Overall Size (w x h x d) 560 x 350 x 140 mm

(22" x 13.75" x 5.5")

Net weight 3.2 kg (7 lb.)

OPERATION

Install batteries, ensuring the polarity is as shown in the battery holder, or insert the power supply into

the connector on the rear of the scale.

Place the scale on a flat, very stable surface, and clear the scale platform.

Press the [ON/ZERO] key, turning on the scale.

Display will show 0.000 kg or 0 0.00lb:oz. depending on the last weighing unit selected.

It is now ready to weigh.

Put the subject on the scale platform, the display shows the weight.

Press the [ON/ZERO] key briefly to tare the scale, setting the display to 0.00.

Any additional weight added will displayed.

SELECT WEIGHING UNIT

Press the [MODE] key to change from kilograms to pounds:ounces and back again.

The display will show the weighing unit selected.

STORE THE WEIGHT

To store the displayed weight Press the [MEM] key when the LCD display is stable.

RECALL THE STORED THE WEIGHT

To recall the stored weight Press the [MEM] key when the LCD display is at zero

Press it a second time to return to weighing.

To turn off the scale.

Press and hold the [ON/ZERO] key

The scale will turn off automatically after 5 minutes if it is not being used.

CALIBRATION

Place the scale on a flat, very stable surface, and clear the scale platform.

When the scale is off press the [MODE] key, then press the [ON/ZERO] key. Hold both keys down

until the display shows “CAL” then release both keys.

The display will show a number representing the internal count from the sensor

Press the [ON/ZERO] key briefly.

The display will flash “C10 “ and then show “ 0”.

Place a 10kg mass on the platform.

The display will show a number from the sensor.

Press the [ON/ZERO] key.

The display will flash “C20 “ and then show “ 0000”.

Press the [ON/ZERO] key again, the display will show “End” then turn off.

The calibration is complete.

Remove the 10kg mass from the platform and turn on the scale.

Place the 10kg on the scale, it should display 10.000kg ±0.010kg. If it is not within acceptable

values repeat the calibration

WARNING MESSAGES

“Loo”: Low power, please change the batteries.

“o_Ld”: Over loading, please remove the item immediately to protect the scale.

Autres manuels pour MTB

Autres manuels Adam Equipment Échelle

Adam Equipment

Adam Equipment CBC-M Series Manuel utilisateur

Adam Equipment

Adam Equipment GBC Series Manuel utilisateur

Adam Equipment

Adam Equipment LHS Series Manuel utilisateur

Adam Equipment

Adam Equipment HIGHLAND SERIES Manuel utilisateur

Adam Equipment

Adam Equipment ACBplus Series Manuel utilisateur

Adam Equipment

Adam Equipment CBK series Manuel utilisateur

Adam Equipment

Adam Equipment MDW Manuel utilisateur

Adam Equipment

Adam Equipment Warrior Series Manuel utilisateur

Adam Equipment

Adam Equipment CB 501 Manuel utilisateur

Adam Equipment

Adam Equipment ASC Manuel utilisateur

Adam Equipment

Adam Equipment WBZ 3 Manuel utilisateur

Adam Equipment

Adam Equipment 103 Manuel utilisateur

Adam Equipment

Adam Equipment NBL 84 e/i Manuel utilisateur

Adam Equipment

Adam Equipment MTB Manuel utilisateur

Adam Equipment

Adam Equipment NETS ME Price Manuel utilisateur

Adam Equipment

Adam Equipment HIGHLAND SERIES Manuel utilisateur

Adam Equipment

Adam Equipment CFC SERIES Manuel utilisateur

Adam Equipment

Adam Equipment PGL SERIES Manuel utilisateur

Adam Equipment

Adam Equipment CRW Series Manuel utilisateur

Adam Equipment

Adam Equipment SWZ 6D Manuel utilisateur

Adam Equipment

Adam Equipment LBK-3/6a Manuel utilisateur

Adam Equipment

Adam Equipment IHS Series Manuel utilisateur

Adam Equipment

Adam Equipment CB 501 Manuel utilisateur

Adam Equipment

Adam Equipment PGL SERIES Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur