ABBA STB09 Manuel utilisateur

STB09

www.ABBALightingUSA.com

INSTALLATION GUIDE

IMPORTANT SAFETY INSTRUCTIONS

LIGHTEN LAMP IS HOT!

WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:

Please exercise caution when using the lamp, as it tends to HEAT up rapidly.

We recommend taking necessary safety measures to ensure optimal usage.

For your safety, please refrain from touching the HOT lens, guard, or enclosure.

We recommend waiting for the product to cool down before handling it.

To prevent any fire hazards, please ensure that the lamp is kept away from

materials that may easily catch fire. We appreciate your cooperation in

maintaining a safe and secure environment.

RATED VOLTAGE 12V AC/DC

Congratulations on your purchase of this high-quality product! We want to ensure

that you have the best possible experience with it, so we kindly ask that you take a

moment to carefully read and follow all instructions before assembly, installation,

and use. By doing so, you'll not only guarantee correct function and safety, but also

optimize the full potential of this exceptional product. Thank you for choosing us as

your trusted provider of top-notch products - we truly appreciate your business!

WARRANTY

We stand behind the quality of our product and offer a 5-year warranty from the date of purchase.

Please note that the warranty is valid from the date of purchase, not from the date of installation.

Kindly ensure that you keep the proof of purchase as it will be required for any warranty claims.

Warranty will be void if there is any damage due to improper usage or

modification to the fixture.

Failure to comply with the instruction in this manual may increase the risk of

damage or injury and will void warranty.

For safety reasons, we recommend that only a qualified professional install

this electrical product.

Before attempting to install this unit, ensure all power connections are off for

your own safety.

www.ABBALightingUSA.com

Do not instal within 10 feet of a pool, spa or fountain

CAUTION:

fixture(s) must be installed in accordance with all local codes and ordinances.

INSTALLATION INSTRUCTION

www.ABBALightingUSA.com

To ensure optimal performance and safety,

it is important to use our fixtures ONLY with

a low voltage landscape transformer. This

transformer reduces the voltage from 120V

to 12V, making it safe and suitable for

outdoor use.

When installing the fixture(s), please follow

these instructions carefully:

1.Before installation, please ensure that

the power is turned off for your safety.

2.To unlock or open the fixture, rotate it

in a clockwise direction.

3.To ensure a proper installation of the

fixture, it is necessary to diligently create a

hole on the wall that corresponds to the

size of the wires. This will allow you to route

the wires towards the main line connection.

To do this, use a drill bit or hole saw that is

the same diameter as the wires. Make sure

to measure and mark the hole accurately

beforehand. Once the hole are made, you

can proceed to install.

3. Attach the wires from the fixture(s) to

the main cable, For best results, we

recommend using WN12 waterproof wire

nuts (which are sold separately) to ensure

optimal connectivity and protection

against dust, moisture and water damage.

Simply thread the wires through the wire

nut and twist it until it is securely in place.

4. Remember to test the fixture after

making any adjustments to ensure it is

functioning correctly and that the lighting

is set to your preferences.

5.To mount the fixture, start by passing

the provided mounting screws through

both the housing of the fixture. Then,

align the fixture in the wall and lower it

down so that the screws are positioned .

Next, carefully guide the screws down

making sure they are properly seated and

aligned. Use a screwdriver to tighten the

screws until the fixture is securely

attached to the wall.

Be sure to check that the fixture is level

and flush with the wall surface. If

necessary, adjust the position of the

fixture by loosening the screws and

repositioning it before retightening.

6.Once the fixture(s) have been installed

securely,To insert the lightbulb, place it into

the fixture, and to secure or close the fixture,

rotate it in a counterclockwise direction. it's

time to turn on the power and enjoy the

enhanced lighting experience! Locate the

power switch or breaker that controls the

fixture(s) and turn it on.

Take a moment to observe the lighting effect

Remember to regularly maintain and clean

the fixture(s) to ensure optimal performance

and longevity. Refer to the manufacturer's

instructions for specific details on how to

care for your particular fixture.

www.ABBALightingUSA.com

MAIN LINE

WN12

Attach the wires from

the fixture(s) to the

main cable, For best

results, we recommend

using WN12

waterproof wire nuts

(which are sold

separately)

1.82”

DIAMETER: 3.35"

Table des matières

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur