ABB C11 Manuel utilisateur
C11
User Manual
C11
User Manual
Document ID: 2CMC486001M0201
Revision: D
2020-10-01
Disclaimer The information in this document is subject to change without notice and should
not be construed as a commitment by ABB Spa. ABB Spa assumes no responsi-
bility for any errors that may appear in this document.
In no event shall ABB Spa be liable for direct, indirect, special, incidental or con-
sequential damages of any nature or kind arising from the use of this document,
nor shall ABB AB be liable for incidental or consequential damages arising from
use of any software or hardware described in this document.
Copyrights This document and parts thereof must not be reproduced or copied without written
permission from ABB Spa, and the contents thereof must not be imparted to a
third party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
© Copyright 2020 ABB Spa. All rights reserved.
Trademarks ABB Spa is a registered trademark of the ABB Group. All other brand or product
names mentioned in this document may be trademarks or registered trademarks
of their respective holders.
Contact ABB SPA
via Dell'industria 18
20009 - Vittuone - Milano
Italy
Tel: +39 02 2415 0000
Table of Content
Table of Content
1 About this Manual ........................................................................................ 3
2 Product Overview ......................................................................................... 5
3 Installation .................................................................................................... 9
3.3.1 Wiring Diagrams ................................................................................................ 13
3.3.1.1 Outputs/inputs ....................................................................................... 13
4 User Interface ............................................................................................. 15
5 Meter Settings ............................................................................................ 21
6 Technical Description ................................................................................ 27
7 Technical data ............................................................................................ 33
8 Troubleshooting ......................................................................................... 37
9 Service & Maintenance .............................................................................. 39
1
Table of Content
2
About this Manual
Chapter 1: About this Manual
Overview This chapter describes the conventions used in this manual. It also contains expla-
nations and definitions of terms and definitions that are used in the document.
In this chapter The following topics are covered in this chapter:
1.1 Conventions Used in this Document ..................................................... 4
3
About this Manual
1.1 Conventions Used in this Document
Symbols This document contains warning, caution, note and tip icons that point out safety
related conditions and other important or useful information.
Symbol Description
The electrical warning icon indicates the presence of a hazard which
could result in electrical shock.
The caution icon indicates important information or a warning related
to the concept discussed in the text. It might indicate the presence of a
hazard which could result in corruption of software or damage to equip-
ment or property.
The note icon alerts the reader to important facts and conditions.
The tip icon gives the reader useful information related to the concept
discussed in the text.
4
Product Overview
Chapter 2: Product Overview
Overview This chapter describes the parts of the meter. It also contains information about
the meter type.
In this chapter The following topics are covered in this chapter:
2.1 Meter Parts ............................................................................................ 6
2.2 Meter Type ............................................................................................ 7
5
Product Overview
2.1 Meter Parts
Illustration The parts of the meter are shown in the illustration below:
Parts description The following table describes the parts of the meter:
20 21
4
9
2
8
1
6
5
3
7
6
8
Item Description Comments
1 DIN-lock To fasten the meter on the DIN-rail.
2 Output Terminal connections for the output.
3 Push button For programming and reading metering
data.
4 LED Flashes in proportion to the energy con-
sumed.
5 Display LCD for meter reading
6 Sealing points Seal thread can be used to seal the
cover.
7 Sealable terminal cover Sealable cover to protect the terminal
blocks.
8 Terminal blocks Terminal for all voltages and currents.
9 Product label Contains information about the meter
type.
6
Table des matières
Autres manuels ABB Instrument de mesure
ABB
ABB Smart Manuel utilisateur
ABB
ABB 10D1477 Manuel utilisateur
ABB
ABB LWT300 series Manuel utilisateur
ABB
ABB ICOS GLA151 Series Manuel utilisateur
ABB
ABB ADS420 Manuel utilisateur
ABB
ABB FSM4000 Series Manuel utilisateur
ABB
ABB NGC8200 Manuel utilisateur
ABB
ABB EasyLine Series Guide de l'utilisateur
ABB
ABB EV1 Manuel utilisateur
ABB
ABB Aztec 600 Manuel utilisateur
ABB
ABB AX411 Manuel utilisateur
ABB
ABB CoriolisMaster FCM2000 Manuel de formation
ABB
ABB Sensyflow FMT400-VTS Manuel utilisateur
ABB
ABB SensyMaster FMT430 Manuel utilisateur
ABB
ABB NETA-21 Manuel d'installation
ABB
ABB GLA132 Series Manuel utilisateur
ABB
ABB Relion 670 series Guide de démarrage rapide
ABB
ABB C1900 Series Manuel utilisateur
ABB
ABB FEF series Manuel utilisateur
ABB
ABB PFCL 201 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur