ActionTec GS204AD9-01 Manuel utilisateur

User Manual

Wireless-Ready

DSL Gateway

Table of Contents

1Introduction 1

Package Contents 1

Minimum System Requirements 1

Technical Support 2

2Setting Up the Gateway 5

Warning! 5

Connecting a Computer to the Gateway 6

Installing Filters 21

Setting Up the DSL Connection 23

3Using Qwest DSL 27

Connecting to the Internet 27

Disconnecting from the Internet 27

4Basic Setup 29

Basic Setup 29

Gateway Features 32

5Advanced Setup 33

Accessing Advanced Setup 33

Using Advanced Setup 34

WAN IP Address 35

Wireless Settings 38

LAN IP Address 40

DHCP Server 41

Services Blocking 43

Website Blocking 44

VPN Pass Through 44

Remote Management 45

Port Forwarding 45

DMZ Hosting 47

Firewall 48

Dynamic Routing 48

NAT (Network Address Translation) 49

Static Routing 50

MAC Address Cloning 51

Status 52

Actiontec Wireless-Ready DSL Gateway User Manual

6Utilities 59

Web Activity Log 59

DSL Settings 60

Restore Default Settings 60

Upgrade Firmware 61

7Building a Network 63

Ethernet 63

USB 66

Wireless 69

8Troubleshooting 71

AReference 75

Locating Computer Information 75

Locating Windows Operating System Files 76

Wiring Information 78

BSetting Up Static IP Address 81

Windows 98 and 98 SE 81

Windows Me 84

Windows 2000 87

Windows XP 91

CComputer Security 97

Securing the Gateway and Computer 97

DSpecifications 101

General 101

Wireless Operating Range 102

LED Indicators 102

Environmental 102

EGlossary 103

FSecurity Level Services Table 107

High Security Level 107

Medium Security Level 108

Low Security Level 108

Basic Security Level 108

Acronym Definitions 109

GNon-Windows System Setup 111

Classic 111

OS X 113

Connecting to the ISP 114

Notices 117

Regulatory Compliance Notices 117

Modifications 117

Limited Warranty 119

Introduction

Thank you for purchasing the Actiontec Wireless-Ready Gateway. The Gateway is

the simplest way to connect a number of computers to a single high-speed broad-

band connection. This easy-to-use product is perfect for the office or small busi-

ness. If you want to take your computing to the next level, the Actiontec Wireless-

Ready DSL Gateway is sure to be one of the keys to your success.

Package Contents

Four-port Actiontec Wireless-Ready DSL Gateway

Power adapter

Phone filters

DSL cable

Ethernet cable

USB cable

Installation CD

Quick start guides

Minimum System Requirements

Active DSL service

Computer with an 10 Mbps or 10/100 Mbps Ethernet connection, or USB

connection

Microsoft Windows 95,Windows 98,Windows 98 Second Edition (SE),

Windows Millennium Edition (Me), Windows NT 4.0,Windows 2000,

Windows XP,MacOS 7.1+, Mac OS 8.0+, Mac OS 9.0+, or Mac OS X+

☞Note:USB LAN port is not supported with Microsoft Windows

95,Windows NT 4.0, and Mac OS

Actiontec Wireless-Ready DSL Gateway User Manual

Internet Explorer 4.0 or higher (5.x recommended) or Netscape Navigator

4.0 or higher (4.7 recommended)

TCP/IP network protocol installed on each computer

Technical Support

Self Help

To obtain answers to DSL configuration questions, visit the Qwest DSL Actiontec

support page at this address:

http://www.qwest.com/dsl/customerservice/Actiontec1520.html

A help page is also available on the main page of the Actiontec DSL Gateway Web

interface. Enter

192.168.0.1

in the browser’s address text box, and when the first screen appears, click HELP.

Basic Setup Support

If unable to access the Internet, look at the Internet light on the front of the DSL

Gateway. If the light is solid green,call the ISP immediately. If it is not solid

green,call Qwest at 1-800-247-7285.

Other Problems

Contact the ISP if experiencing problems with:

DHCP addressing configuration

Static IP addressing configuration

Transparent bridging configuration

Contact Qwest at 1-800-247-7285 for:

DSL service outage support and repair

DSL service installation support

NIC card installation of the Qwest-supplied Realtek NIC Card

☞Note:Before attempting any of the above, make sure access to

the Internet is available.

Chapter 1 Introduction

Advanced Feature Support

Qwest DSL technical support provides the following advanced feature support for the

Actiontec DSL Gateway. Contact Qwest at 1-800-247-7285 for configuration assistance.

Enabling Website Blocking

Enabling VPN Pass-Through

Enabling/Disabling NAT

Firewall configuration

Changing the LAN IP address of the DSL Gateway

Enabling Services Blocking

Enabling/Disabling DHCP

VIP feature

These features are supported in the DSL Gateway only. Implementation of the

above features within the network (LAN) is not supported.

Wired/Wireless Upgrade

Wired and wireless upgrade installation support is available from Actiontec free

of charge if the wired/wireless equipment was purchased from Actiontec.

Contact Actiontec at 1-888-436-0675 for installation and configuration support

information.

Networking (LAN) Support

If a wired/wireless network has been set up and support is needed in one of the

following areas:

LAN support of multiple computers and peripherals

Microsoft Windows Networking

Microsoft Internet Connection Sharing (ICS)

Advanced LAN configuration with multiple computers

Actiontec Wireless-Ready DSL Gateway User Manual

Non-Actiontec-provided network card/Ethernet cable installation, configu-

ration, or troubleshooting

Commercial firewall software configuration

contact the Actiontec Pay For Support Center at 1-888-825-9025.Actiontec net-

working support is provided for a fee of $29.95 per incident. Other fee-based fea-

ture support includes:

Port Forwarding (Static NAT)

Static Routing

MAC Address Cloning

Third-party vendor wireless equipment configuration

DMZ Hosting

NAT Routes

RIP (Dynamic Routing)

This support service does not include an on-site field technician.

To purchase Actiontec wireless cards and peripherals, visit the Actiontec Web site at

www.actiontecstore.com/qwest

Setting Up

the Gateway

The instructions that follow parallel the steps contained in the Actiontec Installation

Buddy™,which provides a visual guide to setting up the Gateway. It is recommended

the user run the Installation Buddy first, before attempting any other procedures.

To set up the Gateway, it must be connected to a computer, and then configured.

After connecting this first computer, other computers can be added to the network

via USB,Ethernet, or wirelessly (see “Building a Network” on page 57).

Warning!

Read the following two sections (Alarm System, Automatic Water Heater)

before proceeding with any installation!

Alarm System

If your home or business has an alarm system and Qwest DSL shares the same

phone line, you have special wiring needs. If you did not order a technician install

at the time of sale, please contact Qwest Sales as soon as possible to order and

schedule your installation.

If you security alarm is wired incorrectly, it may not be able to make a notification

call when the alarm is triggered. Professional wiring is required to insure interoper-

ability. Do not attempt the installtion yourself. Qwest strongly recommends that

you contact your security organization for more information about your security

alarm system before you attempt to install Qwest DSL. Qwest also strongly recom-

mends that you contact your security organization after installing Qwest DSL to

have them conduct a test of your alarm system.

Automatic Water Meter

If your home or office has an automatic water meter that uses the same phone line

as the Qwest DSL Gateway, you must put a DSL Phone Filter on the water meter.

Call your water company for help when installing the DSL Phone Filter on your

water meter.

Actiontec Wireless-Ready DSL Gateway User Manual

Connecting a Computer to the Gateway

Connecting a computer to the Gateway involves three basic steps: initial setup,

plugging in the Gateway’s Power Cord, and connecting the Gateway to the com-

puter via Ethernet or USB cable. To connect this initial computer to the Gateway

using an Ethernet cable, follow the procedure that begins below. For USB connec-

tions, see “Connecting Via USB” on page 14.

☞Note:The following procedures are for U.S. installations only.

Connecting Via Ethernet

1. Insert the Actiontec Installation Buddy CD-ROM in the CD-ROM drive of

the computer. The Installation Buddy will start automatically. Wait until the

following screen appears, read the onscreen instructions, then click Next.

2. The next window appears. Read the instructions, select First Computer by

clicking on the check box, then click Next.

Chapter 2 Setting Up the Gateway

3. The next window appears. Read the onscreen information, then get the

“Terms and Agreement” document from the White Bag and read it as well.

Then, select I accept this agreement and click Next.

4. The next window appears. Select Ethernet,then click Next.

5. The next window appears. Read the onscreen instructions, then click Next.

☞Note:You must have your Welcome Letter (ISP Worksheet) to

complete this installation. If you have not received this docu-

ment, contact your ISP immediately.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ActionTec Porte

ActionTec

ActionTec GT701-WG Manuel utilisateur

ActionTec

ActionTec C1000A Manuel utilisateur

ActionTec

ActionTec GT704WGRV Manuel utilisateur

ActionTec

ActionTec GT724WG Manuel utilisateur

ActionTec

ActionTec GT724WG Manuel

ActionTec

ActionTec WCB3000N Manuel utilisateur

ActionTec

ActionTec Wireless-Ready DSL Gateway Manuel utilisateur

ActionTec

ActionTec VOSKY UP101 Manuel utilisateur

ActionTec

ActionTec DSL GATEWAY GT704 Manuel utilisateur

ActionTec

ActionTec R1524SU Manuel utilisateur

ActionTec

ActionTec Wireless DSL Gateway GT704WG-QW04 Manuel utilisateur

ActionTec

ActionTec GT704-WG Manuel utilisateur

ActionTec

ActionTec R1020S(U) Manuel utilisateur

ActionTec

ActionTec DSL GATEWAY GT704 Manuel utilisateur

ActionTec

ActionTec V1000H Manuel utilisateur

ActionTec

ActionTec GT701-WG Manuel utilisateur

ActionTec

ActionTec GT701-WG Manuel utilisateur

ActionTec

ActionTec GT704-WG Manuel utilisateur

ActionTec

ActionTec GT704-WG Manuel utilisateur

ActionTec

ActionTec PK5000 Manuel utilisateur

ActionTec

ActionTec GT704WGB Manuel utilisateur

ActionTec

ActionTec DSL GATEWAY GT704 Manuel utilisateur

ActionTec

ActionTec T3200M Manuel utilisateur

ActionTec

ActionTec PK5001A Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur