Acnodes RPH1193 Manuel utilisateur

User Manual

Industrial Monitors

RPH1193

19" 1440 x 900 Widescreen LCD Monitor

1U Sunlight Readable Rackmount Drawer

VGA + DVI-D Video Input

14628 Central Ave. Chino, CA 91710 Tel: 909.597.7588

Fax: 909.597.1939

notice. For latest product information, please visit Acnodes’ website at www.acnodes.com

Legal Information

First English printing, May 2020

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness

of the contents. The information in this document is subject to change without notice. We are not liable for any injury or

loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, ﬁre or electrical shock.

■Only qualiﬁed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁed service personnel.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modiﬁed or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, ﬁre, water, lightning, or other acts of nature, unauthorized product modiﬁcation, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power ﬂuctuation or failure.

□Use of supplies or parts not meeting our speciﬁcations.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

Any changes or modiﬁcations made to this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment oﬀand on, the

user is encouraged to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

< Part. 3 > Options

3.1 3G / HD / SD-SDI Broadcast-grade input

3.2 HDMI, S-Video + BNC & Audio

3.3 DC Power : 24V / 48V / 125V

P. 8

P. 9

P.10

< Part. 2 > Speciﬁcations / OSD

2.1 Product Speciﬁcations

2.2 On-screen Display Operation ( OSD )

P.4 - 5

P.6 - 7

< Part. 1 > RPH1193

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

Contents

P. 1

P.1 - 2

P. 3

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made speciﬁcally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip oﬀthe ﬁnish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microﬁber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microﬁber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

microﬁber cloth ﬁrst, not directly on the parts you are cleaning.

LCD panel

Installation Slide

LCD OSD membrane

Audio speaker

Carry handle to release the 2-pt lock

2-point lock

< 1.1 > Package Content

< Part 1 >

RPH1193 unit X 1

- 6ft VGA cable X 1

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

< 1.2 > Structure Diagram

The above package content is only for the pure model ( VGA and DVI-D only ).

It varies with options such as SDI, HDMI, AV, audio & DC power.

Model Product Dimension

(W x D x H)

Packing Dimension

(W x D x H) Net Weight Gross

Weight

RPH1193 441.6 x 460 x 44 mm

17.4 x 18.1 x 1.73 inch

588 x 758 x 120 mm

23.1 x 29.8 x 4.7 inch

13 kg

28.6 lb

17 kg

37.4 lb

The weight is only for the pure models. It varies with accessories & options such as SDI,

HDMI, AV, audio & DC power.

< 1.2 > Dimension

Front View

Side View

UNIT : mm

1mm = 0.03937 inch

Top View

Power

VGA

DVI-D

Rear View

■Fix the display drawer into the rack.

Complete the installation

Step 3

■Insert the left and right rear mounting bracket into

the display drawer.

Step 1

< 1.3 > Installation - How to install Installation Slides

Step 2

■Measure the depth of the front and rear mounting rails.

■Align each rear mounting bracket to a suitable length.

M6 screw, cage nut & cup washer x 8 are provided.

Video

Connectivity

Digital HDMI HDMI 1.2, CEA-861-D

DVI DVI-D, TMDS single link

Analog VGA Analog 0.7Vp-p

Composite ( BNC ) NTSC & PAL

S-Video ( 4-pin ) NTSC & PAL

Plug & Play DVI / VGA VESA EDID structure 1.3

Synchronization VGA Separate, Composite & SOG

Audio

Connectivity

Audio Input Connector 3.5mm stereo jack

Impedance / Power level 30kΩ/ 750mV

Audio Output Connector 3.5mm stereo jack

Resistance / Power level 30kΩ/ 2.8V

Speaker Dual Stereo Speaker 2W x 2

* When the audio output is connected, speaker output is OFF

Power Power Supply Range Auto-sensing 100 to 240VAC,

50 / 60Hz

Power Consumption Screen ON Max. 34W

Power saving mode Max. 2W

Power button OFF Max. 1W

LCD

Panel

Manufacturer

Panel Size ( diagonal ) 19-inch Widescreen TFT color LCD

Display pixel ( dots x lines ) 1440 x 900

Brightness ( typ. ) 1000

Contrast Ratio ( typ. ) 1000:1

Color 16.7 M

Viewing Angle ( L/R/U/D ) 80/80/80/80

Response Time ( ms ) 5

Dot pitch ( mm ) 0.2835

Display Area ( mm ) 408.24H x 255.15V

Surface treatment Haze 25%, Hard-coating

Surface hardness 3H

Backlight Type LED

MTBF ( hrs ) 30,000

< 2.1 > Product Speciﬁcations

< Part 2 >

Regulatory Safety FCC & CE certiﬁed

Environmental RoHS2 & REACH compliant

Applicable

Format

DVI-D / VGA Input PC Signal 1440 x 900 x 60Hz

1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 768 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

HDMI Input PC Signal Same as VGA

Video Signal 720p : 50 / 60Hz

480p : 60Hz

576p : 50Hz

Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )

Environmental

Conditions

Operating Temperature 0 to 55°C degree

Humidity 20~90%, non-condensing

Altitude 16,000 ft

Storage / Non-operating Temperature -20 to 60°C degree

Humidity 5~90%, non-condensing

Altitude 40,000 ft

Shock 10G acceleration (11ms duration)

Vibration 5~500Hz 1G RMS random

Physical

Speciﬁcation

Product ( W x D x H ) 441.6 x 460 x 44 mm

17.4 x 18.1 x 1.73 inch

Packing ( W x D x H ) 588 x 758 x 120 mm

23.1 x 29.8 x 4.7 inch

Net Weight 13 kg / 28.5 lb

Gross Weight 17 kg / 37.4 lb

* All dimensions stated are subject to change if options are selected / integrated to base model part codes

< 2.2 > On-screen Display Operation ( OSD )

Exit the OSD screen

Go back to the previous on-screen sub-menu or

main menu

Scroll through menu options and adjust

the displayed control

Display the OSD menu

Act as an Enter key to select screen setting options

Turn the monitor on or oﬀ

Membrane Switch Function

Remark : All LED touch buttons in WHITE light.

The LED of Power touch button will ﬂash continuously when there is no signal input.

All the LED touch buttons will automatically turn oﬀafter 10 minutes of idle status ( except the Power ).

Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).

Autres manuels Acnodes Tiroir LCD

Acnodes

Acnodes KDF8170 Manuel utilisateur

Acnodes

Acnodes KDS 6190 Series Manuel utilisateur

Acnodes

Acnodes KD81912 Manuel utilisateur

Acnodes

Acnodes KD 8150 Manuel utilisateur

Acnodes

Acnodes MKP1602 Manuel utilisateur

Acnodes

Acnodes KDH81712 Manuel utilisateur

Acnodes

Acnodes MKD6019 Manuel utilisateur

Acnodes

Acnodes KD 9219 Manuel utilisateur

Acnodes

Acnodes MKD6219U Manuel utilisateur

Acnodes

Acnodes KD 9150 Manuel utilisateur

Acnodes

Acnodes MKD6219M Manuel utilisateur

Acnodes

Acnodes MKDH8170U Manuel utilisateur

Acnodes

Acnodes KD 8178 Manuel utilisateur

Acnodes

Acnodes KDM 7198 Manuel utilisateur

Acnodes

Acnodes KD 7200 Manuel utilisateur

Acnodes

Acnodes KD 5170N Manuel utilisateur

Acnodes

Acnodes RPH1173 Manuel utilisateur

Acnodes

Acnodes RPWQ1190 Manuel utilisateur

Acnodes

Acnodes KD 5170 Guide de configuration

Acnodes

Acnodes KD 51916 Manuel utilisateur

Acnodes

Acnodes KD 8228 Manuel utilisateur

Acnodes

Acnodes KD8121 Manuel utilisateur

Acnodes

Acnodes KD81174 Manuel utilisateur

Acnodes

Acnodes KDS 6198 Manuel utilisateur

Manuels Tiroir LCD populaires d'autres marques

Ameriwood

Ameriwood 9524328PCOM Manuel utilisateur

Kesseböhmer

Kesseböhmer TANDEM solo Manuel utilisateur

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuel utilisateur

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur

NTI

NTI RACKMUX-V17-N Manuel utilisateur

Austin Hughes

Austin Hughes CyberView L120 Manuel utilisateur

Uplift Desk

Uplift Desk STR018 Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuel utilisateur

Mocka

Mocka Mischa Manuel utilisateur

GRASS

GRASS DWD XP Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1701 Manuel utilisateur

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuel utilisateur

Fujitsu

Fujitsu RC25 Manuel utilisateur

I-Tech

I-Tech RKP115 Manuel utilisateur

iTech Company

iTech Company AMil-1900-D12e-AC Manuel utilisateur

Raloy

Raloy Slim 1U Rackmount Manuel utilisateur

MAVIS

MAVIS Falsterbo Chest Of Drawers Manuel utilisateur