3Com DUAL SPEED HUB/PS HUB CASCADE CONVERTER Manuel utilisateur

SUPERSTACK

®II DUAL SPEED HUB –

PS HUB CASCADE CONVERTER KIT

3C16692

USER GUIDE

The SuperStack

®II Dual Speed Hub – PS Hub Cascade Converter Kit is used for

connecting the SuperStack II Dual Speed Hub 500 to a SuperStack II PS Hub.

PS Hubs have four separate 10Mbps segments (segments 1–4) which are extended

through a stack of PS Hubs by the PS Hub’s cascade cables, as shown below.

The Cascade Converter Kit allows you to connect segment 1 of the PS Hub stack

directly to the Dual Speed Hub 500 stack’s 10Mbps segment (and the 100Mbps

segment, through the internal switch). This allows the workstations that are

connected to that PS Hub segment to communicate with the 10Mbps and 100Mbps

workstations and equipment that are connected to the Dual Speed Hub 500 stack.

The maximum number of PS Hub units and Dual Speed Hub 500 units that you can

connect using the Cascade Converter is eight. You can have a maximum of

6m (19.6ft) of cascade cabling (including the cable that connects the PS Hub stack

and Dual Speed Hub 500 stack) between the top and bottom units.

The Cascade Converter Kit is made up of a Cascade Cable and a Cascade Converter.

Connect the Cascade Cable to the ‘Dual Speed Hub Cable’ end of the Cascade

Converter (indicated on top of the Cascade Converter), as shown below.

Dimensions

16692ug.fm Page 1 Tuesday, January 6, 1998 5:35 PM

Using the Cascade Converter Kit

The Cascade Converter Kit links the bottom unit in your PS Hub stack to the top

unit in your Dual Speed Hub 500 stack, so the PS Hub stack should be above the

Dual Speed Hub 500 stack.

For safety information, refer to the information in the user guides that accompany

the Dual Speed Hub 500 and the PS Hub.

1Connecting to the PS Hub

To connect to the PS Hub, connect the Cascade Converter to the DOWN port of the

bottom unit in the PS Hub stack, as shown below.

2Connecting to the Dual Speed Hub 500

To connect to the Dual Speed Hub 500, connect the Cascade Cable (that is

connected to the Cascade Converter) directly to the UP port of the top unit in the

Dual Speed Hub 500 stack, as shown below.

If you are using Hot Swap Cascade Units with your Dual Speed Hub 500 stack or

PS Hub stack, you can connect the Cascade Converter Kit directly to these Hot Swap

Cascade Units.

UP

DOWN

Part No. DUA1669-2AAA01 / Published October 1997

© 3Com Technologies, 1997. All rights reserved. No part of this documentation may be reproduced in any form or by

any means or used to make any derivative work (such as translation, transformation, or adaptation) without permission

from 3Com Technologies. 3Com and SuperStack are registered trademarks of 3Com Corporation. Unless otherwise

indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other

countries.

16692ug.fm Page 2 Tuesday, January 6, 1998 5:35 PM

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels 3Com Matériel réseau

3Com

3Com X5 Manuel utilisateur

3Com

3Com 3C16630A Manuel utilisateur

3Com

3Com 3CRWEASYG73 - 11g Wireless LAN Outdoor Manuel utilisateur

3Com

3Com 3C421600A Manuel de programmation

3Com

3Com Switch 4210 9-Port Manuel utilisateur

3Com

3Com OfficeConnect WX4400 Manuel utilisateur

3Com

3Com 3CNJPSE24 Manuel utilisateur

3Com

3Com SuperStack II 3C16971 Manuel utilisateur

3Com

3Com SWITCH 4050 Manuel utilisateur

3Com

3Com OfficeConnect WX2200 Manuel utilisateur

3Com

3Com ETHERLINK III Manuel utilisateur

3Com

3Com Dual DSX-1 Manuel utilisateur

3Com

3Com WL-311 Manuel utilisateur

3Com

3Com NETBuilder II Manuel utilisateur

3Com

3Com IntelliJack NJ200 Manuel utilisateur

3Com

3Com 3C16080 Manuel utilisateur

3Com

3Com AirProtect Enterprise Engine 6100 Manuel utilisateur

3Com

3Com 3C16080 Manuel d'utilisation

3Com

3Com AccessBuilder 4000 Manuel utilisateur

3Com

3Com H3C S3100 16C SI Manuel utilisateur

3Com

3Com SuperStack 3 4900 Manuel utilisateur

3Com

3Com SuperStack 3870 Manuel utilisateur

3Com

3Com WL-560 Manuel utilisateur

3Com

3Com WL-308 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur