3One data IES2008-8T-P48 Manuel utilisateur

IES2008-8T-P48

Unmanaged Industrial Ethernet

Switch Quick Installation Guide

3onedata Co., Ltd.

Address:

3/B, Zone 1, Baiwangxin High Technology

Industrial Park, Xili, Nanshan District,

Shenzhen

Website:

www.3onedata.com

Tel:

+86 0755-26702688

Fax:

+86 0755-26703485

【Package checklist】

Please check whether the package and accessories are intact

while using the switch for the first time.

Industrial Ethernet switch

Certification

Quick installation guide

Warranty card

DIN-Rail mounting attachment

If any of these items are damaged or lost, please contact our

company or dealers, we will solve it ASAP.

【Product Overview】

This product is full 100M unmanaged DIN-Rail industrial

Ethernet switch. The model is IES2008-8T-P48 (8 100M

copper ports + 1 12~48VDC power supply)

【Panel design】

Rear view, bottom view and top view

Front view and side view

1. DIN-Rail mounting kit

2. Power supply input terminal block

3. DIP switch

4. Grounding screw

5. Power supply input status indicator PWR

6. Copper port connection indicator

7. 100M Ethernet copper port

【Mounting Dimension】

Unit: mm

Attention before mounting:

Don't place or install the device in area near water or

moist, keep the relative humidity of the device

surrounding between 5%~95% without condensation.

Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the

device.

The device surface temperature is high after running;

please don't directly contact to avoid scalding.

【DIN-Rail Mounting】

For convenient usage in industrial environments, the product

adopts 35mm DIN-Rail mounting, mounting steps as below:

Step 1 Check whether the DIN-Rail mounting kit that

comes with the device is installed firmly.

Step 2 Insert the bottom of DIN-Rail mounting kit (one side

with spring support) into DIN-Rail, and then insert

the top into DIN-Rail.

Tips:

Insert a little to the bottom, lift upward and then insert

to the top.

Step 3 Check and confirm the product is firmly installed on

DIN-Rail, and then mounting ends.

【Disassembling DIN-Rail】

Step 1 Power off the device.

Step 2 After lift the device upward slightly, first shift out the

top of DIN-Rail mounting kit, and then shift out the

bottom of DIN-Rail, disassembling ends.

Attention before powering on:

Power ON operation: first connect power line to the

connection terminal of device power supply, and then

power on.

Power OFF operation: first unpin the power plug, and

then remove the power line, please note the operation

order above.

【Power Supply Connection】

DC power supply

This series provide 3-pin 5.08 pitch power

input terminal blocks. Power supply range:

12~48VDC

【DIP Switch Settings】

It provides 4-pin DIP switch for function settings,

among which “ON” is enable valid end.

The definitions of DIP switch are as follows:

DIP

Definition

Operation

Loop detection

Set the DIP switch to ON to

enable the loop detection

function.

Storm suppression

Set the DIP switch to ON to

enable the storm

suppression function.

One-key VLAN

Set the DIP switch to ON to

enable VLAN function, port

1 can communicate with

DIP

Definition

Operation

other ports, while other ports

are isolated from each

other.

Flow control

Set the switch to ON to

enable the flow control

function

【Checking LED Indicator】

The function of each LED is described in the table as below:

LED

Status

Description

PWR

Power supply is connected and

running normally

OFF

Power supply is disconnected

and running abnormally.

Link/ACT

(1-8)

Ethernet port connection is

active.

Blinking

Data transmitted

OFF

Ethernet port connection is

inactive.

【Specification】

Panel

100M copper port

10/100Base-T(X) self-adapting

RJ45 port, full/half duplex

self-adaption, support

MDI/MDI-X self-adaption

Indicator

Power indicator, interface

indicator

Exchange attributes

Backplane bandwidth

1.6G

MAC table size

Power supply

Input power supply

12~48VDC

Access terminal

3 pins 5.08mm pitch terminal

blocks

Support anti-reverse connection

and over-current protection

Consumption

No-load

0.5W@24VDC

Full-load

1.4W@24VDC

Environmental Limits

Working temperature

-40~75℃

Storage temperature

-40~85℃

Working humidity

5%~95% (no condensation)

Protection grade

IP40 (metal shell)

Autres manuels 3One data Changer

3One data

3One data TNS5800 Series Manuel utilisateur

3One data

3One data IES2005 Manuel utilisateur

3One data

3One data SW4485I Manuel utilisateur

3One data

3One data SW4485 Manuel utilisateur

3One data

3One data IPS316-2GC-4POE Manuel utilisateur

3One data

3One data ICS5428 Series Manuel utilisateur

3One data

3One data TNS5500D Series Manuel utilisateur

3One data

3One data ES1026-2F Manuel utilisateur

3One data

3One data ES2010G-2GS Manuel utilisateur

3One data

3One data TNS5500D Series Manuel utilisateur

3One data

3One data TNS5800 Series Manuel utilisateur

3One data

3One data TNS5500D Series Manuel utilisateur

3One data

3One data ES209G-1GF Manuel utilisateur

3One data

3One data IES3016L Series Manuel utilisateur

3One data

3One data IES2010 Series Manuel utilisateur

3One data

3One data ICS5428 Series Manuel utilisateur

3One data

3One data IES7116G-8GS Series Manuel utilisateur

3One data

3One data IES618 Series Manuel utilisateur

3One data

3One data IPS716-2GC-4POE Manuel utilisateur

3One data

3One data TNS5500 Series Manuel utilisateur

3One data

3One data IES5028G-4GS-8GC Manuel utilisateur

3One data

3One data IES5028G Series Manuel utilisateur

3One data

3One data IES2100SL Series Manuel utilisateur

3One data

3One data IES2312-8GT2GS2HS-2P48 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur