3One data ES209G-1GF Manuel utilisateur

ES209G-1GF

Unmanaged Ethernet Switch Quick

Installation Guide

3onedata Co., Ltd.

Address:

3/B, Zone 1, Baiwangxin High Technology

Industrial Park, Xili, Nanshan District,

Shenzhen

Website:

www.3onedata.com

Tel:

+86 0755-26702688

Fax:

+86 0755-26703485

【

Package Checklist

】

Please check whether the package and accessories are intact

while using the switch for the first time.

Industrial Ethernet switch

Certification

Quick installation guide

Warranty card

5. DIN-Rail mounting attachment 6. Terminal

blocks

If any of these items are damaged or lost, please contact our

company or dealers, we will solve it ASAP.

【

Product Overview

】

The product is full Gigabit unmanaged DIN-Rail Ethernet

switch. Module as follows: ES209G-1GF (8 Gigabit copper

ports + 1 Gigabit fiber ports).

【

Panel Design

】

Rear view, Top view and Bottom view

Front view

1. DIN-Rail mounting kit

2. DIP switch

3. Power input terminal block

4. Grounding screw

5. 1000Base-FX Gigabit Ethernet fiber port

6. Power supply input status indicator

7. 10/100/1000Base-T(X) Ethernet port

8. Interface indicator

【

Mounting Dimension

】

Unit: mm

Attention before mounting:

Don't place or install the device in area near water or

moist, keep the relative humidity of the device

surrounding between 5%~95% without condensation.

Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the

device.

The device surface temperature is high after running;

please don't directly contact to avoid scalding.

【

DIN-Rail Mounting

】

For convenient usage in industrial environments, the product

adopts 35mm DIN-Rail mounting, mounting steps as below:

Check if the DIN-Rail mounting kit is installed firmly.Step 1 Insert the bottom of DIN-Rail mounting kit (one sideStep 2 with spring support) into DIN-Rail, and then insert

the top into DIN-Rail.

Tips:

Insert a little to the bottom, lift upward and then insert

to the top.

Check and confirm the product is firmly installed onStep 3 DIN-Rail, then mounting ends.

【Disassembling DIN-Rail】

Device power off.Step 1 After lift the device upward slightly, first shift out theStep 2 top of DIN-Rail mounting kit, then shift out the

bottom of DIN-Rail, disassembling ends.

Attention before power on:

Power ON operation: first connect power line to the

connection terminal of device power supply, then power

on.

Power OFF operation: first unpin the power plug, then

remove the power line, please note the operation order

above.

【Power Supply Connection】

DC power supply

The device provides 4 pins 7.62mm pitch

power supply input terminal blocks and

two independent DC power supply

systems for PWR1 and PWR2. The power

supply supports anti-reverse connection.

Power supply range: 12～48VDC

【DIP Switch Settings】

The device provides 4 pins DIP switches for

function settings, where "ON" is enable valid

terminal. Please power off and power on after

changing the status of DIP switches. DIP

switches definition as follows:

DIP

Definition

Operation

Flow control

Set the DIP switch to ON

2 Reserved -

Port isolation

Set the DIP switch to ON, fiber

DIP

Definition

Operation

port

can communicate with

copper port. Copper ports can’t

communicate with each other.

Reserved

【Checking LED Indicator】

The function of each LED is described in the table as below:

LED

Status

Description

P1/P2

P1/P2 is running normally

OFF P1/P2 is disconnected and running

abnormally.

Link/Act

(G1-G9)

Ethernet port connection is active.

Blinking

Data transmitted

OFF

Ethernet port connection is inactive.

【Specification】

Panel

Gigabit copper port

10/100/1000Base-T(X), RJ45,

automatic flow control, full/half

duplex mode, MDI/MDI-X

autotunning

Gigabit fiber port 1000Base-FX, optional

SC/ST/FC

Indicator Power indicator, interface

indicator

Exchange attributes

Backplane bandwidth

20G

Packet buffer size

1Mbit

MAC table size

Power supply

Input power supply

24VDC (12~48VDC)

Support dual power supplies

redundancy,

reverse-connection protection

Access terminal 4 pins 7.62mm pitch terminal

blocks

Consumption

No-load

3.9W@24VDC

Full-load

8.1W@24VDC

Working environment

Working temperature

0~55

℃

Storage temperature

-10~65

℃

Working humidity

5%~95% (no condensation)

Protection grade

IP30 (metal shell)

Autres manuels 3One data Changer

3One data

3One data ES1024 Manuel utilisateur

3One data

3One data IPS3110 Series Manuel utilisateur

3One data

3One data IES2312-8GT2GS2HS-2P48 Manuel utilisateur

3One data

3One data IES7112G-4GS Manuel utilisateur

3One data

3One data IES318 Series Manuel utilisateur

3One data

3One data IES6300 Series Manuel utilisateur

3One data

3One data IES716-2GS Manuel utilisateur

3One data

3One data IES7116G-8GS Series Manuel utilisateur

3One data

3One data IES3016 Series Manuel utilisateur

3One data

3One data ICS5556 Series Manuel utilisateur

3One data

3One data IES2305 Series Manuel utilisateur

3One data

3One data IES6300-8GHP2GS2HS-2P48-360W Manuel utilisateur

3One data

3One data ES1026-2F Manuel utilisateur

3One data

3One data IES5028G-4GS-8GC Manuel utilisateur

3One data

3One data IES2008-8T-P48 Manuel utilisateur

3One data

3One data ES5018 Manuel utilisateur

3One data

3One data ICS6420 Series Manuel utilisateur

3One data

3One data TNS5500D Series Manuel utilisateur

3One data

3One data IES5028G-4GS-8GC Manuel utilisateur

3One data

3One data ES2010G-2GS Manuel utilisateur

3One data

3One data ICS6400-12GT12GS4XS Manuel utilisateur

3One data

3One data IES206 Series Manuel utilisateur

3One data

3One data IES5024 Series Manuel utilisateur

3One data

3One data IES2220 Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur