Abocom SW2400M Manuel utilisateur

M73-APO07-460

24-PortFastEthernetSwitch

QuickInstallationGuide

FCC REGULATORY STATEMENTS

FCC Certification, Part15, Class A

This equipment has been tested and found to comply with the limits for a class A Digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and usedin accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own

expense.

CE Mark Warning

This is a Class Aproduct. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures

-1-

INTRODUCTION

The 24-Port Fast Ethernet 10/100Mbps N-Way Switch provides you a flexible, reliable,

and affordable solution for an Ethernet network. It comes with twenty-four independent

10BASE-T/100BASE-TX ports. Each port delivers up to 200Mbps throughput, and is

able to operate in either half or full-duplex modes.

The 24-Port Fast Ethernet 10/100Mbps N-Way Switch also possesses a N-Way auto-

negotiation function, which automatically adjusts the device for optimum operation.

“Store-and-Forward” architecture filters eliminate error packets and improve efficiency.

Plus, based on Auto-MDI/MDIX technology, you are able to use either a straight through

or a crossover Ethernet cable to connect with other devices. Moreover, the built-in

Universal Power Supply allows you to install the switch easily without any external

power adapter.

Key Features

•Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards

•Supports twenty four 10M/100M auto-detect Half/Full duplex switch ports

•Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full

•Supports Back Pressure function for Half Duplex operation in case buffer is full

•All ports support Auto-negotiation

•Supports source/ destination MAC address lookup and aging with 8K MAC address

(4K entries each entry table)

•Store-and-Forward switching operation

•No-head-of-line blocking system support

•Broadcast storm prevention

•Built in Universal Power Supply: 90~264V

•Emission certification: FCC Class A, CE mark

-2-

PARTS NAMES AND FUNCTIONS

Front Panel: LED Indicators

Status

LED Color Solid Flashing

Power Green Becomes

solid green when power is

turned on. N/A

LINK/ACT

Green Successful connection

Sending or Receiving

packets

Rear Panel: Power Port

-3-

HARDWARE INSTALLATION

The switch is considered as a “plug and play” network device and requires no special

setup procedures. Connect the power cord and cables correctly and you are ready to go.

Switch installation

1. Put the switch on the appropriate location. When you install the switch, there are

two things needed to be considered:

ŸLocation: Your switch should be located in a place that is central to your

home/office space and allows all computers and networked devices connected to

your switch.

ŸPower: Remember to locate your switch near electrical outlet.

2. Power on the switch by connecting the power cord.

3. Verify if the power (POWER) LED is on. If the POWER LED does not light up,

check the power cord and power outlet to verify its connection. If it still remains

unlit, please contact your dealer for support.

Ethernet Port Connection

Connect user machines, servers, another switch, hub, or any other devices to the Ethernet

ports on this switch with either straight through or crossover Ethernet cables.

-4-

SPECIFICATION

Standards IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE802.3x Flow Control

Protocol CSMA/CD

Ports Twenty four 10/100Mbps RJ-

45 Ports (support

Auto-MDI/MDIX)

Switching Scheme

Store-and-Forward

Flow control Full Duplex: IEEE802.3x

Half Duplex: Back Pressure

Cabling type UTP Category 3 or better (10Base-T)

UTP Category 5 or better (100Base-TX)

MAC Address 8K

LED indicators Power Green

Link/Act Green: on for successful connection,

flashing for activity

Physical

Dimension 438 x 184 x 44mm3(Width x Depth x Height)

Weight 1.9 kg

Input power

specifications AC 90~264V, 50~60Hz

Power

Consumption 5.3 W

Agency and

Regulatory FCC Class A, CE mark

Operating

Temperature 0°C to 40°C

Operating Humidity

5~90% non-condensing

Table des matières

Autres manuels Abocom Routeur réseau

Abocom

Abocom PL1000 Manuel utilisateur

Abocom

Abocom HSM1402 Manuel utilisateur

Abocom

Abocom WR5207 Manuel utilisateur

Abocom

Abocom SW800AE Manuel utilisateur

Abocom

Abocom SW1600B Manuel utilisateur

Abocom

Abocom WAP2101 Manuel utilisateur

Abocom

Abocom PLS485 Manuel utilisateur

Abocom

Abocom HomePlug 1.0 Turbo Ethernet Adapter PLE0085 Manuel utilisateur

Abocom

Abocom HomePlug AV Ethernet Bridge PLE0200 Instructions d'utilisation

Abocom

Abocom VDSL to Ethernet Bridge VE1000 Manuel utilisateur

Abocom

Abocom WR5205 Manuel utilisateur

Abocom

Abocom SW800 Manuel utilisateur

Abocom

Abocom CAS2042 Manuel utilisateur

Abocom

Abocom CAS1040 Manuel utilisateur

Abocom

Abocom WR104 Manuel utilisateur

Abocom

Abocom WR5205G Manuel utilisateur

Abocom

Abocom P3102-4g Manuel utilisateur

Abocom

Abocom WBA580 Manuel utilisateur

Abocom

Abocom WBR480 Manuel utilisateur

Abocom

Abocom UPA 200Mbps 802.11b/g AP/Router PLAR32 Manuel utilisateur

Abocom

Abocom SW800AI Manuel utilisateur

Abocom

Abocom PLS322 Manuel utilisateur

Abocom

Abocom PLS342 Manuel utilisateur

Abocom

Abocom WR5502 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité