Aaeon SBC-590 Manuel utilisateur

SBC-590

Full-size PCI/ISA

Pentium CPU Card

with SVGA

This document is copyrighted 1996. All rights are reserved.

AAEON Technology Inc. reserves the right to make improvements

to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However the

original manufacturer assumes no responsibility for its use, nor for

any infringements upon the rights of third parties which may result

from its use.

Acknowledgements

VIA is a trademark of VIA Technology, Inc.

ALG is a trademark of Avance Logic, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows ®is a registered trademark of Microsoft Corp.

UMC is a trademark of United Microelectronics Corporation.

All other product names or trademarks are properties of their

respective owners.

Part No. 2006590002 3rd Edition

Printed in Taiwan September 1997

Packing list

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 SBC-590 CPU card

• 1 6-pin mini-DIN dual outlet adapter for keyboard and PS/2

mouse

• 1 Hard disk drive (IDE) interface cable (40 pin)

• 1 Floppy disk drive interface cable (34 pin)

• 1 Parallel port adapter (26 pin) and COM2 adapter (9 pin) kit

• 3 Utility disks with SVGA utility programs and drivers

• PC/104 Expansion connector converter (pin headers)

• PC/104 Module mounting supports

If any of these items are missing or damaged, contact your

distributor or sales representative immediately.

FCC STATEMENT

THISDEVICECOMPLIESWITHPART 15 FCC RULES. OPERATIONIS

SUBJECTTOTHEFOLLOWINGTWOCONDITIONS:(1)THISDEVICE

MAYNOTCAUSEHARMFULINTERFERENCE.(2)THISDEVICE MUST

ACCEPTANYINTERFERENCERECEIVEDINCLUDINGINTERFERENCE

THATMAYCAUSEUNDESIREDOPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TOCOMPLY

WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSU-

ANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE

DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINTST

HARMFUL INTERFERENCEWHEN THE EQUIPMENT IS OPERATED

IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENER-

ATES, USES, AND CAN RADIATE RADIO FREQENCY ENERGYAND ,

IFNOTINSTATLLED ANDUSED IN ACCORDANCEWITH THE

INSTRUCTION MANUAL, MAY CAUSEHARMFUL INTERFERENCE

TO RADIO COMMUNICATIONS.OPERATION OF THIS EQUIPMENT

IN A RESIDENTIALAREA IS LIKELY TO CAUSE HARMFUL

INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED

TOCORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Contents

Chapter 1: General Information ................................... 1

Introduction .............................................................................. 2

Features.................................................................................... 3

Specifications ........................................................................... 4

Board layout ............................................................................. 6

Carddimensions ....................................................................... 7

Chapter 2: Hardware Configuration ............................. 9

Jumpers and connectors..........................................................10

Locating jumpers and connectors............................................ 11

Settingjumpers ........................................................................12

Safety precautions...................................................................13

Installing the CPU ...................................................................14

Removing a CPU ....................................................................14

Installing the CPU ...................................................................14

CPU Clock Ratio Select (J1,J2)..............................................15

CPU VCC Select (J3, J4) .......................................................16

CPU/PCI Clock Slelect (J5, J6, J7) ........................................17

On-Board VGA ENABLE/DISABLE (J8)............................18

Clear CMOS (J9) ....................................................................18

PS/2 Mouse/IRQ12 Select (J10).............................................19

Internal Buzzer Control (J11) ..................................................19

Watchdog Timer Control (J12) ................................................19

Watchdog Timer Programming ...............................................19

COM1 IRQ Control (J14) .......................................................20

COM2 IRQ Control (J13) .......................................................20

Installing DRAM (SIMMs) .....................................................20

Chapter 3: Connecting Peripherals ............................ 23

IrDA Tx/Rx Header (CN1) ..................................................... 26

Power LED and Keylock (CN2) ............................................ 26

External Speaker (CN3).......................................................... 27

CPU cooling fan power connector (CN4)............................... 27

Hard Drive LED (CN5) .......................................................... 27

Reset Switch (CN6) ................................................................ 27

Enhanced IDE (CN7, CN8).................................................... 28

Floppy Drive (CN9)................................................................ 28

DisplayConnections ............................................................... 28

Parallel Port (CN14) ............................................................... 30

Power Supply connections...................................................... 30

Power supply connector (CN15, CN19)................................. 30

Serial Ports (CN18, CN12)..................................................... 31

Keyboard & PS/2 Mouse (CN20, CN17)............................... 32

Chapter 4: Award BIOS Setup .................................. 35

Enteringsetup ......................................................................... 36

Standard CMOS setup ............................................................ 37

BIOS features setup................................................................ 38

CHIPSET features setup ........................................................ 42

Power management setup ....................................................... 43

PCI configuration setup .......................................................... 44

Load BIOS defaults ................................................................ 45

Load setup defaults................................................................. 45

Passwordsetting ..................................................................... 45

IDE HDD auto detection ........................................................ 45

Save & Exit setup ................................................................... 45

Exitwithoutsaving.................................................................. 45

Chapter 5: SVGA Setup ............................................ 47

Windows3.1x Driver Installation ........................................... 48

Windows95Installation ......................................................... 49

InstallationProcedure ............................................................ 49

Windows NT 3.51 ................................................................. 50

InstallationProcedure ............................................................ 50

OS/2 Warp ............................................................................. 51

InstallationProcedure ............................................................ 51

Appendix A: Programming the Watchdog Timer .. 55

Appendix B: Installing PC/104 Modules ................... 57

Chapter 1 General Information 1

General

Information

This chapter gives background informa-

tion on the SBC-590.

Sections include:

• Card specifications

• Board layout

CHAPTER

2SBC-590 User'sManual

Introduction

The SBC-590 is an all-in-one single board Pentium computer with an

on-board SVGA controller, with PCI-bus and ISA-bus support. It

packs all the functions of an industrial computer with display capabili-

ties on a single full-size card. The SBC-590 is fully PC/AT compati-

ble, so your software will run without modifications.

The on-board PCI-bus SVGA controller uses the ALG 2032 chipset

with 1 MB shared memory. This chipset, used with the local PCI-bus,

enables 32-bit graphic throughput and has a built-in Standard

Feature Connector. These features make the SBC-590 particularly

suited for graphics intensive applications.

Another feature of the SBC-590 is the inclusion of a high speed local

bus IDE controller. This controller supports (through ATA PIO)

mode 3 and mode 4 hard disks, which enables data transfer rates in

excess of 11 MB/sec. Up to four IDE devices can be connected,

including large hard disks, CD-ROM drives, tape backup drives or

other IDE devices. The built-in enhanced IDE controller provides a

4-layer 32-bit posted write-buffer and a 4-layer 32-bit read-prefetch-

buffer to accomplish the IDE boost in performace improvements.

On-board features also include two high-speed RS-232 serial ports

with 16C550 UARTs, one bidirectional SPP/EPP/ECP parallel port

and a floppy drive controller. In addition to the Pentium's 16 KB of

on-chip cache memory, the SBC-590 comes with an extra 256 KB or

512 KB of second level memory on-board.

If program execution is halted by a program bug or EMI, the board's

16-stage watchdog timer can automatically reset the CPU or generate

an interrupt, provided the watchdog timer has been programmed in

advance. This ensures reliability in unmanned or stand-alone systems.

The SBC-590 supports 5V EDO DRAM. It also provides four 72-pin

SIMM (Single In-line Memory Module) sockets for its on-board

system DRAM. These sockets give you the flexibility to configure

your system from 1 MB to 128 MB of DRAM using the most eco-

nomical combination of SIMMs.

Chapter 1 General Information 3

Features

•Accepts Intel Pentium 75-200 MHz CPUs and other compatible CPUs at

66/60/50/40 MHz (external clock speed)

•Fully PC/AT-compatible PCI/ISA-bus CPU card

•On-board 32-bit PCI-bus SVGA controller

•Built-in, fast PCI enhanced IDE controller; supports four IDE devices

(large hard disks, CD-ROM, tape backup, etc.)

•Supports 5 V EDO DRAM and up to 128 MB of on-board DRAM

• Supports pipeline burst SRAM module

•Two high-speed serial RS-232 ports (16C550 UARTs with 16-byte FIFO);

IRQ3, 4, or IRQ 10, 11 can be individually selected

•One enhanced bidirectional parallel port; supports SPP/EPP/ECP

•Watchdog timer (64 steps, 1 seconds per step)

•On-board keyboard and PS/2 mouse connector

•Connectors for PC/104 module expansion

•"Green" function; supports power management

•Supports a Feature Connector

Table des matières

Autres manuels Aaeon Carte mère

Aaeon

Aaeon ATX-Q670A Manuel utilisateur

Aaeon

Aaeon PCM-6894 Manuel utilisateur

Aaeon

Aaeon PCM-4897 Manuel utilisateur

Aaeon

Aaeon ITP11 Manuel utilisateur

Aaeon

Aaeon ATX-Q370A Manuel utilisateur

Aaeon

Aaeon MB-662 Manuel utilisateur

Aaeon

Aaeon EMB-QM87A Manuel utilisateur

Aaeon

Aaeon PCM-5894 Manuel utilisateur

Aaeon

Aaeon GENE-9655 Manuel utilisateur

Aaeon

Aaeon IMBI-Q57 Manuel utilisateur

Aaeon

Aaeon UPC-Plus Manuel utilisateur

Aaeon

Aaeon SBC-656 Manuel utilisateur

Aaeon

Aaeon SBC-780 Manuel utilisateur

Aaeon

Aaeon IMBA-H61A Manuel utilisateur

Aaeon

Aaeon EMB-CV1 series Manuel utilisateur

Aaeon

Aaeon PCM-6894 Manuel utilisateur

Aaeon

Aaeon EMB-852T Manuel utilisateur

Aaeon

Aaeon SBC-659P Manuel utilisateur

Aaeon

Aaeon FSB-868G Manuel utilisateur

Aaeon

Aaeon PCM-LN05 Rev.B Manuel utilisateur

Aaeon

Aaeon PCM-8120 Manuel utilisateur

Aaeon

Aaeon SBC-558 Manuel utilisateur

Aaeon

Aaeon GENE-U15B Manuel utilisateur

Aaeon

Aaeon SBC-558P Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur