ABB Arc Guard System TVOC-2-COM Feuille d'instructions

—

Arc Guard System™ – TVOC-2-COM Modbus

Configuration manual

—

1SFC170017M0201 EN, REV C

Arc Guard System™ – TVOC-2-COM

Modbus configuration manual

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

Thank you for selecting this ABB TVOC-2 Arc Guard

System™. Carefully read and make sure that you

understand all instructions before you mount, connect,

configure the Arc Guard System.

This manual is intended for configuration of the TVOC-2-

COM Modbus interface.

The manual is available on:

http://new.abb.com/low-voltage/products/arc-guard

• Only authorized and appropriately trained personnel

are allowed to install and make the electrical

connection of the Arc Guard System in accordance with

existing laws and regulations.

• Only authorized personnel are allowed to do service

and repair on the Arc Guard System.

• Unauthorized repair will effect the warranty.

• This manual is a part of the TVOC-2 Arc Guard System.

Always keep this manual available when working with

the TVOC-2 Arc Guard System.

• Examine the Arc Guard System and the package when

you unpack your new product. If there are damages,

please contact the transportation company or the ABB

reseller/office immediately.

Safety notes

In this user manual, these symbols are used:

WARNING

General warning symbol indicates the presence

of a hazard which could result in personal injury

and damage to equipment or property.

WARNING

Warning symbol indicates the presence of

hazardous voltage which could result in personal

injury.

INFORMATION

Information sign alerts the reader to relevant

facts and conditions.

Modications to data in this manual can be applied without

notice.

General safety information

WARNING

Only authorized and appropriately trained

personnel are allowed to install and make the

electrical connection of the Arc Guard System in

accordance with existing laws and regulations.

WARNING

Examine the Arc Guard System and the package

when you unpack your new product. If there are

damages, please contact the transportation

company or the ABB reseller/office immediately.

WARNING

Only authorized and appropriately trained

service personnel are allowed to do service

and repair on the Arc Guard System. Note:

unauthorized repair will effect the warranty.

Personal

Service and repair should be performed

by authorized personnel only. Note that

unauthorized repair affects safety and warranty.

—

Read this first

Warning and safety

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

—

Arc Guard System™

TVOC-2-COM Modbus

Configuration manual

GENERAL

INFORMATION

P. 7

TROUBLESHOOTING

P. 33

MODBUS

INSTALLATION

P. 11

CHANGING MODBUS ID

AND COMMUNICATION

PARAMETERS

P. 15

FUNCTIONAL

DESCRIPTION

P. 19

01010203040506

INDEX

P. 36

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGURATION MANUAL 7

8 1.1 Introduction

8 1.2 references

8 1.3 Quick start-up

—

1 General information

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

8ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGURATION MANUAL

1.1 Introduction

This manual covers the Modbus interface, which offers

a direct connection to Modbus-RTU for the Arc Guard

System™ TVOC-2.

TVOC-2-COM will behave as a slave. This means all

communication will be performed by a master device on

the same Modbus system. Mostly this will be a PLC. This

manual explains how to install the Arc Guard System™

TVOC-2-COM to your Modbus system.

1.2 References

[1] http://www.modbus.org/docs/Modbus_Application_

Protocol_V1_1b3.pdf (2012)

[2] http://www.modbus.org/docs/Modbus_over_serial_

line_V1_02.pdf (2006)

[3] https://www.modbusdriver.com/modpoll.html

1.3 Quick start-up

1Make sure your Modbus master has been installed to

the system.

2The TVOC-2-COM will be delivered with the following

configuration:

• baud rate 19200

• parity even

• stop bits 1

• Modbus ID 248*

*Modbus ID 248 is not a valid id for a Modbus system but is used to indicate that the

communication is disabled.

3Physically connect the system to the Modbus network.

4Test communication between your master and

the TVOC-2 system. For example see chapter 5

Troubleshooting.

Figure 1

Quick start-up

Master

present

START

Set Modbus

id of TVOC-2

Connect

TVOC-2

System

Test

Ready

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGURATION MANUAL 9

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

Table des matières

Autres manuels ABB Électricité industrielle

ABB

ABB Tmax XT XT3 Instructions d'installation

ABB

ABB ACS 800 Series Manuel utilisateur

ABB

ABB ILTS-E Series Manuel utilisateur

ABB

ABB Relion 615 series Fiche technique

ABB

ABB EBS852 Manuel utilisateur

ABB

ABB UZE Manuel utilisateur

ABB

ABB SACE PR021/K Manuel utilisateur

ABB

ABB ACS880-107 Manuel utilisateur

ABB

ABB TMAX XT XT2 THERMOMAGNETIC Instructions d'installation

ABB

ABB VSC Manuel utilisateur

ABB

ABB MSOX Manuel utilisateur

ABB

ABB SACE Emax 2 Manuel utilisateur

ABB

ABB HT588230 Manuel utilisateur

ABB

ABB Sace Tmax XT XT5 THERMOMAGNETIC Instructions d'installation

ABB

ABB SACE Emax 2 Manuel utilisateur

ABB

ABB ACS 800 Series Manuel utilisateur

ABB

ABB NPSwitch NPS 24 B 108 Manuel utilisateur

ABB

ABB GSC Series Manuel du produit

ABB

ABB Emax VF Guide rapide

ABB

ABB TPS44-H32 Manuel utilisateur

ABB

ABB V-Contact VSC Series Guide rapide

ABB

ABB Relion 670 series Guide de l'utilisateur

ABB

ABB ACS850 series Guide de dépannage

ABB

ABB Zenith ZT30 Manuel utilisateur

Manuels Électricité industrielle populaires d'autres marques

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Manuel technique

Abtech

Abtech HVJB Series Mode d’emploi

Murata

Murata GRM0335C1H8R1DA01 Series Manuel utilisateur

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Manuel utilisateur

Eaton

Eaton Ulusoy HMH24-04 Manuel utilisateur

Newlong

Newlong NP-7H Manuel utilisateur

Murata

Murata GJM0335C1E4R4BB01 Series Manuel utilisateur

Stahl

Stahl 8575/12 Manuel utilisateur

SI Pegasus Manuel utilisateur

Murata

Murata GRM1555C1H2R7CA01 Seies Manuel utilisateur

Murata

Murata GRM0225C1E6R4BA03 Series Manuel utilisateur

Cooper Power Systems

Cooper Power Systems VXE15 Manuel utilisateur

S&C

S&C Vista SD Manuel utilisateur

Murata

Murata GRM0335C2A7R3CA01 Series Manuel utilisateur

Siemens

Siemens 3VA9988-0BM10 Manuel utilisateur

Siemens

Siemens SITRANS LVS100 Manuel utilisateur

Murata

Murata GRM32ER60G227ME05 Series Manuel utilisateur

Siemens

Siemens SENTRON SUPERSWITCH 3KL82 Series Manuel utilisateur