Acnodes MKD6019 Manuel utilisateur

For lastest product information, please visit Acnodes’ website at www.acnodes.com

14628 Central Ave. Chino, CA 91710 Tel: 909.597. 7588 Fax: 909. 597.1939

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the

contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from

the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock.

■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modified or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power fluctuation or failure.

□Use of supplies or parts not meeting our specifications.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contents

< Part. 1 > MKD6017/6019

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

P.1

P.1 - 2

P.3 - 5

< Part. 2 > Specifications / OSD

2.1 Product Specifications

2.2 Keyboard / Mouse Specifications

2.3 On-screen Display Operation ( OSD )

P.6 - 7

P.8

P.9 - 10

< Part. 3 > Options

3.1 Audio

3.2 48V, 24V or 12VDC power P.11

P.11

< Part. 4 > KVM Integration

http://www.acnodes.com/files/downloads/CMKVM-UM.pdf

Matrix

Cat6 KVM Local Remote IP 16-port 32-port

111MKCP1613 MKCP3213

112MKCP1624 MKCP3224

110MKCS1602MKCS3202

1 2 0 MKCS1603MKCS3203

1 3 0 MKCS1604MKCS3204

http://www.acnodes.com/files/downloads/CKVM-UM.pdf

Combo

Cat6 KVM Local Remote IP 8-port 16-port 32-port

101KCP802 KCP1602 KCP3202

110KC802 KC1602 KC3202

100KC801 KC1601 KC3201

Before Installation

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the finish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, pleasefollow these steps :

1 Disconnect the power cord.

2 Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges,please follow these steps :

1 Disconnect the power cord.

2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.

Caution : Do not sprayor apply any liquids directlyonto themonitor. Always apply the solution to your

microfiber cloth first,not directly on the parts you are cleaning.

3 Gently wipe the surface. Use as little pressure as possible.

4 Waituntil your monitor is completely dry before plugging it in and powering it up.

< Part 1 >

< 1.1 > Package Content

< 1.2 > Structure Diagram

MKD6017/6019 unit X 1

- 6ft Combo KVM cable X 1

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

2 8

3 9

1 LCD interchangeable module kit

2 Installation Slides

3 LCD membrane

4 Membrane switch (KVM option)

5 Micro switch for screen auto power off

6 Keyboardinterchangeable module kit

7 Mouse interchangeable module kit

8 Blue Power LED

9 Front USBport for device access ( USB Hub KVMonly )

10 Molded front handle

< 1.2 > Dimension

Front View

Side View UNIT :

1mm = 0.03937 inch

580

Top View

580

Model

Product

Dimension

(W x D x

Packing

Dimension

(W x D x

Net

Weight

MKD6017

MKD6019

17.3 x 22.84 x 1.75"

23.2 x 32.4 x 5.5”

35lbs

< 1.3 > Installation - How to install Installation Slides

Step 1

¦ Insert the left and right rear mounting bracketsinto

the LCDconsole drawer.

Step 2

¦ Measure the depth of the front and rear mountingrails.

¦ Align each rear mounting bracketto a suitable length.

Step 3

Complete the installation

¦ Fix the LCD console drawer into the rack.

M6 screw, cage nut & cup washerx 8 are provided.

Rear mounting

Front mounting

< 1.3 > Installation - How to install 2 post rack brackets

Step 1

¦ Release front mountingears before applying 2

post

ack brackets.

¦ Insert rear mounting brackets into the LCD console

drawer.

Opt

ion

Model :

MB-751-12

Step 2

¦ Align each rear mounting bracketto a suitable length.

Step 3

Complete the installation

¦ Fix the LCD console drawerintothe2 postrack.

M6 screw,cage nut & cup washer x 8

are not provided.

< 1.3 > Installation- How to use the drawer

¦ Hold the handle and slide out the

drawer.

¦ Flip up the LCD toa suitable angle.

¦ Operate the LCD console drawer.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Acnodes Tiroir LCD

Acnodes

Acnodes M3932 Manuel utilisateur

Acnodes

Acnodes KDS61 Series Manuel utilisateur

Acnodes

Acnodes KD 8170 Manuel utilisateur

Acnodes

Acnodes KDI 81916 Manuel utilisateur

Acnodes

Acnodes KD 8150 Manuel utilisateur

Acnodes

Acnodes MKD6219D Manuel utilisateur

Acnodes

Acnodes KD 81716 Manuel utilisateur

Acnodes

Acnodes RP 1170 Manuel utilisateur

Acnodes

Acnodes KDS 6170 Series Manuel utilisateur

Acnodes

Acnodes KD 7200 Manuel utilisateur

Acnodes

Acnodes KDS 5178 Manuel utilisateur

Acnodes

Acnodes KD82234 Manuel utilisateur

Acnodes

Acnodes RPH1190 Manuel utilisateur

Acnodes

Acnodes MKP1602 Manuel utilisateur

Acnodes

Acnodes MKD6017U Manuel utilisateur

Acnodes

Acnodes KD8172 Manuel utilisateur

Acnodes

Acnodes MKD6219M Manuel utilisateur

Acnodes

Acnodes KD 6170 Manuel utilisateur

Acnodes

Acnodes KD 5154 Manuel utilisateur

Acnodes

Acnodes KDX81712 Manuel utilisateur

Acnodes

Acnodes KDH81712 Manuel utilisateur

Acnodes

Acnodes KD 5198 Manuel utilisateur

Acnodes

Acnodes KDS 6198 Manuel utilisateur

Acnodes

Acnodes MKD6117U Manuel utilisateur

Manuels Tiroir LCD populaires d'autres marques

Ameriwood

Ameriwood 9524328PCOM Manuel utilisateur

Kesseböhmer

Kesseböhmer TANDEM solo Manuel utilisateur

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuel utilisateur

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur

NTI

NTI RACKMUX-V17-N Manuel utilisateur

Austin Hughes

Austin Hughes CyberView L120 Manuel utilisateur

Uplift Desk

Uplift Desk STR018 Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuel utilisateur

Mocka

Mocka Mischa Manuel utilisateur

GRASS

GRASS DWD XP Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1701 Manuel utilisateur

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuel utilisateur

Fujitsu

Fujitsu RC25 Manuel utilisateur

I-Tech

I-Tech RKP115 Manuel utilisateur

iTech Company

iTech Company AMil-1900-D12e-AC Manuel utilisateur

Raloy

Raloy Slim 1U Rackmount Manuel utilisateur

MAVIS

MAVIS Falsterbo Chest Of Drawers Manuel utilisateur