Acnodes KD84174 Manuel utilisateur

Rack Consoles

For latest product information, please visit Acnodes’ website at www.acnodes.com.

14628 Central Ave. Chino, CA 91710 Tel: 909.597.7588

Fax: 909.597.1939

17.3" 3840 x 2160 4K Rack KVM Console

104-Key Keyboard with Touchpad

4K KVM Switch with 8 x HDMI USB Ports

KD84174

User Manual

Legal Information

First English printing, November 2020

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness

of the contents. The information in this document is subject to change without notice. We are not liable for any injury or

loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock

■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment an

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel

What the warranty does not cover

■Any product, on which the serial number has been defaced, modified or removed

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, fire, wate , lightning, or other acts of nature, unauthorized product modification, o

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power fluctuation or failure

□Use of supplies or parts not meeting our specifications

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Contents

< Part. 1 > KD84174

1.1 P.1

1.2 P.1-2

1.3 P.3-4

Package Content

Structure Diagram & Dimension

Installation

< Part. 2 > Specifications / OSD

2.1 Product Specification P.5-6

2.2 Keyboard / Mouse Specification P.7

2.3 On-screen Display Operation ( OSD ) P.8-10

< Part. 4 > Option

4.1 P.15

DC Power : 12V / 24V / 48V / 125V

< Part. 3 > KVM Integration

3.1 P.11

3.2 P.12

3.3 P.13

3.4 P.14

KVM Port Connection

Specifications

KVM Button

KVM Hotkey

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made t

clean monitors and monitor screens can scratch the LCD display or strip off the finis

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microfiber cloth

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

microfiber cloth first, not directly on the parts you are cleaning.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

P. 1

< Part 1 > KD84174

< 1.1 > Package Content

LCD interchangeable module kit

Installation Slides

Molded front handle

LCD membrane

- 4A Power adapter & Power cord X 1

- M6 screw, cage nut & cup washer X 8

K117 / K1417

Package Content

Structure Diagram & Dimension

KD84174 unit X 1

Micro switch for screen auto power o󰀨

Keyboard interchangeable module kit

Mouse interchangeable module kit

< 1.2 > Structure Diagram

P.2

Top View

< 1.2 > Dimension

Front View

The weight is only for the single console models. It varies with accessories & options

such as SDI, HDMI & DC power.

UNIT : mm

1mm = 0.03937 inch

Model Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

KD84174 441.6 x 580 x 44 mm

17.4 x 22.8 x 1.73 inch

590 x 808 x 140 mm

23.2 x 31.8 x 5.5 inch

9.5 kg

20.9 lb

16.1 kg

35.2 lb

Side View

P.3

< 1.3 > Installation - Installation Slides

■Fix the LCD console drawer into the rack.

Complete the installation

Step 3

■Insert the left and right rear mounting brackets into

the LCD console drawer.

Step 1

Step 2

■Measure the depth of the front and rear mounting rails.

■Align each rear mounting bracket to a suitable length.

M6 screw, cage nut & cup washer x 8 are provided.

Installation

P.4

< 1.3 > Installation - How to use the drawer

■Press the handle button and gently slide out

the drawer.

■Flip up the LCD to a suitable angle.

■Operate the LCD console drawer.

P.5

Video Package HDMI 2.0 / HDCP 2.2

Power Power Supply Range Auto-sensing 100 to 240VAC,

50 / 60Hz

Power Consumption with

KVM integration Screen ON Max. 38W

Power saving mode Max. 18W

Environmental

Conditions

Operating Temperature 0 to 55°C degree

Humidity 20~90%, non-condensing

Altitude 16,000 ft

Storage / Non-operating Temperature -20 to 60°C degree

Humidity 5~90%, non-condensing

Altitude 40,000 ft

Shock 10G acceleration (11ms duration)

Vibration 10~300Hz 0.5G RMS random vibration

LCD

Panel Native Resolution 3840 x 2160@60Hz

Panel Size ( diagonal ) 17.3-inch TFT color LCD

Brightness ( cd/m² ) 400

Contrast Ratio ( typ. ) 1000:1

Colors 16.7 M, 8-bit

Viewing Angle ( L/R/U/D ) 89/89/89/89

Response Time ( ms ) 16

Dot pitch ( mm ) 0.0995

Display Area ( mm ) 382.12H x 214.94V

Surface treatment Anti-glare

Surface hardness 3H

Backlight Type LED

MTBF ( hrs ) 15,000

Compliance EMC FCC & CE certified

Safety CE / LVD certified

Environment RoHS3 & REACH compliant

< Part 2 > Specifications / OSD

< 2.1 > Product Specifications

Specifications / OS

Product Specification

P.6

Applicable

Format

HDMI Input HDMI 2.0 3840 x 2160 x 60Hz

HDMI 2.0 / 1.4 3840 x 2160 x 30Hz

1920 x 1080 x 50 / 60Hz ( 1080p )

1920 x 1080 x 25 / 30Hz ( 1080i )

1280 x 720 x 50 / 60Hz ( 720p )

720 x 480 x 50 / 60Hz ( 576p / 480p )

* In some circumstances, if the user connects the LCD to PC via HDMI port or video and audio signals, the LCD may display incorrectly on

a full screen. If so, please adjust the display card setting on display size to fix the issue

Physical

Specification

Product ( W x D x H ) 441.6 x 580 x 44 mm

17.4 x 22.8 x 1.73 inch

Packing ( W x D x H ) 590 x 808 x 140 mm

23.2 x 31.8 x 5.5 inch

Net Weight 9.5 kg / 20.9 lb

Gross Weight 16.1 kg / 35.4 lb

* All dimensions stated are subject to change if options are selected / integrated to base model part codes

Table des matières

Autres manuels Acnodes Tiroir LCD

Acnodes

Acnodes MKD6017U Manuel utilisateur

Acnodes

Acnodes MKD6219 Manuel utilisateur

Acnodes

Acnodes RPS 1170 Manuel utilisateur

Acnodes

Acnodes KD 81916 Manuel utilisateur

Acnodes

Acnodes KD 8158 Manuel utilisateur

Acnodes

Acnodes KDM8170 Manuel utilisateur

Acnodes

Acnodes KDI 8178 Manuel utilisateur

Acnodes

Acnodes KD 8158N Manuel utilisateur

Acnodes

Acnodes MKP1602 Manuel utilisateur

Acnodes

Acnodes KDI 81716 Manuel utilisateur

Acnodes

Acnodes KDS 6178 Manuel utilisateur

Acnodes

Acnodes KD 9151N Manuel utilisateur

Acnodes

Acnodes KDS61 Series Manuel utilisateur

Acnodes

Acnodes MKD9172D Manuel utilisateur

Acnodes

Acnodes KDW8190 Manuel utilisateur

Acnodes

Acnodes KD81174 Manuel utilisateur

Acnodes

Acnodes KDS 61916 Manuel utilisateur

Acnodes

Acnodes M3932 Manuel utilisateur

Acnodes

Acnodes KD8121 Manuel utilisateur

Acnodes

Acnodes MKD9172M Manuel utilisateur

Acnodes

Acnodes KDS 6190 Series Manuel utilisateur

Acnodes

Acnodes KDW81912 Manuel utilisateur

Acnodes

Acnodes KD 8151 Manuel utilisateur

Acnodes

Acnodes MKD9172 Manuel utilisateur

Manuels Tiroir LCD populaires d'autres marques

Ameriwood

Ameriwood 9524328PCOM Manuel utilisateur

Kesseböhmer

Kesseböhmer TANDEM solo Manuel utilisateur

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manuel utilisateur

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur

NTI

NTI RACKMUX-V17-N Manuel utilisateur

Austin Hughes

Austin Hughes CyberView L120 Manuel utilisateur

Uplift Desk

Uplift Desk STR018 Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1501 Manuel utilisateur

Mocka

Mocka Mischa Manuel utilisateur

GRASS

GRASS DWD XP Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1701 Manuel utilisateur

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manuel utilisateur

Fujitsu

Fujitsu RC25 Manuel utilisateur

I-Tech

I-Tech RKP115 Manuel utilisateur

iTech Company

iTech Company AMil-1900-D12e-AC Manuel utilisateur

Raloy

Raloy Slim 1U Rackmount Manuel utilisateur

MAVIS

MAVIS Falsterbo Chest Of Drawers Manuel utilisateur