Acer PD100 Manuel utilisateur
PD100 / PD120
Service Guide
PRINTED IN TAIWAN
Service guide files and updates are available
on the AIPG/CSD web; for more information,
please refer to http://csd.acer.com.tw
II
Revision History
Please refer to the table below for the updates made on PD100 / PD120 service guide.
Date Chapter Updates
III
Copyright
Copyright ©2005byAcer Incorporated. All rightsreserved. No part of thispublication may bereproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without
the prior written permission of Acer Incorporated.
Disclaimer
The information in this guide is subject to change without notice.
Acer Incorporated makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties of merchantability or fitness for any particular
purpose. Any Acer Incorporated software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not Acer Incorporated, its distributor, or its
dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software.
Acer is a registered trademark of Acer Corporation.
Intel is a registered trademark of Intel Corporation.
Pentium 4 and Celeron are trademarks of Intel Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective holders.
IV
Conventions
The following conventions are used in this manual:
Screen messages Denotes actual messages that appear
on screen.
NOTE Gives bits and pieces of additional
information related to the current
topic.
WARNING Alerts you to any damage that might
result from doing or not doing specific
actions.
CAUTION Gives precautionary measures to
avoid possible hardware or software
problems.
IMPORTANT Reminds you to do specific actions
relevant to the accomplishment of
procedures.
V
Preface
Before using this information and the product it supports, please read the following general information.
1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION
decided for Acer's "global" product offering. To better fit local market requirements and enhance product
competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered
in this generic service guide. In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.
2. Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made, it will
not be noted in the printed Service Guide. For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer
office may have a DIFFERENT part number code to those given in the FRU list of this printed Service
Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and
service of customer machines.
Table of Contents
Chapter 1System Introduction 1
Technical Specification 1
ProductOverview 2
System Block Diagram 6
Chapter 2Firware Upgrade 7
Equipment Needed 7
InstallationProcedure 8
Firmware Upgrade Procedure 12
EDIDUpgrade 15
Equipment Needed 15
Setup Procedure 16
EDID Key-in Procedure 16
Chapter 3Mechanical Disassembly and Reassembly 19
Equipment Needed 19
GeneralInformation 19
Mechanical Disassembly Procedure 20
Mechanical Reassembly Procedure 33
Chapter 4Troubleshooting 46
Equipment Needed 46
LED Lighting Message 46
Main Procedure 47
Function Test and Alignment Procedure 49
Product / Test Equipment / Test Condition 49
InspectionProcecdure 50
Guide to Entering Service Mode and Factory Reset (PD100) 53
Chapter 5Exploded Overview 54
Exploded Overview 54
Appendix Serial Number Definition System 80
I. Serial Number System Definition 80
II. PCBA Code Definition 81
III. The Different Parts between PD100 and PD120 82
1Chapter1
System Introduction
Technical Specification
Item Description
Dimensions (WxHxD) 230 x 122.8 x 238 mm
Weight Approx. 4.85 lbs (2.2 Kg)
Tilt Angle 7 degree with elevator mechanism
Keystone correction +/-16 degree (32 degree) (Horizontal)
Lamp Door Projection Lamp power supply shut off automatically when door open
Power Supply
Universal AC 100-240V ~ 50-60Hz with PFC input
200W for Philips UHP Lamp @ normal operation
Variance FAN speed control
(Depends on temperature variant)
Projection Lens F#2.7~3.0, f=21.83mm~23.81mm, 1.10X Mechanical Zoom Lens
Throw Distance 1.5m - 10m (Optical Performance)
1.5m - 12m (Mechanical Travel)
Brightness 1700 ANSI Lumens (Typical; Full Power Mode)
1170 ANSI Lumens (Typical; Eco Mode)
1300 ANSI Lumens (Engineering Minimum; Full Power Mode)
Contrast 1000 : 1 Full White and Black (Minimum; Full Power Mode)
1800 : 1 Full White and Black (Typical; Full Power Mode)
Uniformity 65% Japan standard (Minimum; Full Power Mode)
80% Japan standard (Typical; Full Power Mode)
Temperature Opterating : 5~35oC
Storage : -20~60oC
Maximum Humidity Operating : -5~35oC, 80%RH (Max.), non-condensing
Storage : -20~60oC, 80%RH (Max.), non-condensing
Acoustic noise level
38 dB(A) (Typical, Under 23 +/- 20C; Full Power Mode without DVD/wireless)
30 dB(A) (Typical, Under 23 +/- 20C; Eco Mode without DVD/wireless)
Noise measurement follows ISO7779, A-weighted sound pressure level
measurement, 7200 rpm color wheel rotational speed
Lamp Life 1500 hours min, 50% survival rate (Full Power Mode)
2000 hours min, 50% survival rate (Eco Mode)
Altitude
Operating : 0~2,500 ft for 5 oC~35oC
2,500~5,000 ft for 5 oC~30oC
5,000~10,000 ft for 5 oC~25oC
Storage : 40,000 ft (Max.)
MTBF Operating more than 12,000 hours (90% Confidence Level)
Chapter1
Chapter1 2
Product Overview
Main Unit
Item Description
1Focus Ring
2Zoom Ring
3Zoom Lens
4Elevator Button
5Elevator Foot
6Remote Control Receiver
7Connection Ports
8Power Socket
9Control Panel
3Chapter1
Control Panel
Item Description
1Lamp Indicator LED
2Temp Indicator LED
3Power / Standby and Indicator LED (Power LED)
4Source
5Resync
6Four Directional Select Keys
7Menu
Chapter1 4
Connection Ports
Item Description
1DVI Input Connector (for Digital signal with HDCP function)
(Optional)
2PC Analog Signal / HDTV / Component Video Input Connector
3Audio Input Connector
4S-Video Input Connector
5Monitor Loop-through Output Connector
6USB Connector
7Remote Control IR Receiver
8Composite Video Input Connector
9KensingtonTM Lock Port
10 5V DC Output Jack (dfor attached dongle device) (for PD100 only) (for PD120 only)
Autres manuels pour PD100
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Acer Projecteur
Acer
Acer H5360 Series Manuel utilisateur
Acer
Acer H6536BD Manuel utilisateur
Acer
Acer P1101C Series Manuel utilisateur
Acer
Acer P1266 Series Instructions d'utilisation
Acer
Acer S1200 Series Manuel utilisateur
Acer
Acer P5403 series Manuel utilisateur
Acer
Acer XL2520 Manuel utilisateur
Acer
Acer K330 Manuel utilisateur
Acer
Acer P1166 Series Manuel utilisateur
Acer
Acer M459i Series Manuel utilisateur
Acer
Acer A1200 Series Manuel utilisateur
Acer
Acer 7763PA - PalmPro SVGA DLP Projector Manuel utilisateur
Acer
Acer UL5630 Series Manuel utilisateur
Acer
Acer K330 Manuel utilisateur
Acer
Acer PE-S42 Manuel utilisateur
Acer
Acer K731 Series Manuel utilisateur
Acer
Acer K130 Series Manuel utilisateur
Acer
Acer V9800 Manuel utilisateur
Acer
Acer P7203/P7205/P7200i Manuel utilisateur
Acer
Acer S1210 Series Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
