ZyXEL Communications P-2802HW(L)-IX Manuel utilisateur

P-2802HW(L)-Ix Series

802.11g Wireless VDSL VoIP IAD

Quick Start Guide

Version 3.70

6/2007

Edition 1

DEFAULT LOGIN

IP Address http://192.168.1.1

Password 1234

P-2802HW(L)-Ix Series Quick Start Guide

Overview

The P-2802HW(L)-Ix is a router which combines high-speed VDSL Internet access, a built-

in switch, a firewall and high-speed wireless networking capability. You can set the first

Ethernet port as a WAN port. See the WAN chapter in the User’s Guide for more

information.

It has phone ports for making calls over the Internet (Voice over IP or VoIP). The P-

2802HWL can use regular phone services through regular (PSTN) phone lines.

When you make a phone call over the Internet, you use a telephone (A) to dial the number.

The telephone is connected to your P-2802HW(L)-Ix (C), which provides Internet access.

When you want to use the Internet, you use your computer (B) which is connected to your

P-2802HW(L)-Ix.

When you want to configure the ZyXEL Device, you also use your computer.

This guide includes the following sections:

•Hardware Connections - shows you how to connect the P-2802HW(L)-Ix to your network,

your computer and telephone(s).

•Initial Configuration - shows you how to configure your P-2802HW(L)-Ix to access the Inter-

net, set up a wireless network and register a SIP account on the P-2802HW(L)-Ix.

•Regular Phone Line Setup (P-2802HWL only) - explains how to set up regular phone ser-

vices that do not use the Internet.

•Making Phone Calls - shows you how to make Voice over Internet (VoIP) or regular phone-

calls through the P-2802HW(L)-Ix.

P-2802HW(L)-Ix Series Quick Start Guide

1 Requirements

Make sure you have the following things before you set up your P-2802HW(L)-Ix.

• Internet access - account information provided by your ISP, such as user name, password,

and so on.

• VoIP account - You need the account information provided by your VoIP service provider

(the company that lets you make phone calls over the Internet).

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.

"See the User’s Guide for all configuration details.

To read the User’s Guide insert the CD that came in the box into your CD-ROM drive. A

screen should pop up. Navigate to the User’s Guide from this screen. If a screen does not

pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually

drive D:) and navigate to it from there.

P-2802HW(L)-Ix Series Quick Start Guide

2 Hardware Connections

1DSL: Use a telephone wire to connect this port to the DSL or MODEM jack on a splitter.

2LINE(P-2802HWL-Ix only): Use the green PSTN cable to connect the TEL or PHONE

jack on the splitter to this port. Connect the splitter to a telephone jack.

"When the P-2802HWL-Ix does not have power, the phone(s) connected to

the PHONE port(s) can still be used for making calls. Only one phone can

be in use at a time.

3 ETHERNET 1-4: Use an Ethernet cable to connect a computer to an ETHERNET port

for initial configuration and/or Internet access.

P-2802HW(L)-Ix Series Quick Start Guide

4 PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P-

2802HW(L)-Ix) to connect your telephones to these ports. If you only have one

telephone, you should use port 1.

5Use the power adaptor provided with your P-2802HW(L)-Ix to connect an appropriate

power source to this socket.

6Push the power switch to the on position.

Look at the LEDs (lights) on the side panel of the P-2802HW(L)-Ix.

•ThePOWER light blinks during start-up and is green once the P-

2802HW(L)-Ix is ready.

• Each ETHERNET light turns on if the corresponding ETHERNET port is

properly connected. The lights blink when the P-2802HW(L)-Ix is sending

or receiving data through the corresponding ETHERNET port.

•TheDSL light stays on if a physical DSL connection exists and blinks

when transmitting data. The INTERNET light stays on when Internet

access is available.

•ThePHONE lights stay on when your SIP account is registered and they

blink if the receiver is off the hook or there is an incoming call.

•TheWLAN light turns on when the wireless LAN is ready. It blinks when

the P-2802HW(L)-Ix is sending/receiving data through the wireless LAN.

If the PHONE 1 or PHONE 2 light is on, skip to Section 5 to see how to

make calls through the Internet.

If the INTERNET light comes on but the PHONE lights are off, go to

Section 3.3 and use the VOICE OVER INTERNET SETUP wizard.

If the INTERNET light is off but the DSL light is on, go to Section 3 and use the

INTERNET/WIRELESS SETUP wizard to configure your Internet access settings.

VCheck your connections if an LED does not turn on. Then turn the P-

2802HW(L)-Ix off, wait for a few seconds and turn it back on. See

Troubleshooting. If the problem remains, contact your local vendor.

P-2802HW(L)-Ix Series Quick Start Guide

3 Initial Configuration

1Open your browser and enter the P-

2802HW(L)-Ix's IP address 192.168.1.1

(default) as the URL.

2Enter the admin password 1234

(default). Click Login.

If your browser cannot find this screen,

make sure your browser is configured

correctly. See Troubleshooting in the

User’s Guide for details.

3Follow the directions in this screen. 4Click Apply to replace the P-

2802HW(L)-Ix’s default digital

certificate.

5Click Go to Wizard setup.

P-2802HW(L)-Ix Series Quick Start Guide

3.1 Connection Wizard

The connection wizard helps you set

up your Internet connection as well as

your wireless settings. Click

INTERNET/WIRELESS SETUP.

"Enter the Internet access information exactly as given to you by your ISP in

each wizard screen and then click Next to continue or click Back to return

to the previous screen.

Current screen information will be lost if you click Back.

P-2802HW(L)-Ix Series Quick Start Guide

STEP 1: Internet Configuration

"Each time you change the mode and click Next, the P-2802HW(L)-Ix

restarts automatically.

"If you were given Internet access settings, enter them in the following fields.

Otherwise leave the default settings and just click Next.

1Select Routing (default) from the

drop-down list box if your ISP give

you one IP address only and you

want multiple computers to share

an Internet account. Select

Bridge when your ISP provides

you more than one IP address and

you also want the connected

computers to get individual IP

address from ISP’s DHCP server

directly. If you select Bridge, you

cannot use Firewall, QoS, DHCP

server and NAT on the ZyXEL Device.

2If you select Bridge in the Mode field, click Next.

If you select Routing in the Mode field, select one connection type from the drop-down

list box. Check with your ISP to make sure you use the correct type:

•Ethernet

•PPPoE (PPP over Ethernet).

A Select Obtain an IP Address Automatically if your ISP did not assign you a fixed IP

address. Click Apply.

Select Static IP Address to give the P-2802HW(L)-Ix a fixed, unique IP address.

If you select Static IP Address,enter a WAN IP address, WAN IP Subnet Mask and the

neighboring device’s IP address given by your ISP.

If you were given DNS server settings, enter them in the fields. Otherwise leave the

default settings and just click Apply.

B Wait for the P-2802HW(L)-Ix to finish testing your WAN connection.

Ethernet Connection

P-2802HW(L)-Ix Series Quick Start Guide

A Type a User Name, Password and Service Name (Optional). Click Apply.

"When you use the connection wizard to configure the Internet access

using PPPoE, the P-2802HW(L)-Ix is set to get an IP address from the ISP

automatically. To set up a static WAN IP address with PPPoE, use the

Network > WAN screen. See your User’s Guide for detailed information.

B Wait for the P-2802HW(L)-Ix to finish testing your WAN connection.

PPP over Ethernet Connection

P-2802HW(L)-Ix Series Quick Start Guide

3If the connection test fails, the

screen displays as shown. Check if

your account is activated and click

the link in the screen to go back to

the wizard welcome screen to

reconfigure or verify your Internet

access settings.

STEP 2: Wireless LAN

After you configure the Internet access information, select Yes and click Next to configure

wireless settings.

To create a wireless network the P-2802HW(L)-Ix and your wireless computer(s) must all

use the same SSID (network name), channel and security settings.

If you do not set wireless security, any one within range could use your P-2802HW(L)-Ix to

access your network and the Internet.

A Select the Active check box to enable the wireless LAN on the P-2802HW(L)-Ix.

B Leave the Enable OTIST check box unselected.

C Choose WPA-PSK wireless security if your wireless device support it as it is stronger than

WEP.

D If you select either WEP or WPA-PSK security (recommended), follow the directions to

enter the appropriate key. Click Next to continue.

E Click Apply to save your wireless LAN settings.

F Use the read-only summary table to check whether what you have configured is correct

and write down your wireless LAN settings for later use. Click Return to Wizard Main

Page.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ZyXEL Communications Routeur réseau

ZyXEL Communications

ZyXEL Communications PMG5705-T10A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-663H-51 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P964 APR 964 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 971M Manuel utilisateur

ZyXEL Communications

ZyXEL Communications XS3800-28 Mode d’emploi

ZyXEL Communications

ZyXEL Communications PM7320-B0 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications DIMENSION ES-1124 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ES-1024B Guide de référence

ZyXEL Communications

ZyXEL Communications ES-105A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NBG4604 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NR2301 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-974H Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ES-2108 Guide de référence

ZyXEL Communications

ZyXEL Communications VES-1616F-44 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Brochure Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Dimension ES-4024 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-2602H-D1A Guide de référence

ZyXEL Communications

ZyXEL Communications G-120 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 202 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 642R Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications 660H/HW(-I) Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PMG2005-T20C Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-202H Plus v2 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité