3One data IES7110-2GS-P Manuel utilisateur

IES7110-2GS Series

Managed Industrial Ethernet Switch

User manual

Shenzhen 3onedata Technology Co., Ltd

Tel: +86-755-26702668 Fax: +86-755-26703485

www.3onedata.com

【Summarize】

IES7110-2GS series is an industrial grade, managed and

redundancy Ethernet switch. It included IES7110-2GS-P

(12/48VDC), IES7110-2GS-P (110/220VAC), IES7110-2GS-2F-P

(12/48VDC) and IES7110-2GS-4F-P (12/48VDC). IES7110-2GS

series provided some kinds of advanced network managed

function, like as: SW-Ring redundancy ring network, VLAN,

Trunking, Quality of Service, Speed control, port mirroring, fault

alarm and firmware upgrade online. SW-Ring can bring your

Ethernet to intelligent redundancy. Standard Industry design can

satisfied every requirement of the industry scene. All components

used industry grade, it takes products high Reliability. It provided

wide voltage power supply input.

SW-RingTM is designed as rapid redundancy network

arithmetic. It provided recover technology for fault of rapid

redundant network, the recovery time<20ms.

【Packing list】

Please check the packaging and accessories by your first

using.

Industrial Ethernet switch(IES7110 series) ⅹ 1

User manual ⅹ 1

CD ⅹ 1

Certificate of quality ⅹ 1

Warranty card ⅹ 1

Please inform us or our distributor if your equipments have

been damaged or lost any accessories, we will try our best to

satisfy you.

【Feature】

High performance network exchange technology

Support IEEE802.3, IEEE802.3u, IEEE 802.3x,

IEEE802.3z, IEEE802.1Q, IEEE802.1p, IEEE802.1D/W

SW-Ring ring network patent technology (Fault recovery

time<20ms）

Support RSTP, way exchange time<50ms

Support WEB configuration

Support MAC address learning, aging automatic

Support port status display, data update.

Support static and dynamic IGMP

Support flow statistics

Support bi-directional port mirroring

Support rate control, Broadcast storm control

Support configuration files up and download

Support 1 channel relay alarm output

Reliable Industrial grade design

Industrial grade 4 design, -40-75℃work temperature

No fan deign

IP40 protection grade

【Panel layout】

Top view

Below view Rear view

www.texim-europe.com

IES7110-2GS-P (12/48VDC)

1. Ground screw

2. PWR1/PWR2 power input

3. Relay output terminal block

4. DIP switch

5. CONSOLE port

6. DIN-Rail mounts

7. Wall mount screw hole

8. Relay alarm LED

9. The power LED

10. Systems running LED

11. 100M Link/ACT LED

12. 1000M Link/ACT LED

13. 1000Base-FX SFP port

14. 10Base-T /100Base-TX port

IES7110-2GS-P（110/220VAC）

1. Ground screw

2. Power input (L/-, FG, N/+)

3. Relay output terminal block

4. DIP switch

5. CONSOLE port

6. DIN-Rail mounts

7. Wall mount screw hole

8. Relay alarm LED

9. Systems running LED

10. 100M Link/ACT LED

11. 1000M Link/ACT LED

12. 1000Base-FX SFP port

13. 10Base-T /100Base-TX port

Note: AC power supply input did not have power supply

indicator

IES7110-2GS-2F-P (12/48VDC)

1. Ground screw

2. PWR1/PWR2 power input

3. Relay output terminal block

4. DIP switch

5. CONSOLE port

6. DIN-Rail mounts

7. Wall mount screw hole

8. Relay alarm LED

9. The power LED

10. Systems running LED

11. 100M Link/ACT LED

12. 1000M Link/ACT LED

13. 1000Base-FX SFP port

14. 10Base-T /100Base-TX port

15. 100Base-FX port

IES7110-2GS-4F-P (12/48VDC)

1. Ground screw

2. PWR1/PWR2 power input

3. Relay output terminal block

4. DIP switch

5. CONSOLE port

6. DIN-Rail mounts

7. Wall mount screw hole

8. Relay alarm LED

9. The power LED

10. Systems running LED

11. 100M Link/ACT LED

12. 1000M Link/ACT LED

13. 1000Base-FX SFP port

14. 10Base-T /100Base-TX port

15. 100Base-FX port

【Appearance and dimension】

Unit（mm）

【Power supply input】

DC AC

Top view Front view

IES7110-2GS series top panel provided 4 bit power supply

input terminal block, support AC or DC input. DC power supply

input supported redundancy function, provided PWR1 and PWR2

power input, can use for single, and can connect 2 separately

power supply system, use 1 pair terminal block connect the device

at the same time. If one of the power system broke, the device can

work un-interruptible. Built-in overcorrect protection, Reverse

connection protection. Voltage input range is 12 ～48VDC

（terminal block defined as: V1-、V1+、V2-、V2+）.

AC voltage input range: 110~220VAC （47 ～63Hz ）, the

defined of terminal block: N/-, FG, L/+.

www.texim-europe.com

Important notice:

1. Power ON operation: first of all, insert power cable’s terminal

block into device’s power port, then insert power supply plug into

power source

2. Power OFF operation: First off all, unpin power plug, then

strike the terminal block, please take care of operation sequence.

【DIP switch】

Top panel provided 4 bits DIP switch to do function

configure （OFF is default factory ）, 1 and 4 keep for future

function. 2 is recovery default factory. 3 is for upgrade. Please

power off and power on when you change the status of DIP

switch.

【Console port】

IES7110-2GS series provided 1pcs procedure test port based

in serial port. It adopts RJ45 interface, located in top panel, can

configure the CLI command through RJ45 to DB9 female cable.

【Relay connection】

The relay owns two contacts of the terminal block on the

top pane of IES7010-2GS series. It is used to detect both power

failure and port failure. The two wires attached to contacts form

an open circuit when:

(1) IES7010-2GS series has lost power supply from one of

the DC power inputs.

(2) One of the ports is failure.

【Communication connector】

10/100BaseT(X) Ethernet port

The pinout of RJ45 port display as below, connect by UTP or

STP. The connect distance is no more than 100m. 100Mbps is

used 120Ωof UTP 5 , 10Mbps is used 120Ωof UTP 3,4,5.

RJ 45 port support automatic MDI/MDI-X operation. Can

connect the PC, Server, Converter and HUB .Pin 1,2,3,6

Corresponding connection in MDI. 1→3, 2→6, 3→1, 6→2 are

used as cross wiring in the MDI-X port of Converter and HUB.

10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin

in the table as below.

NO.

MDI signal

MDI-X signal

TX+

RX+

TX-

RX-

RX+

TX+

RX-

TX-

4, 5, 7, 8

—

Note：“TX±”Transmit Data±，“RX±”Receive Data±，“—”Not Use。

MDI (straight-through cable)

MDI-X (Cross over cable)

MDI/MDI-X auto connection makes IES7110-2GS easy to

use for customers without considering the type of network cable.

100Base-FX Fiber port

100Base-FX full-duplex SM or MM port, SC/ST/FC type .The

fiber port must be used in pair, TX (transmit) port connect remote

switch’s RX (receive) port; RX (receive) port connect remote

switch’s TX (transmit) port.

The optical fiber connection supports the line to instruct

enhance the reliability of network effectively.

Suppose: If you make your own cable, we suggest labeling the

two sides of the same line with the same letter (A-to-A and

B-to-B, shown as below, or A1-to-A2 and B1-to-B2).

1000SFP fiber port(mini-GBIC)

1000BaseSFP fiber port adopts gigabit mini-GBIC

transmission, can choice different SFP module according to

different transfer distance. Fiber interface must use for pair, TX

1 8

www.texim-europe.com

port is transmit side, must connect to RX (receive side). The fiber

interface support loss line indicator.

Suppose: If you make your own cable, we suggest labeling the

two sides of the same line with the same letter (A-to-A and

B-to-B, shown as below, or A1-to-A2 and B1-to-B2).

【LED Indicator】

IES7110-2GS LED indictor light on the front panel .the

function of each LED is described in the table as below:

(AC power supply input did not have power supply indicator)

System status LED

LED

Indicator

Description

P1 connection regularly

OFF

P1 Power supply have no

connection or unwonted

P2 connection regularly

OFF

P2 Power supply have no

connection or unwonted

Alarm

Power, port have alarm

OFF

Power, port have no alarm

Run

ON/OFF

Device unwonted

Blinking

Device working steadily

Link/ACT

（1~8/G1~G2）

Established effective network

connection

Blinking

Network in activity statues

OFF

Did not established effective

network connection

【Installation】

Before installation, confirm that the work environment meet the

installation require, including the power needs and abundant

space. Whether it is close to the connection equipment and other

equipments are prepared or not.

