ACME LP-TS200 CW Manuel utilisateur
LP-TS200 CW
LP-TS200 WW
User Manual
Please read the instruction carefully before use
CONTENTS
1. Safety Instructions..........................................................................................2
2. Technical Specifications..................................................................................4
3. Accessories.....................................................................................................5
4. The Plate for Color Filter & Barn Door Installation .........................................6
5. How To Set The Unit.......................................................................................7
5.1 Control panel............................................................................................7
5.2 Main Functions.........................................................................................8
6. How to Control the Unit ...............................................................................12
6.1 Master/Slave Function ...........................................................................12
6.2 DMX Controller ......................................................................................12
6.3 DMX 512 Configurations ........................................................................13
7. DMX 512 Connections..................................................................................13
8. Troubleshooting ...........................................................................................14
9. Fixture Cleaning ...........................................................................................15
1C
1. Safety Instructions
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
All fixtures are intact from the manufacturer, please operate follow up the user manual,
artificial fault are not under guarantee repair.
Please unpack and check carefully that there is no transportation damage before using the
unit.
The unit is for indoor use only. Use only in a dry location.
Please install and operate by operator.
Please use safety chain when fixes the unit. DO NOT handle the unit by taking its head only,
but always by taking its base.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
Be sure to locate the unit in a place away from adjacent surfaces at least 1M.
Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
Maximum ambient temperature TA: 40℃. DO NOT operate it where the temperature is higher
than this.
Unit’s surface temperature may reach up to 85℃. DO NOT touch the housing bare-handed
during its operation, and allow about 15 minutes for cooling the unit down before replacing
bulb or maintenance as it could be very hot.
DO NOT connect the device to any dimmer pack.
Please read the instruction carefully, it includes important
information about the installation, usage and maintenance.
2C
Please make sure there are no flammable materials close to the unit while operating, as it is
fire hazard.
Please look over power wires carefully, replace immediately if there is any damage.
Never run on for a long time lest shortening lifespan.
Please avoid any inflammable liquids, water or metal objects entering the unit. Once it
happened, cut off the mains power immediately.
DO NOT operate in dirty and dusty environment, also cleaning fixtures regularly.
DO NOT allow children to operate the fixture.
DO NOT touch any wire during operation as there might be a hazard of electric shock.
Please avoid power wires twist other cables.
Please disconnect mains power before fuse/lamp replacement or servicing.
Please replace fuse only with the same type.
In the event of serious operating problem, stop using the unit immediately.
Never turn on and off the unit time after time.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
DO NOT open the unit as there are no user serviceable parts inside.
Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
Please disconnect the mains power if the fixture is not used for a long time.
DO use original packing materials once transport it again
DO NOT look directly at the LED light beam while the fixture is on.
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to
which you are attaching the unit is secure and is able to support a weight of 10 times of the
unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit
when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of
the touch of people and has no one pass by or under it.
Note: the range of mounting height is 0~30 meters.
3C
2. Technical Specifications
DMX512 control: 2 channels (Dimmer, Zoom).
Focus: Automatic focus by DMX control
Dimmer: 0 ~ 100%
Beam Angle: 12 ° ~ 40 °
Color Temperature: 5600+200K (LP-TS200 CW)
3200+200K (LP-TS200 WW)
Rotating filter and hanger
Thermo-optical cooling technology with quiet
Suitable for theaters, studios, retail stores, and other similar locations.
Power supply: AC 100~240V, 50/60Hz
Power consumption: 226W
Physical temperature: <56 ° C
Working life: 50,000 hours
CRI: Ra>=90
Weight: 19.3Kgs
Dimension: 438×368.7×624.1mm
400
438
368 7.
344.6
512.2
624.1
111 9.
4C
Photometric Diagram:
3. Accessories
Standard Accessories
Simple Bracket
Optional Accessories
Adjustable Bracket
5C
4. The Plate for Color Filter & Barn Door Installation
Fig 1
At first, please push the Lock Cap by hand as the arrow ○
1E A, and move away the Lock as the
arrow A○
2E A; Then insert the Plate for Color Filter into the inside slot from topside;
Fig 2
Secondly, please insert the Barn Door into the outside slot from topside as arrow A○
3E A,and fasten
the lock (Note: the Barn Door must be fastened into the inside of the lock’s hook ); then flip down
the lock cap again as arrow A○
4E A;
Finally, as arrow A○
5E A, please fasten the safety cable in the iron coils of Barn Door.
6C
5. How To Set The Unit
5.1 Control panel
1
23
4
5
6
7
891112
1. Display:
Show the various menus and the selected functions
2. LED:
DMX On DMX input present
POWER On Power On
3. Button:
MENU To select the programming functions
DOWN To go backward in the selected functions
UP To go forward in the selected functions
ENTER To confirm the selected functions
4. Zoom: Manual adjust the zoom value.
5. Dimmer: Manual adjust the dimmer value.
6. Power Switch:
Used to turn On/Off the fixture.
7. Fuse(T 5A):
Used to protect the unit from damage of the over current.
7C
8. Power Cable:
Used to connect the main power supply.
9. DMX input:
For DMX512 link, use 5-pin XLR cable to link the unit together.
10. DMX output:
For DMX512 link, use 5-pin XLR cable to link the unit together.
11/12. Ethernet Connectors:
Used to transfer fixture’s information to a main controller.
5.2 Main Functions
To select any functions, press the MENU button until the required one is shown on the display.
Select the function by ENTER button and the display will blink. Use the DOWN and UP button to
change the mode. Once the required mode has been selected, press the ENTER button to setup or
it will automatically return to the main functions without any change after idling one minute. Back
to the functions without any change press the MENU button.
The main functions are shown below:
8C
DMX Address
Select DMX Address, press the ENTER button to confirm, the present address will blink on the
display. Use the UP and DOWNbutton to adjust the DMX address from 1to 512. Once the address
has been selected, press the ENTER button to save. Hold and press the MENU button about one
second or wait for one minute to exit the menu mode.
9C
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ACME Matériel de DJ
ACME
ACME CHEETAH LED-GF50 Manuel utilisateur
ACME
ACME LED-ST1000 Manuel utilisateur
ACME
ACME CA-DD12 II Manuel utilisateur
ACME
ACME LED WAVE 100 Manuel utilisateur
ACME
ACME iMove 50SR Manuel utilisateur
ACME
ACME FURY LED RGB Manuel utilisateur
ACME
ACME MH-275R Manuel utilisateur
ACME
ACME MH-575S Manuel utilisateur
ACME
ACME MH-600A Mobile Color Manuel utilisateur
ACME
ACME Ellipsoidal 10 DMX Manuel utilisateur
ACME
ACME Stage Panel 1080 Manuel utilisateur
ACME
ACME GENESIS COLOR II Manuel utilisateur
ACME
ACME XP-1200F Manuel utilisateur
ACME
ACME Color Par 36 Manuel utilisateur
ACME
ACME Dotline 360 Manuel utilisateur
ACME
ACME AE-610 BEAM Manuel utilisateur
ACME
ACME E-10C WW DXX Manuel utilisateur
ACME
ACME MINI ELLIPSOIDAL 10 Manuel utilisateur
ACME
ACME E-200 MB MC Manuel utilisateur
ACME
ACME FARANDOLE AM-BAR Manuel utilisateur
Manuels Matériel de DJ populaires d'autres marques
thomann
thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur
Eagletone
Eagletone 6 Eyes Flower Manuel utilisateur
EuroLite
EuroLite FLD-1508 Manuel utilisateur
Technical Pro
Technical Pro LG8xSEA Manuel utilisateur
JB Systems
JB Systems Lounge Laser DMX Manuel utilisateur
Lightmaxx
Lightmaxx Vega Halo 90 Manuel utilisateur
Elation
Elation FUZE WASH Z350 Manuel utilisateur
Maverick
Maverick MK3 WASH Manuel utilisateur
Infinity
Infinity TF-260C7 Fresnel Manuel utilisateur
Chauvet
Chauvet EVE E-50Z Manuel utilisateur
Eliminator Lighting
Eliminator Lighting E 138 Manuel utilisateur
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur