ZyXEL Communications Omni.net D Manuel utilisateur

ZyXEL

OTAL

NTERNET

CCESS

OLUTION

omni.net Plus/D

ISDN Terminal Adapter

Quick Start Guide

GUI Configuration Manager l3Way Conference lCall Waiting

Call Forwarding lCall Hold/Retrieve lMultiple Subscriber Number

Advice of Charge lCaller ID Support lQuick Dial lIntercom

omni.net Plus/D Quick Start Guide

Table of Contents

1. Installation_____________________________________________________ 1-1

Front Panel Description ________________________________________________1-1

Back Panel Description and Connections (S/T Interface) ________________________1-4

Connect Your omni.net Plus/D (U interface) to ISDN Line _______________________1-5

Power On and Self Diagnostics___________________________________________1-6

2. Install Windows 95/98/NT Driver (INF file) _________________________ 2-1

Before Installation____________________________________________________2-1

Start Installing INF file ________________________________________________2-2

3. Install ZyXEL ISDN Configuration Manager for Windows 95/98/NT ______ 3-1

4. Setup ZyXEL ISDN Configuration Manager for Windows 3.x ____________ 4-1

Customer Support____________________________________________________ 4-2

omni.net Plus/D Quick Start Guide

1-1

1.Installation

Thank you for choosing ZyXEL ISDN Terminal Adapter (ISDN TA) as your device for

connecting ISDN. This section is designed to guide you through a quick and correct installation

of your new omni.net Plus or omni.net D.

The following graphics are only displayed for the omni.net Plus. However, since the front panel

and back panel of omni.net Plus and omni.net D are almost identical, all installation steps

below can be applied to both of the omni.net Plus and the omni.net D unless specifically noted.

Front Panel Description

LNK

PWR

DTR

CTS

RTS

DSR

Front Panel

Switch

Phone 1 & Phone 2

for omni.net Plus only

omni.net Plus/D Quick Start Guide

1-2

Front Panel LEDs

LED Function Active Description

PWR

Power LED On When the power is turned ON.

LNK

Link LED On

Blinking

When the link with the local ISDN switch is active.

When attempting to make a connection.

B1 Channel On When the B1 channel is established.

B2 Channel On When the B2 channel is established.

Auto-Answer On

Blinking

When your ISDN TA is in Auto Answer mode.

When your TA rings.

Compression On

When Data Compression is being used over one or more

of the B Channels. Compression types are Hi/fn LZS

(formerly Stac) for PPP connections, and V.42bis for

V.120 or X.75 connections.

DTR

Data Terminal

Ready On When the DTE or computer connected to the DTE

port signals that it is ready for communication by

establishing the RS-232 link.

DSR

Data Set

Ready On

When the modem is ready for communication with the

DTE.

RTS Request To Send

When the DTE has datato be sent to the remote modem.

The RTS signal is used in Hardware Handshaking.

CTS Clear To Send

When the modem is ready to receive data from the

remote modem. The CTS signal is used in Hardware

Handshaking.

Transmit Data Blinking When the DTE/Computer transmits data to the

DTE port.

Receive Data On When the DTE/Computer receives data from the

DTE port.

Phone 1

(for omni.net

Plus only)

When the POTS port 1 telephone/handset is off-hook.

Phone 2

(for omni.net

Plus only)

When the POTS port 2 telephone/handset is off-hook.

omni.net Plus/D Quick Start Guide

1-3

Front Panel Switch

When the TA is in command state, pressing the front panel button causes it to dial the default

phone number pre-stored in the NVRAM. The default number pointer to the telephone

directory is assigned by the AT*Dncommand.

When the TA is on-line, pressing the button will tear down the connection and bring it into

command state.

omni.net Plus/D Quick Start Guide

1-4

Back Panel Description and Connections (S/T Interface)

Back Panel Switch and Connectors

ON/OFF

Power ON/OFF switch

POWER Input terminal for power adapter.

To DTE Serial port DB-25 female connector for connection to the serial port of a DTE

(computer/terminal).

ISDN ISDN RJ-45 terminal jack; connects to a S/T interface or a U interface.

PHONE 1 RJ-11 terminal jack for analog adapter 1; for connecting to analog equipment. (phone,

fax, answering machine, etc.)

PHONE 2 RJ-11 terminal jack for analog adapter 2; for connecting to analog equipment. (phone,

fax, answering machine, etc.)

Tel

Fax

Power

Outlet

Power

Adapter

NT-1 Device

To DTE

Power

Input

Power ON/OFF

Switch Phone 2

Phone 1

ISDN

Phone 1 & Phone 2

for omni.net Plus only

Computer

omni.net Plus/D Quick Start Guide

1-5

Connect Your omni.netPlus/D (U interface) to ISDN Line

Connect one end of the RJ-45 connectors to the “ISDN U”jack, and another end to

your wall jack, as the following illustration:

Phone 1 & Phone 2

for omni.net Plus only

omni.net Plus/D Quick Start Guide

1-6

Power On and Self Diagnostics

Once you have completed all of the installation steps above, flip the omni On/Off switch to the

ON (up) position.The unit starts a self-test sequence, where you should see a series of LED

lights blinking (LED, B1, B2, AA). After this cycle is complete, the PWR light should stay on.

If the test routine fails, the LNK LED flashes. Refer to your omni.net Plus/D Technical

Reference for more information on self-tests and error codes.

If you have a communication program loaded and active (connected to the same serial port as

the omni), you should see the DTR LED should be ON after the self-test.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ZyXEL Communications Adaptateur

ZyXEL Communications

ZyXEL Communications DMA-1000 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-402 v3 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD-271N - Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-4xx Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyAIR G-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-2024 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications DMA-1000 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications OMNI.NET LITE Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD-271N - Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-210H Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYAIR B-200 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications WM5204Z Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA4215 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-162 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyAIR G-200 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications WPA-1000 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA6456 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications 2002 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-202 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA4111 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-400 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-220 V2 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD-210N - V1.0 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

ZyXEL Communications omni.net D Manuel utilisateur

Manuels Adaptateur populaires d'autres marques