ABB SM500F Manuel utilisateur

—

ABB MEASUREMENT & ANALYTICS | INSTRUCTION | IN/RANDC/007-EN REV. A

SM500F

Field mountable paperless recorder

Battery replacement

Measurement made easy

1 Introduction

This publication details replacement of the battery

(B12454) fitted to the processor board of the

SM500F Paperless recorder. The procedure must be

carried out by a trained technician.

Tools required

• T8 Torx driver

2 For more information

Further information is available from:

www.abb.com/recorders

or by scanning these codes:

Sales Service

3 Safety

IMPORTANT NOTE

Dispose of the old components as detailed in the

instruction manual (IM/SM500F).

SM500F

field mountable

paperless recorder

2 IN/RandC/007-EN Rev. A | SM500F | Paperless recorder | Battery replacement

4 Replacing the battery

1. Isolate the recorder from the power supply.

Referring to Fig. 4.1:

2. Unlock the door with the key (if required) A, press release

catch Band open the door.

Referring to Fig. 4.2:

3. Use a T8 Torx driver to remove 6 Torx screws Csecuring

the door assembly rear cover and remove the rear cover.

Referring to Fig. 4.3:

4. Disconnect processor board flexi-cable D, display

flexi-cable Ekeypad membrane cable Fand inverter

cable (if fitted) Gfrom the processor board. Lift out and

discard the processor board.

5. Turn the processor board over.

Referring to Fig. 4.4:

6. Remove battery Hand insert replacement.

Referring to Fig. 4.3:

7. Position the processor board in the door housing and

reconnect inverter cable G(color recorders only – if fitted)

keypad membrane cable F, display flexi-cable Eand

processor board flexi-cable D.

Referring to Fig. 4.2:

8. Refit the door assembly rear cover and use a T8 Torx driver

to secure 6 Torx screws C.

9. Close and lock the door.

10. Restore the recorder's power supply.

CAUTION – Property damage

The recorder is vulnerable to electrostatic damage.

Wear an anti-static strap or place the instrument on

an anti-static workbench.

Fig. 4.1 Opening the door

Fig. 4.2 Removing the rear cover

Fig. 4.3 Disconnecting / removing the processor board

Fig. 4.4 Replacing the battery

SM500F | Paperless recorder | Battery replacement | IN/RandC/007-EN Rev. A 3

5 Setting the time and date

1. Enter the Configuration level of the SM500F.

2. Enter password (if required) and select Edit current

configuration.

3. Select the Common configuration parameter:

The Common Configuration menu is displayed:

4. Use the arrows to highlight the Time tab:

5. Press the key to select the Date and time

parameter.

A warning dialog is displayed:

6. Press .

The Date and time menu is displayed:

7. Set the required time and date.

8. Once finished, press and exit and save the

configuration as normal.

Important note

Once the battery has been removed, the battery failed

icon is displayed on the front panel of the unit. To

restore normal operation, the correct time and date must

set.

Important note

Changing the time will potentially cause loss of

data. Ensure that all data archiving is up to date

before proceeding.

IN/RandC/007-EN Rev. A 12.2018

—

We reserve the right to make technical changes or modify the contents of this document

without prior notice. With regard to purchase orders, the agreed particulars shall prevail.

ABB does not accept any responsibility whatsoever for potential errors or possible lack of

information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained

therein. Any reproduction, disclosure to third parties or utilization of its contents – in

whole or in parts – is forbidden without prior written consent of ABB.

—

ABB Limited

Measurement & Analytics

Howard Road, St. Neots

Cambridgeshire, PE19 8EU

Tel: +44 (0)0870 600 6122

Fax: +44 (0)1480 213 339

Email: instrumen[email protected]om

ABB Inc.

Measurement & Analytics

125 E. County Line Road

Warminster

PA 18974

USA

Tel: +1 215 674 6000

Fax: +1 215 674 7183

abb.com/measurement

Autres manuels pour SM500F

Autres manuels ABB Instrument de mesure

ABB

ABB AquaProbe 2 Manuel utilisateur

ABB

ABB AnalyzeIT AX460 Manuel utilisateur

ABB

ABB Aztec AWT440 Manuel de formation

ABB

ABB 4690 Series Manuel

ABB

ABB AX400 Series Manuel utilisateur

ABB

ABB NGC Series Manuel utilisateur

ABB

ABB AX410 Manuel utilisateur

ABB

ABB Smart Manuel utilisateur

ABB

ABB Relion RES670 Manuel utilisateur

ABB

ABB SPEF 3A2 C Manuel de la liste des pièces

ABB

ABB SM1000 Manuel utilisateur

ABB

ABB AWT210 Manuel utilisateur

ABB

ABB TMD-T4 Manuel utilisateur

ABB

ABB WaterMaster Manuel utilisateur

ABB

ABB Endura AZ20 series Manuel utilisateur

ABB

ABB 7651 Manuel utilisateur

ABB

ABB EL3060 Series Guide de l'utilisateur

ABB

ABB Relion 670 series Guide de démarrage rapide

ABB

ABB CoriolisMaster FCB330 Manuel d'installation et d'exploitation

ABB

ABB GLA451 Manuel utilisateur

ABB

ABB LS4000 Manuel utilisateur

ABB

ABB SensyMaster FMT230 Manuel d'installation et d'exploitation

ABB

ABB RATOSIGHT 10A2235 Manuel utilisateur

ABB

ABB Endura AZ40 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur