ZUMEX Speed Pro + Plus Guide de configuration

Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com

Cleaning instructions

Take off the feeder basket.

Remove the stainless-steel peel guides.

Turn the knobs and take off the front cover

as well as the side outputs.

Remove the Pressing Kit by pulling it

towards you with the stainless-steel hand-

les.

Remove the waste trolleys from the base

to empty them.

Take off the feeder plate by unscrewing the

central knob.

Press the side tabs to remove the bin.

Take off the automatic PulpOut System, by

lifting the assembly with the part closest to

you.

Remove the blade by pressing on the centre

and pulling the handle towards you.

Caution! Be careful not to cut yourself.

Clean inside the base with a soft sponge.

Insert the cleaning brush into the Drain&Clean

hole in the base of the feeder, removing any

residue that you may find in the tube.

Unscrew the central knob of the Pressing

Unit.

Remove the 2Services tap by easily un-

screwing it.

Clean the front part of the machine with a

soft sponge.

Once all the parts have been disassembled,

proceed to deep clean the machine.

The cleaning process will be explained in details for each one of the machine’s components below.

Caution! For a correct cleaning process, please follow the instructions

below. Before getting started, make sure that the machine is nplugged

from mains power.

Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com

Cleaning instructions for components

All the parts, with the exception of the cover and the tap,

can be put in a dishwasher to clean them.

Cleaning of the extraction area and any of its removable

parts must be done with a sponge soaked in soapy water

suitable for food use. Do not use scouring sponges that

could scratch the surfaces.

It is necessary to sterilise the machine with a disinfectant

product after each cleaning.

Rinse with plenty of water after sterilising, in order to

remove any remaining disinfectant.

Cleanliness and hygiene warnings

It is necessary to clean all parts that come into contact with the juice each day.

Blade, sub-filter, bin, peel guides, feed plate,

front cover, and tap

Pressing assembly

Daily cleaning

Clean the blade, sub-filter, bin, and peel

guides piece by piece with soapy water and

then rinse with clean water.

Remove the side outputs from the front

cover.

Clean the entire assembly with a sponge

and soap in a single piece under a tap. Move

the juicing heads around to make sure that

they are completely clean.

Clean the side outputs and the central part

of the cover with a soft sponge to avoid da-

maging the material. Rinse with plenty of

water.

The assembly can also be washed in

a single piece in a dishwasher.

To clean quickly,

clean the Pressing Kit assembly

in a single piece under a tap or

in a dishwasher.

Clean the feeding plate with a soft sponge

to remove the remaining particles still stuck

to it.

Clean the whole tap by letting soapy water

run through the spout. Brush well at both

holes.

1 2 3

1 2

4 5

Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com

Cleaning instructions for components

Automatic PulpOut System

Remove the black upper lid by pushing

upwards on the tabs sticking out.

All the parts can be cleaned by hand with a

soft sponge and soapy water.

Rest the PulpOut system on a flat surface

and disassemble the side cover, holding it

from above to remove the ends of the gui-

des.

Remove the sweeping belt together with

the other roller and remove both parts.

Turn the assembly around and place your

fingers on the sweeping belt by pushing it

outwards to release it.

All the parts can also be washed in a dish-

washer.

Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com

Recommended cleaning instructions

Cover, Pressing Kit, and PulpOut System

2Services Tap

Midday cleaning

Weekly cleaning

Turn the knobs and take off the front cover

as well as the side outputs.

Remove the upper part of the tap by twis-

ting the matte thread.

Remove the Pressing Kit by pulling it

towards you with the stainless-steel hand-

les.

Clean the front area of the machine with a

soft sponge and rinse with a damp paper

towel or water.

Remove the automatic PulpOut System by

lifting the assembly with the part closest to

you.

Clean the tube and piston with the brush

supplied with soapy water.

Remove the blade by pressing on the centre

and pulling the handle towards you.

Caution! Be careful not to cut yourself.

Unscrew the central knob of the Pressing

Kit.

Remove the sub-filter and throw away its

contents.

To clean the parts that have

been removed, follow the

general instructions for daily

cleaning.

Replacing parts.

For quick cleaning in the middle

of the day, we recommend

having a kit with spare parts.

This Kit is made up of: a cover,

pressing kit, and PulpOut

system.

Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com

Recommended cleaning instructions

Pressing assembly

Weekly cleaning

Drain&Clean

Fortnightly cleaning

Insert the cleaning brush into the Drain&Clean

hole in the base of the feeder and remove

any residue that you may find in the draina-

ge tube.

Lift the stainless-steel handles

For deep cleaning, disassemble

the Pressing Kit and clean all

the parts.

Remove the juicing heads.

Remove the peel ejectors located on the si-

des at the bottom.

Clean all the parts with a sponge and soap,

rinse after with clean water. All the parts

can also be washed in a dishwasher.

the knob located on the lower central part.

Table des matières

Autres manuels ZUMEX presse-agrumes

ZUMEX

ZUMEX MINEX Manuel utilisateur

ZUMEX

ZUMEX essential Manuel utilisateur

ZUMEX

ZUMEX essential Manuel utilisateur

ZUMEX

ZUMEX ZUMEX SPEED Manuel utilisateur

ZUMEX

ZUMEX MINEX Manuel utilisateur

ZUMEX

ZUMEX Zumex Manuel utilisateur

ZUMEX

ZUMEX Z-450 Manuel utilisateur

ZUMEX

ZUMEX Speed Pro Manuel utilisateur

ZUMEX

ZUMEX MULTIFRUIT SPEED CONTROL Manuel utilisateur

ZUMEX

ZUMEX Multifruit Manuel utilisateur

ZUMEX

ZUMEX Multifruit Manuel utilisateur

ZUMEX

ZUMEX PUSH&JUICE Manuel utilisateur

ZUMEX

ZUMEX ESSENTIAL PRO Manuel utilisateur

ZUMEX

ZUMEX Speed Pro Manuel utilisateur

ZUMEX

ZUMEX Multifruit Manuel utilisateur

ZUMEX

ZUMEX Versatile Pro Cashless Manuel utilisateur

ZUMEX

ZUMEX PUSH&JUICE Soul Manuel utilisateur

ZUMEX

ZUMEX Speed S +plus Instructions d'installation

ZUMEX

ZUMEX MINEX Manuel utilisateur

ZUMEX

ZUMEX ESSENTIAL PRO Guide de configuration

ZUMEX

ZUMEX Speed Up Instructions d'installation

ZUMEX

ZUMEX Speed S+ Manuel utilisateur

ZUMEX

ZUMEX Speed Up Citric Active Manuel utilisateur

ZUMEX

ZUMEX MINEX Manuel utilisateur

Manuels presse-agrumes populaires d'autres marques

GE 169201 Manuel utilisateur

Exquisit

Exquisit ZP 3001 WET Manuel utilisateur

Philips

Philips HR1851 Manuel utilisateur

Sam Cook

Sam Cook MASTERCHEF EXECUTIVE PSC-50 Manuel utilisateur

Termozeta

Termozeta spremiagrumi Manuel utilisateur

ElectrIQ

ElectrIQ WF1000 Manuel utilisateur

Bella

Bella WHOLE FRUIT JUICER Manuel utilisateur

HAEGER

HAEGER Little Juice CJ-025 006A Manuel utilisateur

Havells

Havells Fusion Manuel utilisateur

Siemens

Siemens MK554 SERIES Manuel utilisateur

Beper

Beper 90.302B Guide rapide

NATURSAFT

NATURSAFT 015.401.3 Manuel utilisateur

Moulinex

Moulinex BKB 2 Manuel utilisateur

Royal Catering

Royal Catering RCJU-01 Manuel utilisateur

camry

camry CR 4002 Manuel utilisateur

AIGOSTAR

AIGOSTAR 30HIM Manuel utilisateur

Skymsen

Skymsen EX Manuel utilisateur

Bodum

Bodum 3021 / 3022 Manuel utilisateur