1. Avoid in the sunshine, keep away from the heat fountainhead or

the area where in intense EMI.

2. Examine the cables and plugs that installation requirements.

3. Examine whether the cables be seemly or not (less than 100m)

according to reasonable scheme.

4. Screw, nut, tool provide by yourself.

5. Power: DC series support redundant 12-48VDC power input

AC series support 100-240VAC power input

6. Environment：working temperature -40～75℃

Relative humidity 5%～95%

DIN-rail installation

In order to apply for industrial environments conveniently,

IES7110-2GS series adopts 35mm DIN-Rail installation, the

installation steps are as follows:

1. Examine the DIN-Rail accessories

2. Examine DIN Rail is firm or not and the position is suitable or

not.

3. Insert the top of the DIN-Rail into the slot just below the stiff

metal spring.

4. The DIN-Rail attachment unit will snap into place as shown

below.

Wiring Requirements

Cable laying need to meet the following requirements,

1. It is needed to check whether the type, quantity and

specification of cable match the requirement before cable

laying;

2. It is needed to check the cable is damaged or not, factory

records and quality assurance booklet before cable laying;

3. The required cable specification, quantity, direction and laying

position need to match construction requirements, and cable

length depends on actual position;

4. All the cable cannot have break-down and terminal in the

middle;

5. Cables should be straight in the hallways and turning;

6. Cable should be straight in the groove, and cannot beyond the

groove in case of holding back the inlet and outlet holes. Cables

should be banded and fixed when they are out of the groove;

7. User cable should be separated from the power lines. Cables,

power lines and grounding lines cannot be overlapped and

mixed when they are in the same groove road. When cable is

too long, it cannot hold down other cable, but structure in the

middle of alignment rack;

8. Pigtail cannot be tied and swerved as less as possible. Swerving

radius cannot be too small (small swerving causes terrible loss

of link). Its banding should be moderate, not too tight, and

should be separated from other cables;

9. It should have corresponding simple signal at both sides of the

cable for maintaining.

www.texim-europe.com

【Specification】

Technology

Standard: Support IEEE802.3, IEEE802.3u, IEEE 802.3x,

IEEE802.3z, IEEE802.1Q, IEEE802.1p, IEEE802.1D,

IEEE802.1W

Protocol: ARP, ICMP, TCP, DHCP, DNS, HTTP, Telnet,, SW-Ring,

RSTP, SNMP

Flow control: IEEE802.3x flow control, back press flow control

Function

Switch function: SW-Ring, QOS, 802.1QVLAN, RSTP, SNMP,

Port trunking, static multicast filter, port mirroring,

bandwidth management, broadcast storm control, port flow

statistics , upgrade online, up and download configuration

file, user name access system

SW-Ring: Support Single, Couple, Chain, Dual homing

Exchange attribute

100M forward speed: 148810pps

1000M forward speed: 1488100pps

Transmit mode: store and forward

System exchange bandwidth: 5.6G

MAC address table: 8K

Memory: 1M

Interface

Electric port: 10Base-T/100Base-TX auto speed control, Half/full

duplex and MDI/MDI-X auto detect

100M optic fiber port: 100Base-FX, SC/ST connector, support

single mode （20/40/60/80Km optional ）, multi

mode(2Km), wavelength: 1310nm, 1550nm

1000M fiber port: 1000Base-FX（SFP port）

Console port: debug serial port carry out CLI command

Alarm port: 2bit 7.62mmTerminal block

1 channel relay alarm output

Load ability: 1A@24VDC

Transfer distance

Twisted cable: 100M（standard CAT5/CAT5e cable）

Multimode: 1310nm, 2Km

Single mode: 1310nm, 20/40/60Km

1550nm, 60/80/100/120Km

LED indicator

Run indicator: Run

Interface indicator: Link (1~8/G1~G2)

DC Power supply indicator: P1, P2

Alarm indicator: Alarm

Power supply

Input voltage: 12～48VDC or 110～220VAC（47～63Hz）

Input method: 4 bits 7.62mm terminal block

Overload current protect: 4.0A (DC) or 5.0A (AC)

Support DC dual power supply redundancy and alarm input

Support DC input no parity, protection reverse connection

Consumption

IES7110-2GS-P (12/48VDC):

Unload consumption: 2.2W@24VDC

Full load consumption: 5.5W@24VDC

IES7110-2GS-P (110/220VAC):

Unload consumption: 2.7W@220VAC

Full load consumption: 5.5W@220VAC

IES7110-2GS-2F–P (12/48VDC):

Unload consumption: 5.1W@24VDC

Full load consumption: 8.0W@24VDC

IES7110-2GS-4F–P (12/48VDC):

Unload consumption: 6.1W@24VDC

Full load consumption: 9.0W@24VDC

Working environment

Working temperature: -40～75℃

Storage temperature:-40～85℃

Relative Humidity: 5%~95% (no condensation)

Mechanical Structure

Shell: IP40 protection grade, metal shell

Installation: DIN rail

Size（W×H×D）:138mm×53mm×110mm

Weight: 720g

Industry Standard

CE, FCC, RoHS, PAL, UL508 (Pending)

EMI: FCC Part 15, CISPR (EN55022) class A

EMS: EN61000-4-2 (ESD) , Level 4

EN61000-4-3 (RS) , Level 3

EN61000-4-4 (EFT) , Level 4

EN61000-4-5 (Surge) , Level 4（AC power supply）

EN61000-4-6 (CS) , Level 3

EN61000-4-8, Level 5

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Shake: IEC 60068-2-6

Warranty: 5 years

www.texim-europe.com

Contact details

2015 version 2.0

The Netherlands

Germany North

Nordic region

Belgium

Germany South

UK & Ireland

Austria

Elektrostraat 17

NL-7483 PG Haaksbergen

T: +31 (0)53 573 33 33

F: +31 (0)53 573 33 30

E: [email protected]

Bahnhofstrasse 92

D-25451 Quickborn

T: +49 (0)4106 627 07-0

F: +49 (0)4106 627 07-20

E: [email protected]

Sdr. Jagtvej 12

DK-2970 Hørsholm

T: +45 88 20 26 30

F: +45 88 20 26 39

E: [email protected]

Zuiderlaan 14 bus 10

B-1731 Zellik

T: +32 (0)2 462 01 00

F: +32 (0)2 462 01 25

E: [email protected]

Martin-Kollar-Strasse 9

D-81829 München

T: +49 (0)89 436 086-0

F: +49 (0)89 436 086-19

E: [email protected]

St. Mary’s House, Church Lane

Carlton Le Moorland

Lincoln LN5 9HS

T: +44 (0)1522 789 555

F: +44 (0)845 299 22 26

E: [email protected]

Warwitzstrasse 9

A-5020 Salzburg

T: +43 (0)662 216 026

F: +43 (0)662 216 026-66

E: [email protected]

General information

[email protected]

www.texim-europe.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels 3One data Routeur réseau

3One data

3One data IEM615 Series Instructions d'utilisation

3One data

3One data IES6116 Series Manuel utilisateur

3One data

3One data IES308 Manuel

3One data

3One data IES2010-2GS Series Manuel utilisateur

3One data

3One data MES600 Series Manuel utilisateur

3One data

3One data ICPE2300A-BW-8A25-1GC3GT-PD2P12 48 Manuel utilisateur

3One data

3One data IES5028G-8GC-4GS Manuel utilisateur

3One data

3One data IES3020-4GS-4F-P Manuel utilisateur

3One data

3One data IES615-2D Series Manuel utilisateur

3One data

3One data IES615-2D Series Manuel utilisateur

3One data

3One data IES205G Manuel utilisateur

3One data

3One data IES2010-2GS-4F Manuel

3One data

3One data ICS5028G Series Manuel utilisateur

3One data

3One data IES618-4D Series Manuel utilisateur

3One data

3One data IES308-1F-P Manuel utilisateur

3One data

3One data PS1005G-1GT-4PoE Manuel utilisateur

3One data

3One data IES7120G-4GS Manuel utilisateur

3One data

3One data IRT5300-AW-5T2D Manuel utilisateur

3One data

3One data IES6116 Series Manuel utilisateur

3One data

3One data IES7110-3G Series Manuel utilisateur

3One data

3One data IES618-P Manuel utilisateur

3One data

3One data IES206G-2GS Manuel utilisateur

3One data

3One data IES7110 Series Manuel utilisateur

3One data

3One data IES215-1F-P Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité