Acorp 6M810E Manuel utilisateur
Chapter 1 Introduction / 1
Introduction
How This Manual is Organized
This manual is divided into the following sections:
Chapter 1 Introduction : Manual information and checklist.
Chapter 2 Features : Information and Specifications con-
cerning this mainboard.
Chapter 3 Installation : Instructions on setting up the board.
The mainboard is a high-performance mainboard based on the
advanced Socket 370 microprocessor, the VGA, Audio , PCI Bus
and the Intel 810E chipset (6M810E) / Intel 810-DC100 chipset
(6M810D) / Intel 810 chipset (6M810CN).
1
Chapter 1
2 / Chapter 1 Introduction
Package Checklist
Please check that your package is complete . If you discover any item
damaged or missing , please contact with your retailer immediately.
The 6M810E/810D/810CN mainboard.
Serial COM2 conector with bracket
1 x IDE UDMA 66 ribbon cable.
1 x floppy ribbon cable.
6M810E/810D/810CN drivers and utilities
This user's Manual
Chapter 2 Features / 3
2
Chapter 2
Features
Features of the 6M810E/810D/810CN Mainboard
Intel 810-DC100 (GMCH+ICH) chipset supports 66/100MHz
FSB, UltraDMA 66. (6M810D)
Intel 810 (GMCH+ICH) chipset supports 66/100MHz FSB,
UltraDMA 66. (6M810CN)
Intel 810E (GMCH+ICH) chipset supports 66/100/133MHz
FSB, UltraDMA 66. (6M810E)
Supports Intel's Celeron and Coppermine processor designed
for socket 370 package in PPGA,FC-PGA.
Socket 370 Celeron / Coppermine up to 700MHz/1GMHz
processor.
4 / Chapter 2 Features
Integrated Graphics controller supports 3D hyper pipelined
architecture, parallel data processing and compression, precise
pixel interpolation, full 2D hardware acceleration , and motion
video acceleration. Optional on board 4MB SDRAM display
cache allows upto 1024x768x16 bit color for 3D graphics and
1600x1200x8 bit color for 2D graphics.
Support "Touch Button Wake up" for soft power on/off and sus-
pend mode multifunction.
Support Windows 95/98 system Software shutdown (power off)
automatically.
Support CPU FAN ON/OFF and LED indicator under SUSPEND
mode.
Support Resume by Ring through Modem.
Uses 168-Pin DIMM modules(supports Intel PC100
compliant SDRAMs) x2 auto banking in multiple configuration
up to 512MB. (6M810D/810CN)
Uses 168-Pin DIMM modules(supports Intel PC100/133
compliant SDRAMs) x2 auto banking in multiple configuration
up to 512MB. (6M810E)
3 x PCI Bus slots, and 1 x AMR (Audio Modem Riser) slots.
All 3 PCI slots support Master mode.
PCI Bus master IDE interface on board with two connectors sup-
port 4 IDE devices in 2 channel, the PCI IDE Controller sup-
ports PIO Mode 0 to Mode 4, Bus master IDE DMA Mode 2
and Ultra DMA 66MB.
Chapter 2 Features / 5
System BIOS support 4 IDE hard disk drivers that don't need
device driver for S/W application.
Support PS/2™ mouse Connector.
Support the Universal Serial Bus (U.S.B).
Support Floppy A.
System BIOS supports LS-120, ZIP driver firmware and Green
feature function, Plug and Play Flash ROM.
AC'97 DAC built into the audio CODEC reduces noise to im-
prove audio quality and performance for a SNR (signal to noise
ratio) of +90dB. These features greatly improve voice synthe-
sis and recognition. If more quality is required, an optional
onboard Crysial PCI audio improves audio quality beyond soft-
ware audio.
Support Software Virus Warning in BIOS.
Support ACPI functionStatic Electricity Precautions.
Thermal detect (GL520SM) : (option)
The system's BIOS will sense CPU's temperature through
GL520SM on board. The User can watch what current tempera-
ture of CPU is & current CPU FAN status is from BIOS. To
Using LDCM software (optional ) . The user will watch the indi-
cation on Win 95/98 environment.
6 / Chapter 2 Features
The 6M810E/810D/810CN Mainboard Layout
2MB SDRAM
AUDIO
CODEC
USB
COM1
VGA
AMR SLOT
PCI SLOT3
PCI SLOT2
PCI SLOT1
MIDI
GAME
AUDIO
JP20 JP18
T: K /B
B: Mouse
Printer
JP19
PANEL
JP12
SB-LINK
JP16
JP17
FAN1
Jp5
JP1
JP14
JP15
FAN2
4M bit
Firmw are
HUB
(
FW H
)
I/O
Controller
HUB (ICH)
AUDIO
CODEC
JP13
2MB SDRAM2MB SDRAM
2MB SDRAM2MB SDRAM
Option
Chapter 3 Installation / 7
Installation
3
Chapter 3
Jumper
Jumper Refer to page
JP15 - CMOS Clear 11
JP13 - CPU bus frequency selection 16
JP1 - Wake On Keyboard 17
JP14 - BIOS Flash protection 17
FAN1 - FAN Connector 23
FAN2 - FAN Connector 23
JP12 - IrDA Connector 25
JP18 - Lan Card Wake Up 29
JP20 - Modem Card Wake Up 29
JP10 - SB-LINK Connector 30
8 / Chapter 3 Installation
Expansion Slot
Which pages
PCI SLOT 1,2,3 -32bits PCI SLOT 21
AMR SLOT - Audio Modem Riser Slot 21
Connectors Refer to page
MS - PS/2 Mouse port (UP) 22
KB - PS/2 AT Keyboard port (DOWN) 22
COM1 - COM 1 serial port 22
COM2 - COM 2 serial port 22
USB - Universal Serial BUS Ports 1 & 2 22
PRINT - Parallel port 22
FDC - FLOPPY connector 22
IDE1 - Primary IDE connector 24
IDE2 - Secondary IDE connector 24
JP19 - HDD LED 26
JP19 - Reset Switch 26
JP19 - Power LED 26
JP19 - SMI Switch 26
JP19 - Suspend LED 27
JP19 - Speaker Connector 27
JP19 - ATX Power switch 27
PW1 - ATX Power Connector 27
CD1 - Audio Connector 28
CD2 - Audio Connector 28
Chapter 3 Installation / 9
System Installation Setup
Before using your computer, you must finish the following steps:
1. Set jumpers on mainboard
2. Install SDRAM module.
3. Install the Processor.
4. Connect Ribbon Cables, Cabinet Wires, and Power supply.
5. Install Add on Cards.
6. Setup the BIOS software.
Static Electricity Precaution
Keep the mainboard and other system components in their anti-
static packaging until you are ready to install them.
Do all preparative work on a static-free surface with the main
board components facing up.
Unplug your computer when working on the inside.
Wear an Anti-static wrist strap.
Hold the system components, boards or cards by its edges only.
Be careful not to touch any of IC chips, circuitry, contacts or
connections, especially gold contacts on the mainboard.
10 / Chapter 3 Installation
Jumper Settings
Jumpers
Several hardware setting are made through the use of jumper caps
to connect jumper pins (Jxx) on the mainboard. See " Map of the
mainboard" for the location of the jumpers.
The jumper settings will be described numerically such as [----], [1-
2], [2-3] for no connection, connect pins 1 & 2, and connect pins 2
& 3 respectively. Pin 1 for our mainboard is always on top one or
on the left when holding the mainboard with the keyboard away from
yourself. "P1" is written besides pin 1 on jumper with three pins.
The jumpers will also be shown graphically such as to connect
pin 1&2 and to connect 2&3. Jumpers with two pins will be
shown as for Short (off )and for Open (on).For manufac-
turing simplicity it may be sharing pins from other groups. Use the
diagrams in this manual instead of following the pin layout on the
board. Settings with two jumper numbers require that both jumpers
be moved together. To connect the pin, simply place a plastic jumper
cap over the two pins as diagrammed.
Autres manuels pour 6M810E
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Acorp Carte mère
Acorp
Acorp N2PA-400 Manuel utilisateur
Acorp
Acorp 4S651M Manuel utilisateur
Acorp
Acorp 4PX400 Manuel utilisateur
Acorp
Acorp 6ZX85 Manuel utilisateur
Acorp
Acorp 6BX86 Manuel utilisateur
Acorp
Acorp 7KT333 Manuel utilisateur
Acorp
Acorp 4S648FX Manuel utilisateur
Acorp
Acorp 4845GE Manuel utilisateur
Acorp
Acorp 7NFU400 Manuel utilisateur
Acorp
Acorp 694XT Manuel utilisateur
Acorp
Acorp 7KT400 Manuel utilisateur
Acorp
Acorp 6VIA90A Manuel utilisateur
Acorp
Acorp 7KM400QP Manuel utilisateur
Acorp
Acorp 4845PE Manuel utilisateur
Acorp
Acorp 7KMM Manuel utilisateur
Acorp
Acorp 7KTA2 Manuel utilisateur
Acorp
Acorp 6M810D Manuel utilisateur
Acorp
Acorp 6A815EP1 Manuel utilisateur
Acorp
Acorp 4D533 Manuel utilisateur
Acorp
Acorp 7KTA1 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
